problems with installation

[Silvana Temesio]

First of all congratulations for the tool but I couldn`t install
I`ve tried over windows with xampp, I have created a user qubit and a
database associated with all grants. I began the installation, the
check was ok and the load of the data on table (mysql) was ok ( 53
tables were created) but al last there was an error:

Conexión interrumpida


La conexión con el servidor http://localhost/icaatom-1.0.7/web/install.php/sfInstallPlugin/loadData
fue restablecida mientras se cargaba la página.



El enlace de red fue cortado al negociar una conexión. Intente
nuevamente.

And then I couldn`t go on.
I`m a librarian and archivistic teacher and I'm trying to deploy the
software for teaching to my students at EUBCA in Uruguay.
Thanks in advance for your help

Silvana Temesio

[Evelyn McLellan]

Hi Silvana,

Thank you for your question. We're very pleased to hear that ICA-AtoM
is being tested in Uruguay! I have forwarded your message to one of
our developers, who will get back to you as soon as he can.

Evelyn McLellan
ICA-AtoM Community Manager

On Sep 4, 1:17 pm, Silvana Temesio <steme...@gmail.com> wrote:
> First of all congratulations for the tool but I couldn`t install
> I`ve tried over windows with xampp, I have created a user qubit and a
> database associated with all grants. I began the installation, the
> check was ok and the load of the data on table (mysql) was ok ( 53
> tables were created)  but al last there was an error:
>
> Conexión interrumpida
>

> La conexión con el servidorhttp://localhost/icaatom-1.0.7/web/install.php/sfInstallPlugin/loadData

[David Juhasz]

Hi Silvana,

It sounds like you may be running out of memory while the installer load
the system data. Please see this wiki page for suggestions on
increasing your memory_limit:

http://qubit-toolkit.org/wiki/index.php?title=Installer_Warnings#Allowed_memory_size_exceeded

Regards,

--
David Juhasz,
Software Engineer, Artefactual Systems Inc.
http://www.artefactual.com | P: 604.527.2056 | F: 604.521.2059

[ptrem]

Hi David,

I have exactly the same issue as Silvana during installation of ica-
atom 1.0.7 (on windows using xampp) :

- check is OK
- 53 tables are created

but I get an "interrupted connection" :

"Connexion interrompue
La connexion avec le serveur a été réinitialisée pendant le
chargement de la page.
La liaison au réseau a été interrompue pendant la négociation d'une
connexion. Veuillez réessayer."

and the displayed url is then : http://localhost/icaatom/install.php/sfInstallPlugin/loadData

I did however define all the "php.ini" parameters as described in
http://qubit-toolkit.org/wiki/index.php?title=Xampp_installation.

I even tried to double the recommended value as follows :

memory_limit = 256M
max_execution_time = 240

but I have still the error.... Any idea ?

Here is my last "error_log" info (I have setted the httpd.conf
LogLevel to "debug") :

[Fri Sep 18 11:29:08 2009] [notice] Parent: child process exited with
status 3221225477 -- Restarting.
[Fri Sep 18 11:29:08 2009] [notice] Digest: generating secret for
digest authentication ...
[Fri Sep 18 11:29:08 2009] [notice] Digest: done
[Fri Sep 18 11:29:08 2009] [info] Init: Seeding PRNG with 136 bytes of
entropy
[Fri Sep 18 11:29:09 2009] [info] Loading certificate & private key of
SSL-aware server
[Fri Sep 18 11:29:09 2009] [debug] ssl_engine_pphrase.c(469):
unencrypted RSA private key - pass phrase not required
[Fri Sep 18 11:29:09 2009] [info] Init: Generating temporary RSA
private keys (512/1024 bits)
[Fri Sep 18 11:29:09 2009] [info] Init: Generating temporary DH
parameters (512/1024 bits)
[Fri Sep 18 11:29:09 2009] [debug] ssl_scache_shmcb.c(253): shmcb_init
allocated 512000 bytes of shared memory
[Fri Sep 18 11:29:09 2009] [debug] ssl_scache_shmcb.c(272): for 511952
bytes (512000 including header), recommending 32 subcaches, 133
indexes each
[Fri Sep 18 11:29:09 2009] [debug] ssl_scache_shmcb.c(306):
shmcb_init_memory choices follow
[Fri Sep 18 11:29:09 2009] [debug] ssl_scache_shmcb.c(308):
subcache_num = 32
[Fri Sep 18 11:29:09 2009] [debug] ssl_scache_shmcb.c(310):
subcache_size = 15996
[Fri Sep 18 11:29:09 2009] [debug] ssl_scache_shmcb.c(312):
subcache_data_offset = 2144
[Fri Sep 18 11:29:09 2009] [debug] ssl_scache_shmcb.c(314):
subcache_data_size = 13852
[Fri Sep 18 11:29:09 2009] [debug] ssl_scache_shmcb.c(316): index_num
= 133
[Fri Sep 18 11:29:09 2009] [info] Shared memory session cache
initialised
[Fri Sep 18 11:29:09 2009] [info] Init: Initializing (virtual) servers
for SSL
[Fri Sep 18 11:29:09 2009] [info] Configuring server for SSL protocol
[Fri Sep 18 11:29:09 2009] [debug] ssl_engine_init.c(414): Creating
new SSL context (protocols: SSLv2, SSLv3, TLSv1)
[Fri Sep 18 11:29:09 2009] [debug] ssl_engine_init.c(610): Configuring
permitted SSL ciphers [ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:
+SSLv2:+EXP:+eNULL]
[Fri Sep 18 11:29:09 2009] [debug] ssl_engine_init.c(370): Configuring
TLS extension handling
[Fri Sep 18 11:29:09 2009] [debug] ssl_engine_init.c(741): Configuring
RSA server certificate
[Fri Sep 18 11:29:09 2009] [debug] ssl_engine_init.c(780): Configuring
RSA server private key
[Fri Sep 18 11:29:09 2009] [info] mod_ssl/2.2.12 compiled against
Server: Apache/2.2.12, Library: OpenSSL/0.9.8k
[Fri Sep 18 11:29:09 2009] [notice] Apache/2.2.12 (Win32) DAV/2
mod_ssl/2.2.12 OpenSSL/0.9.8k mod_autoindex_color PHP/5.3.0 mod_perl/
2.0.4 Perl/v5.10.0 configured -- resuming normal operations
[Fri Sep 18 11:29:09 2009] [notice] Server built: Jul 22 2009 11:35:54
[Fri Sep 18 11:29:09 2009] [notice] Parent: Created child process 2760
[Fri Sep 18 11:29:09 2009] [debug] mpm_winnt.c(487): Parent: Sent the
scoreboard to the child
[Fri Sep 18 11:29:10 2009] [info] Init: Seeding PRNG with 136 bytes of
entropy
[Fri Sep 18 11:29:10 2009] [info] Loading certificate & private key of
SSL-aware server
[Fri Sep 18 11:29:10 2009] [debug] ssl_engine_pphrase.c(469):
unencrypted RSA private key - pass phrase not required
[Fri Sep 18 11:29:10 2009] [info] Init: Generating temporary RSA
private keys (512/1024 bits)
[Fri Sep 18 11:29:10 2009] [info] Init: Generating temporary DH
parameters (512/1024 bits)
[Fri Sep 18 11:29:10 2009] [info] Init: Initializing (virtual) servers
for SSL
[Fri Sep 18 11:29:10 2009] [info] Configuring server for SSL protocol
[Fri Sep 18 11:29:10 2009] [debug] ssl_engine_init.c(414): Creating
new SSL context (protocols: SSLv2, SSLv3, TLSv1)
[Fri Sep 18 11:29:10 2009] [debug] ssl_engine_init.c(610): Configuring
permitted SSL ciphers [ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:
+SSLv2:+EXP:+eNULL]
[Fri Sep 18 11:29:10 2009] [debug] ssl_engine_init.c(370): Configuring
TLS extension handling
[Fri Sep 18 11:29:10 2009] [debug] ssl_engine_init.c(741): Configuring
RSA server certificate
[Fri Sep 18 11:29:10 2009] [debug] ssl_engine_init.c(780): Configuring
RSA server private key
[Fri Sep 18 11:29:10 2009] [info] mod_ssl/2.2.12 compiled against
Server: Apache/2.2.12, Library: OpenSSL/0.9.8k
[Fri Sep 18 11:29:10 2009] [notice] Digest: generating secret for
digest authentication ...
[Fri Sep 18 11:29:10 2009] [notice] Digest: done
[Fri Sep 18 11:29:10 2009] [info] Init: Seeding PRNG with 136 bytes of
entropy
[Fri Sep 18 11:29:11 2009] [info] Loading certificate & private key of
SSL-aware server
[Fri Sep 18 11:29:11 2009] [debug] ssl_engine_pphrase.c(469):
unencrypted RSA private key - pass phrase not required
[Fri Sep 18 11:29:11 2009] [info] Init: Generating temporary RSA
private keys (512/1024 bits)
[Fri Sep 18 11:29:11 2009] [info] Init: Generating temporary DH
parameters (512/1024 bits)
[Fri Sep 18 11:29:11 2009] [debug] ssl_scache_shmcb.c(253): shmcb_init
allocated 512000 bytes of shared memory
[Fri Sep 18 11:29:11 2009] [debug] ssl_scache_shmcb.c(272): for 511952
bytes (512000 including header), recommending 32 subcaches, 133
indexes each
[Fri Sep 18 11:29:11 2009] [debug] ssl_scache_shmcb.c(306):
shmcb_init_memory choices follow
[Fri Sep 18 11:29:11 2009] [debug] ssl_scache_shmcb.c(308):
subcache_num = 32
[Fri Sep 18 11:29:11 2009] [debug] ssl_scache_shmcb.c(310):
subcache_size = 15996
[Fri Sep 18 11:29:11 2009] [debug] ssl_scache_shmcb.c(312):
subcache_data_offset = 2144
[Fri Sep 18 11:29:11 2009] [debug] ssl_scache_shmcb.c(314):
subcache_data_size = 13852
[Fri Sep 18 11:29:11 2009] [debug] ssl_scache_shmcb.c(316): index_num
= 133
[Fri Sep 18 11:29:11 2009] [info] Shared memory session cache
initialised
[Fri Sep 18 11:29:11 2009] [info] Init: Initializing (virtual) servers
for SSL
[Fri Sep 18 11:29:11 2009] [info] Configuring server for SSL protocol
[Fri Sep 18 11:29:11 2009] [debug] ssl_engine_init.c(414): Creating
new SSL context (protocols: SSLv2, SSLv3, TLSv1)
[Fri Sep 18 11:29:11 2009] [debug] ssl_engine_init.c(610): Configuring
permitted SSL ciphers [ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:
+SSLv2:+EXP:+eNULL]
[Fri Sep 18 11:29:11 2009] [debug] ssl_engine_init.c(370): Configuring
TLS extension handling
[Fri Sep 18 11:29:11 2009] [debug] ssl_engine_init.c(741): Configuring
RSA server certificate
[Fri Sep 18 11:29:11 2009] [debug] ssl_engine_init.c(780): Configuring
RSA server private key
[Fri Sep 18 11:29:11 2009] [info] mod_ssl/2.2.12 compiled against
Server: Apache/2.2.12, Library: OpenSSL/0.9.8k
[Fri Sep 18 11:29:11 2009] [notice] Child 2760: Child process is
running
[Fri Sep 18 11:29:11 2009] [debug] mpm_winnt.c(408): Child 2760:
Retrieved our scoreboard from the parent.
[Fri Sep 18 11:29:11 2009] [info] Parent: Duplicating socket 124 and
sending it to child process 2760
[Fri Sep 18 11:29:11 2009] [info] Parent: Duplicating socket 120 and
sending it to child process 2760
[Fri Sep 18 11:29:11 2009] [debug] mpm_winnt.c(605): Parent: Sent 2
listeners to child 2760
[Fri Sep 18 11:29:11 2009] [debug] mpm_winnt.c(564): Child 2760:
retrieved 2 listeners from parent
[Fri Sep 18 11:29:11 2009] [notice] Child 2760: Acquired the start
mutex.
[Fri Sep 18 11:29:11 2009] [notice] Child 2760: Starting 150 worker
threads.
[Fri Sep 18 11:29:11 2009] [notice] Child 2760: Starting thread to
listen on port 443.
[Fri Sep 18 11:29:11 2009] [notice] Child 2760: Starting thread to
listen on port 80.

