Re: Özel iletinin konusu: Jerky movement during solid fill / perimeter.

[Re-try WhenDown]

Hi Mehmet.

You can do this in a script. No need to go down the pipeline until machine code (i.e., gcode) production.

In the lua script where you specify your geometry, code a loop that processes the geometry on each layer height. For each “slice” do an intersection with a thin (layer thickness) cube and use ‘bbox’ to calculate an approximate perimeter. With this data you can decide the value of any printing parameter (e.g., speed) using ‘set_setting_value’ per-layer.

Hope this helps.

Salim

Le 21 nov. 2023 à 13:23, Re-try WhenDown <salim....@gmail.com> a écrit :



Hi Mehmet

I will ask to our printing technician about the adoption potential of this feature to see if it’s worth coding it.

Should it be feasible, I’ll let you know.

Le 16 nov. 2023 à 22:09, Mehmet Özbek <mozb...@gmail.com> a écrit :

Hi,

Thank you for your reply. I solved the shaking problem by changing the tolerance.Surface quality is ok.

Processing:
Disc. step in xy :0.1
Counter deviation::0.03

I will make your suggestions about PLA printing..Thanks.

It may sound ridiculous, but I have a suggestion. You can calculate the area or perimeter of each closed section. For example, can there be an option to reduce the speed by % in small areas?
For example; If the cross-sectional area is less than (or multiple area defination ) 10 mm^2, reduce the speed by 50%. 

It would be perfect, like layer height optimization in Icesl. Vibrations/jerky movements will decrease on small areas. 

I hope this setting does not already exist :)

15 Kasım 2023 Çarşamba tarihinde saat 16:35:27 UTC+3 itibarıyla salim....@gmail.com şunları yazdı:

Hi Mehmet. Allow me to answer your questions.

Unfortunately, we don't have a profil for this specific printer. You can submit it via merge request in our printer profiles github and we'll see if it's apt for inclusion in the official relese of IceSL!

GitHub - shapeforge/icesl-printers: Printer scripts and profiles for IceSL

The gaps you're having is a known problem of the way IceSL calculates covers, we are actively searching the best way to prevent this. In the meanwhile, you can avoid this issue by adding more shells to the whole print or just in a small section via per-layer specification (see the screenshot below):

Finally, regarding the noisy surface due to what you describe 'jerky movement', we could not reproduce it. We printed a couple times the stl and found the surfaces to be appropriate. However, we used a different printer as we don't have your specific  model. We can give you some tips that can ameliorate the situation; (a) deformations can occur because the plastic doesn't have enough time to cool down, try using a temperature of 190 degrees, (b) if you can/desire, print the model twice so the printer layers have more time to cool down, (c) reduce layer height. This will increase quality but also print time and lastly, (d) leave the door open on your printer when you're printing with PLA.

Hope this helps!

Le lun. 13 nov. 2023 à 17:56, Mehmet Özbek <mozb...@gmail.com> a écrit :

Thank you for accepting me into the group.

I have a Flashforge Advanturer 3 printer.I was using Flashprint software, but after seeing ICESL 2.3.5 Beta2 , I don't use it anymore.
The surface quality of ICESL complex parts is quite good. But I'm having problems with circular slices like the attached piece.
My main problem is Jerky movement during solid fill / perimeter.
Can you help me with which settings should I play with?
Attached files:

3D model: PROBLEM.stl
Flashforge Advanturer 3.zip : My printer profile.
PROBLEM1.jpg : Result printed.

PROBLEM2.jpg : Gap header.dat: Unfortunately, the Flashforge gx format is a little different. I have to put this binary file at the beginning of the gcode..Otherwise the printer does not work. If you want, we can look at this together.

ICESL_GCODE.gcode: ICESL original g-code for Advanturer3/4
ICESL_GCODE_ADD HEADER.gx: Added binary header.dat at the start of gcode.
1- My first question is, is there a Flash forge Advanturer 3 profile?   There may also be a problem with my printer profile.

2- How can I get rid of jerky movement during solid fill / perimeter ?PROBLEM1.jpg

3- I can't fill in the gaps between the sphere and the cone.PROBLEM2.jpg Thanks,

--
You received this message because you are subscribed to the Google Groups "IceSL" group.
To unsubscribe from this group and stop receiving emails from it, send an email to icesl+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/icesl/4c4d9d27-67d3-4a27-86fb-e10f20c32675n%40googlegroups.com.