Windows curved slicing error

[Alejandro Rodriguez]

In Windows 11 it says "Processing error unable to save dump\0.dmin.png" in Linux with the same configuration it works, I think it may be due to prohibited characters in the file name. only fails with "curve slicing"

[Sylvain Lefebvre]

Hi Alejandro, thanks for the report. This is likely due to debug files still active in the build... A workaround is to create a 'dump' folder in the folder where the input file resides. We will fix this asap!

Best regards
Sylvain

Le sam. 9 nov. 2024, 16:56, Alejandro Rodriguez <alexrl...@gmail.com> a écrit :

In Windows 11 it says "Processing error unable to save dump\0.dmin.png" in Linux with the same configuration it works, I think it may be due to prohibited characters in the file name. only fails with "curve slicing"

--
You received this message because you are subscribed to the Google Groups "IceSL" group.
To unsubscribe from this group and stop receiving emails from it, send an email to icesl+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/icesl/c93806bc-461e-4450-a9ab-316d5e962e4cn%40googlegroups.com.

[Re-try WhenDown]

Hi all. A hotfix has been deployed on the website. Curved slicing should be functional now.

I take this opportunity to announce that we will be at Humanoids 2024 showing off IceSL and specially curved printing. In case you’re in the area, feel free to visit us. Registration to the event is free.

Le 10 nov. 2024 à 07:40, Sylvain Lefebvre <sylvain....@gmail.com> a écrit :



To view this discussion visit https://groups.google.com/d/msgid/icesl/CAM47g4XHW7Kfih-UmEGE2xMCGDY%3DU_X1jaLepV%3DJK0bwbTY%3DQQ%40mail.gmail.com.

[Ryan Hitcho]

Hi Salim,

Thank you for the hotfix. 

A quick question as to what might be going on here.

**ASSERT FAILED** flow_mul >= 0.0f, file /home/icesl/Documents/Work/icesl-next/libicesl/libfdm/src/GCode.cpp, line 1539

I have tried slicing with my typical profile and it exports.

When I enable curved_slicing I get the above error.

There is a resulting gcode file with the extension being .gcode_body

Best of luck at the conference! 

No rush here. I realise you guys are probably busy for the conference.

[Re-try WhenDown]

Hi Ryan. This is indeed a bug. Do you think you could send us (privately) the model (or script) you used and your printing settings. If you didn’t set any parameter, send us your printer profile (unless it’s in IceSL already). Thanks!!

Le 12 nov. 2024 à 16:01, Ryan Hitcho <ryan....@gmail.com> a écrit :

Hi Salim,

To view this discussion visit https://groups.google.com/d/msgid/icesl/f15932e2-fb37-4747-a8ff-bef506e6ef8en%40googlegroups.com.

[sylefeb]

Hi Ryan, I have a fix, we will make a new beta available soon. Thank you!