[Andreas Nef]

Hi

Could you post the access_log as well? I had to set the
max_execution_time even higher, as the equipment here in place is
really old. Additionally, could you post the my.ini file? I had some
issues there as well regarding strict mode and character sets. What if
you use qubit_dev.php instead of install.php for the database
configuration steps during the installation process?

Andreas

[ptrem]

Hi Andreas,

Thanks a lot for your reply.

Here is an extract of my "access_log" (3 last tries):

127.0.0.1 - - [18/Sep/2009:11:04:29 +0200] "POST /icaatom/install.php/
sfInstallPlugin/configureDatabase HTTP/1.1" 302 132 "http://localhost/
icaatom/install.php/sfInstallPlugin/configureDatabase" "Mozilla/5.0
(Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/
3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:11:06:31 +0200] "POST /icaatom/install.php/
sfInstallPlugin/configureDatabase HTTP/1.1" 302 132 "http://localhost/
icaatom/install.php/sfInstallPlugin/configureDatabase" "Mozilla/5.0
(Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/
3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:11:28:37 +0200] "POST /icaatom/install.php/
sfInstallPlugin/configureDatabase HTTP/1.1" 302 132 "http://localhost/
icaatom/install.php/sfInstallPlugin/configureDatabase" "Mozilla/5.0
(Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/
3.0.14 (.NET CLR 3.5.30729)"

here is my current "php.ini" (I have tried to increase several "sizes"
but I still have the error", I also have a one year old Dell T7400
station, which should be more than powerful enaough...) :

[PHP]

;;;;;;;;;;;;;;;;;;;
; About php.ini ;
;;;;;;;;;;;;;;;;;;;
; PHP's initialization file, generally called php.ini, is responsible
for
; configuring many of the aspects of PHP's behavior.

; PHP attempts to find and load this configuration from a number of
locations.
; The following is a summary of its search order:
; 1. SAPI module specific location.
; 2. The PHPRC environment variable. (As of PHP 5.2.0)
; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
; 4. Current working directory (except CLI)
; 5. The web server's directory (for SAPI modules), or directory of
PHP
; (otherwise in Windows)
; 6. The directory from the --with-config-file-path compile time
option, or the
; Windows directory (C:\windows or C:\winnt)
; See the PHP docs for more specific information.
; http://php.net/configuration.file

; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably
guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.

; Directives following the section heading [PATH=/www/mysite] only
; apply to PHP files in the /www/mysite directory. Directives
; following the section heading [HOST=www.example.com] only apply to
; PHP files served from www.example.com. Directives set in these
; special sections cannot be overridden by user-defined INI files or
; at runtime. Currently, [PATH=] and [HOST=] sections only work under
; CGI/FastCGI.
; http://php.net/ini.sections

; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from
FOO=bar.
; Directives are variables used to configure PHP or PHP extensions.
; There is no name validation. If PHP can't find an expected
; directive because it is not set or is mistyped, a default value will
be used.

; The value can be a string, a number, a PHP constant (e.g. E_ALL or
M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an
expression
; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to
a
; previously set variable or directive (e.g. ${foo})

; Expressions in the INI file are limited to bitwise operators and
parentheses:
; | bitwise OR
; ^ bitwise XOR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT

; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.

; An empty string can be denoted by simply not writing anything after
the equal
; sign, or by using the None keyword:

; foo = ; sets foo to an empty string
; foo = None ; sets foo to an empty string
; foo = "None" ; sets foo to the string 'None'

; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend
extension),
; you may only use these constants *after* the line that loads the
extension.

;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; PHP comes packaged with two INI files. One that is recommended to be
used
; in production environments and one that is recommended to be used in
; development environments.

; php.ini-production contains settings which hold security,
performance and
; best practices at its core. But please be aware, these settings may
break
; compatibility with older or less security conscience applications.
We
; recommending using the production ini in production and testing
environments.

; php.ini-development is very similar to its production variant,
except it's
; much more verbose when it comes to errors. We recommending using the
; development version only in development environments as errors shown
to
; application users can inadvertently leak otherwise secure
information.

;;;;;;;;;;;;;;;;;;;
; Quick Reference ;
;;;;;;;;;;;;;;;;;;;
; The following are all the settings which are different in either the
production
; or development versions of the INIs with respect to PHP's default
behavior.
; Please see the actual settings later in the document for more
details as to why
; we recommend these changes in PHP's behavior.

; allow_call_time_pass_reference
; Default Value: On
; Development Value: Off
; Production Value: Off

; display_errors
; Default Value: On
; Development Value: On
; Production Value: Off

; display_startup_errors
; Default Value: Off
; Development Value: On
; Production Value: Off

; error_reporting
; Default Value: E_ALL & ~E_NOTICE
; Development Value: E_ALL | E_STRICT
; Production Value: E_ALL & ~E_DEPRECATED

; html_errors
; Default Value: On
; Development Value: On
; Production value: Off

; log_errors
; Default Value: Off
; Development Value: On
; Production Value: On

; magic_quotes_gpc
; Default Value: On
; Development Value: Off
; Production Value: Off

; max_input_time
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)

; output_buffering
; Default Value: Off
; Development Value: 4096
; Production Value: 4096

; register_argc_argv
; Default Value: On
; Development Value: Off
; Production Value: Off

; register_long_arrays
; Default Value: On
; Development Value: Off
; Production Value: Off

; request_order
; Default Value: None
; Development Value: "GP"
; Production Value: "GP"

; session.bug_compat_42
; Default Value: On
; Development Value: On
; Production Value: Off

; session.bug_compat_warn
; Default Value: On
; Development Value: On
; Production Value: Off

; session.gc_divisor
; Default Value: 100
; Development Value: 1000
; Production Value: 1000

; session.hash_bits_per_character
; Default Value: 4
; Development Value: 5
; Production Value: 5

; short_open_tag
; Default Value: On
; Development Value: Off
; Production Value: Off

; track_errors
; Default Value: Off
; Development Value: On
; Production Value: Off

; url_rewriter.tags
; Default Value: "a=href,area=href,frame=src,form=,fieldset="
; Development Value:
"a=href,area=href,frame=src,input=src,form=fakeentry"
; Production Value:
"a=href,area=href,frame=src,input=src,form=fakeentry"

; variables_order
; Default Value: "EGPCS"
; Development Value: "GPCS"
; Production Value: "GPCS"

;;;;;;;;;;;;;;;;;;;;
; php.ini Options ;
;;;;;;;;;;;;;;;;;;;;
; Name for user-defined php.ini (.htaccess) files. Default is
".user.ini"
;user_ini.filename = ".user.ini"

; To disable this feature set this option to empty value
;user_ini.filename =

; TTL for user-defined php.ini files (time-to-live) in seconds.
Default is 300 seconds (5 minutes)
;user_ini.cache_ttl = 300

;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
; http://php.net/engine
engine = On

; This directive determines whether or not PHP will recognize code
between
; <? and ?> tags as PHP source which should be processed as such. It's
been
; recommended for several years that you not use the short tag "short
cut" and
; instead to use the full <?php and ?> tag combination. With the wide
spread use
; of XML and use of these tags by other languages, the server can
become easily
; confused and end up parsing the wrong code in the wrong context. But
because
; this short cut has been a feature for such a long time, it's
currently still
; supported for backwards compatibility, but we recommend you don't
use them.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/short-open-tag
short_open_tag = Off

; Allow ASP-style <% %> tags.
; http://php.net/asp-tags
asp_tags = Off

; The number of significant digits displayed in floating point
numbers.
; http://php.net/precision
precision = 14

; Enforce year 2000 compliance (will cause problems with non-compliant
browsers)
; http://php.net/y2k-compliance
y2k_compliance = On

; Output buffering is a mechanism for controlling how much output data
; (excluding headers and cookies) PHP should keep internally before
pushing that
; data to the client. If your application's output exceeds this
setting, PHP
; will send that data in chunks of roughly the size you specify.
; Turning on this setting and managing its maximum buffer size can
yield some
; interesting side-effects depending on your application and web
server.
; You may be able to send headers and cookies after you've already
sent output
; through print or echo. You also may see performance benefits if your
server is
; emitting less packets due to buffered output versus PHP streaming
the output
; as it gets it. On production servers, 4096 bytes is a good setting
for performance
; reasons.
; Note: Output buffering can also be controlled via Output Buffering
Control
; functions.
; Possible Values:
; On = Enabled and buffer is unlimited. (Use with caution)
; Off = Disabled
; Integer = Enables the buffer and sets its maximum size in bytes.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; http://php.net/output-buffering
output_buffering = Off

; You can redirect all of the output of your scripts to a function.
For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this
ini
; directive. Instead, explicitly set the output handler using
ob_start().
; Using this ini directive may cause problems unless you know what
script
; is doing.
; Note: You cannot use both "mb_output_handler" with
"ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and
"zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
; http://php.net/output-handler
;output_handler =

; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer
size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression.
PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
; http://php.net/zlib.output-compression
zlib.output_compression = Off

; http://php.net/zlib.output-compression-level
;zlib.output_compression_level = -1

; You cannot specify additional output handlers if
zlib.output_compression
; is activated here. This setting does the same as output_handler but
in
; a different order.
; http://php.net/zlib.output-handler
;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to
calling the
; PHP function flush() after each and every call to print() or echo()
and each
; and every HTML block. Turning this option on has serious
performance
; implications and is generally recommended for debugging purposes
only.
; http://php.net/implicit-flush
; Note: This directive is hardcoded to On for the CLI SAPI
implicit_flush = Off

; The unserialize callback function will be called (with the undefined
class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated. A warning appears if the specified
function is
; not defined, or if the function doesn't include/implement the
missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func =

; When floats & doubles are serialized store serialize_precision
significant
; digits after the floating point. The default value ensures that when
floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100

; This directive allows you to enable and disable warnings which PHP
will issue
; if you pass a value by reference at function call time. Passing
values by
; reference at function call time is a deprecated feature which will
be removed
; from PHP at some point in the near future. The acceptable method for
passing a
; value by reference to a function is by declaring the reference in
the functions
; definition, not at call time. This directive does not disable this
feature, it
; only determines whether PHP will warn you about it or not. These
warnings
; should enabled in development environments only.
; Default Value: On (Suppress warnings)
; Development Value: Off (Issue warnings)
; Production Value: Off (Issue warnings)
; http://php.net/allow-call-time-pass-reference
allow_call_time_pass_reference = On

; Safe Mode
; http://php.net/safe-mode
safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
; http://php.net/safe-mode-gid
safe_mode_gid = Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
; http://php.net/safe-mode-include-dir
safe_mode_include_dir =

; When safe_mode is on, only executables located in the
safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
; http://php.net/safe-mode-exec-dir
safe_mode_exec_dir =

; Setting certain environment variables may be a potential security
breach.
; This directive contains a comma-delimited list of prefixes. In Safe
Mode,
; the user may only alter environment variables whose names begin with
the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
; http://php.net/safe-mode-allowed-env-vars
safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environment
variables that
; the end user won't be able to change using putenv(). These
variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to
change them.
; http://php.net/safe-mode-protected-env-vars
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; open_basedir, if set, limits all file operations to the defined
directory
; and below. This directive makes most sense if used in a per-
directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/open-basedir
;open_basedir =

; This directive allows you to disable certain functions for security
reasons.
; It receives a comma-delimited list of function names. This directive
is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-functions
disable_functions =

; This directive allows you to disable certain classes for security
reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-classes
disable_classes =

; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <span style="color: ???????"> would work.
; http://php.net/syntax-highlighting
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000

; If enabled, the request will be allowed to complete even if the user
aborts
; the request. Consider enabling it if executing long requests, which
may end up
; being interrupted by the user or a browser timing out. PHP's default
behavior
; is to disable this feature.
; http://php.net/ignore-user-abort
;ignore_user_abort = On

; Determines the size of the realpath cache to be used by PHP. This
value should
; be increased on systems where PHP opens many files to reflect the
quantity of
; the file operations performed.
; http://php.net/realpath-cache-size
;realpath_cache_size = 16k

; Duration of time, in seconds for which to cache realpath information
for a given
; file or directory. For systems with rarely changing files, consider
increasing this
; value.
; http://php.net/realpath-cache-ttl
;realpath_cache_ttl = 120

;;;;;;;;;;;;;;;;;
; Miscellaneous ;
;;;;;;;;;;;;;;;;;

; Decides whether PHP may expose the fact that it is installed on the
server
; (e.g. by adding its signature to the Web server header). It is no
security
; threat in any way, but it makes it possible to determine whether you
use PHP
; on your server or not.
; http://php.net/expose-php
expose_php = On

;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

; Maximum execution time of each script, in seconds
; http://php.net/max-execution-time
; Note: This directive is hardcoded to 0 for the CLI SAPI
;max_execution_time = 120
max_execution_time = 240

; Maximum amount of time each script may spend parsing request data.
It's a good
; idea to limit this time on productions servers in order to eliminate
unexpectedly
; long running scripts.
; Note: This directive is hardcoded to -1 for the CLI SAPI
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)
; http://php.net/max-input-time
;max_input_time = 60
max_input_time = 90

; Maximum input variable nesting level
; http://php.net/max-input-nesting-level
;max_input_nesting_level = 64

; Maximum amount of memory a script may consume (128MB)
; http://php.net/memory-limit
;memory_limit = 128M
memory_limit = 256M

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; This directive informs PHP of which errors, warnings and notices you
would like
; it to take action for. The recommended way of setting values for
this
; directive is through the use of the error level constants and
bitwise
; operators. The error level constants are below here for convenience
as well as
; some common settings and their meanings.
; By default, PHP is set to take action on all errors, notices and
warnings EXCEPT
; those related to E_NOTICE and E_STRICT, which together cover best
practices and
; recommended coding standards in PHP. For performance reasons, this
is the
; recommend error reporting setting. Your production server shouldn't
be wasting
; resources complaining about best practices and coding standards.
That's what
; development servers and development settings are for.
; Note: The php.ini-development file has this setting as E_ALL |
E_STRICT. This
; means it pretty much reports everything which is exactly what you
want during
; development and early testing.
;
; Error Level Constants:
; E_ALL - All errors and warnings (includes E_STRICT as of
PHP 6.0.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often
result
; from a bug in your code, but it's possible that
it was
; intentional (e.g., using an uninitialized
variable and
; relying on the fact it's automatically
initialized to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest
changes
; to your code which will ensure the best
interoperability
; and forward compatibility of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial
startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during
PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
; E_DEPRECATED - warn about code that will not work in future
versions
; of PHP
; E_USER_DEPRECATED - user-generated deprecation warnings
;
; Common Values:
; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding
standards warnings.)
; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for
notices)
; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show
only errors)
; E_ALL | E_STRICT (Show all errors, warnings and notices including
coding standards.)
; Default Value: E_ALL & ~E_NOTICE
; Development Value: E_ALL | E_STRICT
; Production Value: E_ALL & ~E_DEPRECATED
; http://php.net/error-reporting
error_reporting = E_ALL & ~E_NOTICE & ~E_DEPRECATED

; This directive controls whether or not and where PHP will output
errors,
; notices and warnings too. Error output is very useful during
development, but
; it could be very dangerous in production environments. Depending on
the code
; which is triggering the error, sensitive information could
potentially leak
; out of your application such as database usernames and passwords or
worse.
; It's recommended that errors be logged on production servers rather
than
; having the errors sent to STDOUT.
; Possible Values:
; Off = Do not display any errors
; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
; On or stdout = Display errors to STDOUT
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/display-errors
display_errors = On

; The display of errors which occur during PHP's startup sequence are
handled
; separately from display_errors. PHP's default behavior is to
suppress those
; errors from clients. Turning the display of startup errors on can be
useful in
; debugging configuration problems. But, it's strongly recommended
that you
; leave this setting off on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://php.net/display-startup-errors
display_startup_errors = On

; Besides displaying errors, PHP can also log errors to locations such
as a
; server-specific log, STDERR, or a location specified by the
error_log
; directive found below. While errors should not be displayed on
productions
; servers they should still be monitored and logging is a great way to
do that.
; Default Value: Off
; Development Value: On
; Production Value: On
; http://php.net/log-errors
log_errors = Off

; Set maximum length of log_errors. In error_log information about the
source is
; added. The default is 1024 and 0 allows to not apply any maximum
length at all.
; http://php.net/log-errors-max-len
log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in same
file on same
; line unless ignore_repeated_source is set true.
; http://php.net/ignore-repeated-errors
ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this
setting
; is On you will not log errors with repeated messages from different
files or
; source lines.
; http://php.net/ignore-repeated-source
ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown
(on
; stdout or in the log). This has only effect in a debug compile, and
if
; error reporting includes E_WARNING in the allowed list
; http://php.net/report-memleaks
report_memleaks = On

; This setting is on by default.
;report_zend_debug = 0

; Store the last error/warning message in $php_errormsg (boolean).
Setting this value
; to On can assist in debugging and is appropriate for development
servers. It should
; however be disabled on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://php.net/track-errors
track_errors = Off

; Turn off normal error reporting and emit XML-RPC error XML
; http://php.net/xmlrpc-errors
;xmlrpc_errors = 0

; An XML-RPC faultCode
;xmlrpc_error_number = 0

; When PHP displays or logs an error, it has the capability of
inserting html
; links to documentation related to that error. This directive
controls whether
; those HTML links appear in error messages or not. For performance
and security
; reasons, it's recommended you disable this on production servers.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: On
; Development Value: On
; Production value: Off
; http://php.net/html-errors
html_errors = On

; If html_errors is set On PHP produces clickable error messages that
direct
; to a page describing the error or function causing the error in
detail.
; You can download a copy of the PHP manual from http://php.net/docs
; and change docref_root to the base URL of your local copy including
the
; leading '/'. You must also specify the file extension being used
including
; the dot. PHP's default behavior is to leave these settings empty.
; Note: Never use this feature for production boxes.
; http://php.net/docref-root
; Examples
;docref_root = "/phpmanual/"

; http://php.net/docref-ext
;docref_ext = .html

; String to output before an error message. PHP's default behavior is
to leave
; this setting blank.
; http://php.net/error-prepend-string
; Example:
;error_prepend_string = "<font color=#ff0000>"

; String to output after an error message. PHP's default behavior is
to leave
; this setting blank.
; http://php.net/error-append-string
; Example:
;error_append_string = "</font>"

; Log errors to specified file. PHP's default behavior is to leave
this value
; empty.
; http://php.net/error-log
; Example:
;error_log = php_errors.log
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog
error_log = "C:\xampp\apache\logs\php_error.log"

;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;

; Note - track_vars is ALWAYS enabled

; The separator used in PHP generated URLs to separate arguments.
; PHP's default setting is "&".
; http://php.net/arg-separator.output
; Example:
arg_separator.output = "&amp;"

; List of separator(s) used by PHP to parse input URLs into variables.
; PHP's default setting is "&".
; NOTE: Every character in this directive is considered as separator!
; http://php.net/arg-separator.input
; Example:
;arg_separator.input = ";&"

; This directive determines which super global arrays are registered
when PHP
; starts up. If the register_globals directive is enabled, it also
determines
; what order variables are populated into the global space. G,P,C,E &
S are
; abbreviations for the following respective super globals: GET, POST,
COOKIE,
; ENV and SERVER. There is a performance penalty paid for the
registration of
; these arrays and because ENV is not as commonly used as the others,
ENV is
; is not recommended on productions servers. You can still get access
to
; the environment variables through getenv() should you need to.
; Default Value: "EGPCS"
; Development Value: "GPCS"
; Production Value: "GPCS";
; http://php.net/variables-order
variables_order = "GPCS"

; This directive determines which super global data (G,P,C,E & S)
should
; be registered into the super global array REQUEST. If so, it also
determines
; the order in which that data is registered. The values for this
directive are
; specified in the same manner as the variables_order directive,
EXCEPT one.
; Leaving this value empty will cause PHP to use the value set in the
; variables_order directive. It does not mean it will leave the super
globals
; array REQUEST empty.
; Default Value: None
; Development Value: "GP"
; Production Value: "GP"
; http://php.net/request-order
;request_order = "GP"

; Whether or not to register the EGPCS variables as global variables.
You may
; want to turn this off if you don't want to clutter your scripts'
global scope
; with user data. This makes most sense when coupled with track_vars
- in which
; case you can access all of the GPC variables through the $HTTP_*_VARS
[],
; variables.
; You should do your best to write your scripts so that they do not
require
; register_globals to be on; Using form variables as globals can
easily lead
; to possible security problems, if the code is not very well thought
of.
; http://php.net/register-globals
register_globals = Off

; Determines whether the deprecated long $HTTP_*_VARS type predefined
variables
; are registered by PHP or not. As they are deprecated, we obviously
don't
; recommend you use them. They are on by default for compatibility
reasons but
; they are not recommended on production servers.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/register-long-arrays
register_long_arrays = Off

; This directive determines whether PHP registers $argv & $argc each
time it
; runs. $argv contains an array of all the arguments passed to PHP
when a script
; is invoked. $argc contains an integer representing the number of
arguments
; that were passed when the script was invoked. These arrays are
extremely
; useful when running scripts from the command line. When this
directive is
; enabled, registering these variables consumes CPU cycles and memory
each time
; a script is executed. For performance reasons, this feature should
be disabled
; on production servers.
; Note: This directive is hardcoded to On for the CLI SAPI
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/register-argc-argv
register_argc_argv = On

; When enabled, the SERVER and ENV variables are created when they're
first
; used (Just In Time) instead of when the script starts. If these
variables
; are not used within a script, having this directive on will result
in a
; performance gain. The PHP directives register_globals,
register_long_arrays,
; and register_argc_argv must be disabled for this directive to have
any affect.
; http://php.net/auto-globals-jit
auto_globals_jit = On

; Maximum size of POST data that PHP will accept.
; http://php.net/post-max-size
post_max_size = 128M

; Magic quotes are a preprocessing feature of PHP where PHP will
attempt to
; escape any character sequences in GET, POST, COOKIE and ENV data
which might
; otherwise corrupt data being placed in resources such as databases
before
; making that data available to you. Because of character encoding
issues and
; non-standard SQL implementations across many databases, it's not
currently
; possible for this feature to be 100% accurate. PHP's default
behavior is to
; enable the feature. We strongly recommend you use the escaping
mechanisms
; designed specifically for the database your using instead of relying
on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0
and is
; scheduled for removal in PHP 6.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/magic-quotes-gpc
magic_quotes_gpc = Off

; Magic quotes for runtime-generated data, e.g. data from SQL, from
exec(), etc.
; http://php.net/magic-quotes-runtime
magic_quotes_runtime = Off

; Use Sybase-style magic quotes (escape ' with '' instead of \').
; http://php.net/magic-quotes-sybase
magic_quotes_sybase = Off

; Automatically add files before PHP document.
; http://php.net/auto-prepend-file
auto_prepend_file =

; Automatically add files after PHP document.
; http://php.net/auto-append-file
auto_append_file =

; By default, PHP will output a character encoding using
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
;
; PHP's built-in default is text/html
; http://php.net/default-mimetype
default_mimetype = "text/html"

; PHP's default character set is set to empty.
; http://php.net/default-charset
;default_charset = "iso-8859-1"

; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default
behavior is
; to disable this feature.
; http://php.net/always-populate-raw-post-data
;always_populate_raw_post_data = On

;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
;
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"
;
; PHP's default setting for include_path is ".;/path/to/php/pear"
; http://php.net/include-path
include_path = ".;C:\xampp\php\PEAR"

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than
IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
; http://php.net/doc-root
doc_root =

; The directory under which PHP opens the script using /~username used
only
; if nonempty.
; http://php.net/user-dir
user_dir =

; Directory in which the loadable extensions (modules) reside.
; http://php.net/extension-dir
; extension_dir = "./"
; On windows:
; extension_dir = "ext"
extension_dir = "C:\xampp\php\ext"

; Whether or not to enable the dl() function. The dl() function does
NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is
automatically
; disabled on them.
; http://php.net/enable-dl
enable_dl = On

; cgi.force_redirect is necessary to provide security running PHP as a
CGI under
; most web servers. Left undefined, PHP turns this on by default.
You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; http://php.net/cgi.force-redirect
cgi.force_redirect = 0

; if cgi.nph is enabled it will force cgi to always sent Status: 200
with
; every request. PHP's default behavior is to disable this feature.
;cgi.nph = 1

; if cgi.force_redirect is turned on, and you are not running under
Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable
name that PHP
; will look for to know it is OK to continue execution. Setting this
variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; http://php.net/cgi.redirect-status-env
;cgi.redirect_status_env = ;

; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support
for CGI. PHP's
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME,
and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi
specs. Setting
; this to 1 will cause PHP CGI to fix its paths to conform to the
spec. A setting
; of zero causes PHP to behave as before. Default is 1. You should
fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
; http://php.net/cgi.fix-pathinfo
;cgi.fix_pathinfo=1

; FastCGI under IIS (on WINNT based OS) supports the ability to
impersonate
; security tokens of the calling client. This allows IIS to define
the
; security context that the request runs under. mod_fastcgi under
Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; http://php.net/fastcgi.impersonate
;fastcgi.impersonate = 1;

; Disable logging through FastCGI connection. PHP's default behavior
is to enable
; this feature.
;fastcgi.logging = 0

; cgi.rfc2616_headers configuration option tells PHP what type of
headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status:
header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
; http://php.net/cgi.rfc2616-headers
;cgi.rfc2616_headers = 0

;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
; http://php.net/file-uploads
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default
if not
; specified).
; http://php.net/upload-tmp-dir
upload_tmp_dir = "C:\xampp\tmp"

; Maximum allowed size for uploaded files.
; http://php.net/upload-max-filesize
upload_max_filesize = 128M

;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as
files.
; http://php.net/allow-url-fopen
allow_url_fopen = On

; Whether to allow include/require to open URLs (like http:// or ftp://)
as files.
; http://php.net/allow-url-include
allow_url_include = Off

; Define the anonymous ftp password (your email address). PHP's
default setting
; for this is empty.
; http://php.net/from
;from="jo...@doe.com"

; Define the User-Agent string. PHP's default setting for this is
empty.
; http://php.net/user-agent
;user_agent="PHP"

; Default timeout for socket based streams (seconds)
; http://php.net/default-socket-timeout
;default_socket_timeout = 60
default_socket_timeout = 120

; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; http://php.net/auto-detect-line-endings
;auto_detect_line_endings = Off

;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;

; If you wish to have an extension loaded automatically, use the
following
; syntax:
;
; extension=modulename.extension
;
; For example, on Windows:
;
; extension=msql.dll
;
; ... or under UNIX:
;
; extension=msql.so
;
; ... or with a path:
;
; extension=/path/to/extension/msql.so
;
; If you only provide the name of the extension, PHP will look for it
in its
; default extension directory.
;
; Windows Extensions
; Note that ODBC support is built in, so no dll is needed for it.
; Note that many DLL files are located in the extensions/ (PHP 4) ext/
(PHP 5)
; extension folders as well as the separate PECL DLL download (PHP 5).
; Be sure to appropriately set the extension_dir directive.

extension=php_bz2.dll
;extension=php_curl.dll
;extension=php_dba.dll
extension=php_mbstring.dll
extension=php_exif.dll
;extension=php_fileinfo.dll
extension=php_gd2.dll
extension=php_gettext.dll
;extension=php_gmp.dll
extension=php_imap.dll
;extension=php_interbase.dll
;extension=php_intl.dll
;extension=php_ldap.dll
extension=php_mcrypt.dll
;extension=php_mssql.dll
;extension=php_mysql_mysqlnd.dll
extension=php_mysql_libmysql.dll
;extension=php_mysqli_mysqlnd.dll
extension=php_mysqli_libmysql.dll
;extension=php_oci8.dll
extension=php_pdo.dll
;extension=php_pdo_firebird.dll
;extension=php_pdo_mssql.dll
;extension=php_pdo_mysql_mysqlnd.dll
extension=php_pdo_mysql_libmysql.dll
extension=php_pdo_odbc.dll
;extension=php_pdo_pgsql.dll
extension=php_pdo_sqlite.dll
;extension=php_pdo_sqlite_external.dll
;extension=php_pgsql.dll
;extension=php_pspell.dll
;extension=php_shmop.dll
;extension=php_snmp.dll
extension=php_soap.dll
extension=php_sockets.dll
extension=php_sqlite.dll
extension=php_sqlite3.dll
;extension=php_sybase_ct.dll
;extension=php_tidy.dll
extension=php_xmlrpc.dll
extension=php_zip.dll

[PECL]
;extension=php_dbase.dll
;extension=php_fbsql.dll
extension=php_mime_magic.dll
extension=php_ming.dll
;extension=php_msql.dll
extension=php_pdf.dll
;extension=php_pdo_oci.dll
;extension=php_pdo_oci8.dll

;zend_extension = "C:\xampp\php\ext\php_eaccelerator.dll"
;zend_extension = "C:\xampp\php\ext\php_xdebug.dll"


;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone
date.timezone = "Europe/Paris"

; http://php.net/date.default-latitude
;date.default_latitude = 31.7667

; http://php.net/date.default-longitude
;date.default_longitude = 35.2333

; http://php.net/date.sunrise-zenith
;date.sunrise_zenith = 90.583333

; http://php.net/date.sunset-zenith
;date.sunset_zenith = 90.583333

[filter]
; http://php.net/filter.default
;filter.default = unsafe_raw

; http://php.net/filter.default-flags
;filter.default_flags =

[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1

[intl]
;intl.default_locale =

[sqlite]
; http://php.net/sqlite.assoc-case
;sqlite.assoc_case = 0

[sqlite3]
;sqlite3.extension_dir =

[Pcre]
;PCRE library backtracking limit.
; http://php.net/pcre.backtrack-limit
;pcre.backtrack_limit=100000

;PCRE library recursion limit.
;Please note that if you set this value to a high number you may
consume all
;the available process stack and eventually crash PHP (due to reaching
the
;stack size limit imposed by the Operating System).
; http://php.net/pcre.recursion-limit
;pcre.recursion_limit=100000

[Pdo]
; Whether to pool ODBC connections. Can be one of "strict", "relaxed"
or "off"
; http://php.net/pdo-odbc.connection-pooling
;pdo_odbc.connection_pooling=strict

;pdo_odbc.db2_instance_name

[Pdo_mysql]
; If mysqlnd is used: Number of cache slots for the internal result
set cache
; http://php.net/pdo_mysql.cache_size
;pdo_mysql.cache_size = 2000
pdo_mysql.cache_size = 4000

; Default socket name for local MySQL connects. If empty, uses the
built-in
; MySQL defaults.
; http://php.net/pdo_mysql.default-socket
pdo_mysql.default_socket = "MySQL"

[Phar]
; http://php.net/phar.readonly
;phar.readonly = On

; http://php.net/phar.require-hash
;phar.require_hash = On

;phar.cache_list =

[Syslog]
; Whether or not to define the various syslog variables (e.g.
$LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise.
In
; runtime, you can define these variables by calling
define_syslog_variables().
; http://php.net/define-syslog-variables
define_syslog_variables = Off

[mail function]
; For Win32 only.
; http://php.net/smtp
SMTP = localhost
; http://php.net/smtp-port
smtp_port = 25

; For Win32 only.
; http://php.net/sendmail-from
;sendmail_from = postmaster@localhost

; For Unix only. You may supply arguments as well (default: "sendmail
-t -i").
; http://php.net/sendmail-path
;sendmail_path = "\"C:\xampp\sendmail\sendmail.exe\" -t"

; Force the addition of the specified parameters to be passed as extra
parameters
; to the sendmail binary. These parameters will always replace the
value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =

; Add X-PHP-Originating-Script: that will include uid of the script
followed by the filename
mail.add_x_header = Off

; Log all mail() calls including the full path of the script, line #,
to address and headers
;mail.log = "C:\xampp\apache\logs\php_mail.log"

[SQL]
; http://php.net/sql.safe-mode
sql.safe_mode = Off

[ODBC]
; http://php.net/odbc.default-db
;odbc.default_db = Not yet implemented

; http://php.net/odbc.default-user
;odbc.default_user = Not yet implemented

; http://php.net/odbc.default-pw
;odbc.default_pw = Not yet implemented

; Controls the ODBC cursor model.
; Default: SQL_CURSOR_STATIC (default).
;odbc.default_cursortype

; Allow or prevent persistent links.
; http://php.net/odbc.allow-persistent
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
; http://php.net/odbc.check-persistent
odbc.check_persistent = On

; Maximum number of persistent links. -1 means no limit.
; http://php.net/odbc.max-persistent
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no
limit.
; http://php.net/odbc.max-links
odbc.max_links = -1

; Handling of LONG fields. Returns number of bytes to variables. 0
means
; passthru.
; http://php.net/odbc.defaultlrl
odbc.defaultlrl = 4096

; Handling of binary data. 0 means passthru, 1 return as is, 2
convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an
explanation
; of odbc.defaultlrl and odbc.defaultbinmode
; http://php.net/odbc.defaultbinmode
odbc.defaultbinmode = 1

;birdstep.max_links = -1

[Interbase]
; Allow or prevent persistent links.
ibase.allow_persistent = 1

; Maximum number of persistent links. -1 means no limit.
ibase.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no
limit.
ibase.max_links = -1

; Default database name for ibase_connect().
;ibase.default_db =

; Default username for ibase_connect().
;ibase.default_user =

; Default password for ibase_connect().
;ibase.default_password =

; Default charset for ibase_connect().
;ibase.default_charset =

; Default timestamp format.
ibase.timestampformat = "%Y-%m-%d %H:%M:%S"

; Default date format.
ibase.dateformat = "%Y-%m-%d"

; Default time format.
ibase.timeformat = "%H:%M:%S"

[MySQL]
; Allow accessing, from PHP's perspective, local files with LOAD DATA
statements
; http://php.net/mysql.allow_local_infile
mysql.allow_local_infile = On

; Allow or prevent persistent links.
; http://php.net/mysql.allow-persistent
mysql.allow_persistent = On

; If mysqlnd is used: Number of cache slots for the internal result
set cache
; http://php.net/mysql.cache_size
;mysql.cache_size = 2000
mysql.cache_size = 4000

; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysql.max-persistent
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no
limit.
; http://php.net/mysql.max-links
mysql.max_links = -1

; Default port number for mysql_connect(). If unset, mysql_connect()
will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will
only look
; at MYSQL_PORT.
; http://php.net/mysql.default-port
mysql.default_port = 3306

; Default socket name for local MySQL connects. If empty, uses the
built-in
; MySQL defaults.
; http://php.net/mysql.default-socket
mysql.default_socket = "MySQL"

; Default host for mysql_connect() (doesn't apply in safe mode).
; http://php.net/mysql.default-host
mysql.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).
; http://php.net/mysql.default-user
mysql.default_user =

; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this
file.
; *Any* user with PHP access can run 'echo get_cfg_var
("mysql.default_password")
; and reveal this password! And of course, any users with read access
to this
; file will be able to reveal the password as well.
; http://php.net/mysql.default-password
mysql.default_password =

; Maximum time (in seconds) for connect timeout. -1 means no limit
; http://php.net/mysql.connect-timeout
;mysql.connect_timeout = 60
mysql.connect_timeout = -1

; Trace mode. When trace_mode is active (=On), warnings for table/
index scans and
; SQL-Errors will be displayed.
; http://php.net/mysql.trace-mode
;mysql.trace_mode = Off
mysql.trace_mode = Off

[MySQLi]

; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysqli.max-persistent
mysqli.max_persistent = -1

; Allow accessing, from PHP's perspective, local files with LOAD DATA
statements
; http://php.net/mysqli.allow_local_infile
mysqli.allow_local_infile = On

; Allow or prevent persistent links.
; http://php.net/mysqli.allow-persistent
mysqli.allow_persistent = On

; Maximum number of links. -1 means no limit.
; http://php.net/mysqli.max-links
mysqli.max_links = -1

; If mysqlnd is used: Number of cache slots for the internal result
set cache
; http://php.net/mysqli.cache_size
mysqli.cache_size = 2000

; Default port number for mysqli_connect(). If unset, mysqli_connect
() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will
only look
; at MYSQL_PORT.
; http://php.net/mysqli.default-port
mysqli.default_port = 3306

; Default socket name for local MySQL connects. If empty, uses the
built-in
; MySQL defaults.
; http://php.net/mysqli.default-socket
mysqli.default_socket = "MySQL"

; Default host for mysql_connect() (doesn't apply in safe mode).
; http://php.net/mysqli.default-host
mysqli.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).
; http://php.net/mysqli.default-user
mysqli.default_user =

; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this
file.
; *Any* user with PHP access can run 'echo get_cfg_var
("mysqli.default_pw")
; and reveal this password! And of course, any users with read access
to this
; file will be able to reveal the password as well.
; http://php.net/mysqli.default-pw
mysqli.default_pw =

; Allow or prevent reconnect
mysqli.reconnect = Off

[mysqlnd]
; Enable / Disable collection of general statstics by mysqlnd which
can be
; used to tune and monitor MySQL operations.
; http://php.net/mysqlnd.collect_statistics
mysqlnd.collect_statistics = On

; Enable / Disable collection of memory usage statstics by mysqlnd
which can be
; used to tune and monitor MySQL operations.
; http://php.net/mysqlnd.collect_memory_statistics
mysqlnd.collect_memory_statistics = Off

; Size of a pre-allocated buffer used when sending commands to MySQL
in bytes.
; http://php.net/mysqlnd.net_cmd_buffer_size
;mysqlnd.net_cmd_buffer_size = 2048

; Size of a pre-allocated buffer used for reading data sent by the
server in
; bytes.
; http://php.net/mysqlnd.net_read_buffer_size
;mysqlnd.net_read_buffer_size = 32768

[OCI8]

; Connection: Enables privileged connections using external
; credentials (OCI_SYSOPER, OCI_SYSDBA)
; http://php.net/oci8.privileged-connect
;oci8.privileged_connect = Off

; Connection: The maximum number of persistent OCI8 connections per
; process. Using -1 means no limit.
; http://php.net/oci8.max-persistent
;oci8.max_persistent = -1

; Connection: The maximum number of seconds a process is allowed to
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
; http://php.net/oci8.persistent-timeout
;oci8.persistent_timeout = -1

; Connection: The number of seconds that must pass before issuing a
; ping during oci_pconnect() to check the connection validity. When
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
; pings completely.
; http://php.net/oci8.ping-interval
;oci8.ping_interval = 60

; Connection: Set this to a user chosen connection class to be used
; for all pooled server requests with Oracle 11g Database Resident
; Connection Pooling (DRCP). To use DRCP, this value should be set to
; the same string for all web servers running the same application,
; the database pool must be configured, and the connection string must
; specify to use a pooled server.
;oci8.connection_class =

; High Availability: Using On lets PHP receive Fast Application
; Notification (FAN) events generated when a database node fails. The
; database must also be configured to post FAN events.
;oci8.events = Off

; Tuning: This option enables statement caching, and specifies how
; many statements to cache. Using 0 disables statement caching.
; http://php.net/oci8.statement-cache-size
;oci8.statement_cache_size = 20

; Tuning: Enables statement prefetching and sets the default number of
; rows that will be fetched automatically after statement execution.
; http://php.net/oci8.default-prefetch
;oci8.default_prefetch = 100

; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
; http://php.net/oci8.old-oci-close-semantics
;oci8.old_oci_close_semantics = Off

[PostgresSQL]
; Allow or prevent persistent links.
; http://php.net/pgsql.allow-persistent
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
; http://php.net/pgsql.auto-reset-persistent
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links. -1 means no limit.
; http://php.net/pgsql.max-persistent
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no
limit.
; http://php.net/pgsql.max-links
pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
; http://php.net/pgsql.ignore-notice
pgsql.ignore_notice = 0

; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
; http://php.net/pgsql.log-notice
pgsql.log_notice = 0

[Sybase-CT]
; Allow or prevent persistent links.
; http://php.net/sybct.allow-persistent
sybct.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
; http://php.net/sybct.max-persistent
sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no
limit.
; http://php.net/sybct.max-links
sybct.max_links = -1

; Minimum server message severity to display.
; http://php.net/sybct.min-server-severity
sybct.min_server_severity = 10

; Minimum client message severity to display.
; http://php.net/sybct.min-client-severity
sybct.min_client_severity = 10

; Set per-context timeout
; http://php.net/sybct.timeout
;sybct.timeout=

;sybct.packet_size

; The maximum time in seconds to wait for a connection attempt to
succeed before returning failure.
; Default: one minute
;sybct.login_timeout=

; The name of the host you claim to be connecting from, for display by
sp_who.
; Default: none
;sybct.hostname=

; Allows you to define how often deadlocks are to be retried. -1 means
"forever".
; Default: 0
;sybct.deadlock_retry_count=

[bcmath]
; Number of decimal digits for all bcmath functions.
; http://php.net/bcmath.scale
bcmath.scale = 0

[browscap]
; http://php.net/browscap
browscap = "C:\xampp\php\extras\browscap.ini"

[Session]
; Handler used to store/retrieve data.
; http://php.net/session.save-handler
session.save_handler = files

; Argument passed to save_handler. In the case of files, this is the
path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
;
; The path can be defined as:
;
; session.save_path = "N;/path"
;
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that
purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
; session.save_path = "N;MODE;/path"
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
; http://php.net/session.save-path
session.save_path = "C:\xampp\tmp"

; Whether to use cookies.
; http://php.net/session.use-cookies
session.use_cookies = 1

; http://php.net/session.cookie-secure
;session.cookie_secure =

; This option forces PHP to fetch and use a cookie for storing and
maintaining
; the session id. We encourage this operation as it's very helpful in
combatting
; session hijacking when not specifying and managing your own session
id. It is
; not the end all be all of session hijacking defense, but it's a good
start.
; http://php.net/session.use-only-cookies
session.use_only_cookies = 0

; Name of the session (used as cookie name).
; http://php.net/session.name
session.name = PHPSESSID

; Initialize session on request startup.
; http://php.net/session.auto-start
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
; http://php.net/session.cookie-lifetime
session.cookie_lifetime = 0

; The path for which the cookie is valid.
; http://php.net/session.cookie-path
session.cookie_path = /

; The domain for which the cookie is valid.
; http://php.net/session.cookie-domain
session.cookie_domain =

; Whether or not to add the httpOnly flag to the cookie, which makes
it inaccessible to browser scripting languages such as JavaScript.
; http://php.net/session.cookie-httponly
session.cookie_httponly =

; Handler used to serialize data. php is the standard serializer of
PHP.
; http://php.net/session.serialize-handler
session.serialize_handler = php

; Defines the probability that the 'garbage collection' process is
started
; on every session initialization. The probability is calculated by
using
; gc_probability/gc_divisor. Where session.gc_probability is the
numerator
; and gc_divisor is the denominator in the equation. Setting this
value to 1
; when the session.gc_divisor value is 100 will give you approximately
a 1% chance
; the gc will run on any give request.
; Default Value: 1
; Development Value: 1
; Production Value: 1
; http://php.net/session.gc-probability
session.gc_probability = 1

; Defines the probability that the 'garbage collection' process is
started on every
; session initialization. The probability is calculated by using the
following equation:
; gc_probability/gc_divisor. Where session.gc_probability is the
numerator and
; session.gc_divisor is the denominator in the equation. Setting this
value to 1
; when the session.gc_divisor value is 100 will give you approximately
a 1% chance
; the gc will run on any give request. Increasing this value to 1000
will give you
; a 0.1% chance the gc will run on any give request. For high volume
production servers,
; this is a more efficient approach.
; Default Value: 100
; Development Value: 1000
; Production Value: 1000
; http://php.net/session.gc-divisor
session.gc_divisor = 100

; After this number of seconds, stored data will be seen as 'garbage'
and
; cleaned up by the garbage collection process.
; http://php.net/session.gc-maxlifetime
session.gc_maxlifetime = 1440

; NOTE: If you are using the subdirectory option for storing session
files
; (see session.save_path above), then garbage collection does
*not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other
method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24
minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm

; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, even when
register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is
used.
; You can disable the feature and the warning separately. At this
time,
; the warning is only displayed, if bug_compat_42 is enabled. This
feature
; introduces some serious security problems if not handled correctly.
It's
; recommended that you do not use this feature on production servers.
But you
; should enable this on development servers and enable the warning as
well. If you
; do not enable the feature on development servers, you won't be
warned when it's
; used and debugging errors caused by this can be difficult to track
down.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/session.bug-compat-42
session.bug_compat_42 = On

; This setting controls whether or not you are warned by PHP when
initializing a
; session value into the global space. session.bug_compat_42 must be
enabled before
; these warnings can be issued by PHP. See the directive above for
more information.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/session.bug-compat-warn
session.bug_compat_warn = On

; Check HTTP Referer to invalidate externally stored URLs containing
ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
; http://php.net/session.referer-check
session.referer_check =

; How many bytes to read from the file.
; http://php.net/session.entropy-length
session.entropy_length = 0

; Specified here to create the session id.
; http://php.net/session.entropy-file
;session.entropy_file = /dev/urandom
session.entropy_file =

; http://php.net/session.entropy-length
;session.entropy_length = 16

; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
; http://php.net/session.cache-limiter
session.cache_limiter = nocache

; Document expires after n minutes.
; http://php.net/session.cache-expire
session.cache_expire = 180

; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publically accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://php.net/session.use-trans-sid
session.use_trans_sid = 0

; Select a hash function for use in generating session ids.
; Possible Values
; 0 (MD5 128 bits)
; 1 (SHA-1 160 bits)
; http://php.net/session.hash-function
session.hash_function = 0

; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; Possible values:
; 4 (4 bits: 0-9, a-f)
; 5 (5 bits: 0-9, a-v)
; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
; Default Value: 4
; Development Value: 5
; Production Value: 5
; http://php.net/session.hash-bits-per-character
session.hash_bits_per_character = 5

; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter
will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
; Default Value: "a=href,area=href,frame=src,form=,fieldset="
; Development Value:
"a=href,area=href,frame=src,input=src,form=fakeentry"
; Production Value:
"a=href,area=href,frame=src,input=src,form=fakeentry"
; http://php.net/url-rewriter.tags
url_rewriter.tags =
"a=href,area=href,frame=src,input=src,form=,fieldset="

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no
limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Connect timeout
;mssql.connect_timeout = 5

; Query timeout
;mssql.timeout = 60

; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096

; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096

; Limits the number of records in each batch. 0 = all records in one
batch.
;mssql.batchsize = 0

; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On

; Use NT authentication when connecting to the server
mssql.secure_connection = Off

; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1

; Specify client character set.
; If empty or not set the client charset from freetds.comf is used
; This is only used when compiled with FreeTDS
;mssql.charset = "ISO-8859-1"

[Assertion]
; Assert(expr); active by default.
; http://php.net/assert.active
;assert.active = On

; Issue a PHP warning for each failed assertion.
; http://php.net/assert.warning
;assert.warning = On

; Don't bail out by default.
; http://php.net/assert.bail
;assert.bail = Off

; User-function to be called if an assertion fails.
; http://php.net/assert.callback
;assert.callback = 0

; Eval the expression with current error_reporting(). Set to true if
you want
; error_reporting(0) around the eval().
; http://php.net/assert.quiet-eval
;assert.quiet_eval = 0

[COM]
; path to a file containing GUIDs, IIDs or filenames of files with
TypeLibs
; http://php.net/com.typelib-file
;com.typelib_file =

; allow Distributed-COM calls
; http://php.net/com.allow-dcom
;com.allow_dcom = true

; autoregister constants of a components typlib on com_load()
; http://php.net/com.autoregister-typelib
;com.autoregister_typelib = true

; register constants casesensitive
; http://php.net/com.autoregister-casesensitive
;com.autoregister_casesensitive = false

; show warnings on duplicate constant registrations
; http://php.net/com.autoregister-verbose
;com.autoregister_verbose = true

; The default character set code-page to use when passing strings to
and from COM objects.
; Default: system ANSI code page
;com.code_page=

[mbstring]
; language for internal character representation.
; http://php.net/mbstring.language
;mbstring.language = Japanese

; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
; http://php.net/mbstring.internal-encoding
;mbstring.internal_encoding = EUC-JP

; http input encoding.
; http://php.net/mbstring.http-input
;mbstring.http_input = auto

; http output encoding. mb_output_handler must be
; registered as output buffer to function
; http://php.net/mbstring.http-output
;mbstring.http_output = SJIS

; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
; http://php.net/mbstring.encoding-translation
;mbstring.encoding_translation = Off

; automatic encoding detection order.
; auto means
; http://php.net/mbstring.detect-order
;mbstring.detect_order = auto

; substitute_character used when character cannot be converted
; one from another
; http://php.net/mbstring.substitute-character
;mbstring.substitute_character = none;

; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
; http://php.net/mbstring.func-overload
;mbstring.func_overload = 0

; enable strict encoding detection.
;mbstring.strict_detection = Off

; This directive specifies the regex pattern of content types for
which mb_output_handler()
; is activated.
; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml
\+xml)
;mbstring.http_output_conv_mimetype=

; Allows to set script encoding. Only affects if PHP is compiled with
--enable-zend-multibyte
; Default: ""
;mbstring.script_encoding=

[gd]
; Tell the jpeg decode to ignore warnings and try to create
; a gd image. The warning will then be displayed as notices
; disabled by default
; http://php.net/gd.jpeg-ignore-warning
;gd.jpeg_ignore_warning = 0

[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as
JIS.
; With mbstring support this will automatically be converted into the
encoding
; given by corresponding encode setting. When empty
mbstring.internal_encoding
; is used. For the decode settings you can distinguish between
motorola and
; intel byte order. A decode setting cannot be empty.
; http://php.net/exif.encode-unicode
;exif.encode_unicode = ISO-8859-15

; http://php.net/exif.decode-unicode-motorola
;exif.decode_unicode_motorola = UCS-2BE

; http://php.net/exif.decode-unicode-intel
;exif.decode_unicode_intel = UCS-2LE

; http://php.net/exif.encode-jis
;exif.encode_jis =

; http://php.net/exif.decode-jis-motorola
;exif.decode_jis_motorola = JIS

; http://php.net/exif.decode-jis-intel
;exif.decode_jis_intel = JIS

[Tidy]
; The path to a default tidy configuration file to use when using tidy
; http://php.net/tidy.default-config
;tidy.default_config = "C:\xampp\php\extras\default.tcfg"

; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html
content
; such as dynamic images
; http://php.net/tidy.clean-output
tidy.clean_output = Off

[soap]
; Enables or disables WSDL caching feature.
; http://php.net/soap.wsdl-cache-enabled
soap.wsdl_cache_enabled=1

; Sets the directory name where SOAP extension will put cache files.
; http://php.net/soap.wsdl-cache-dir
soap.wsdl_cache_dir="/tmp"

; (time to live) Sets the number of second while cached file will be
used
; instead of original one.
; http://php.net/soap.wsdl-cache-ttl
soap.wsdl_cache_ttl=86400

; Sets the size of the cache limit. (Max. number of WSDL files to
cache)
soap.wsdl_cache_limit = 5

[sysvshm]
; A default size of the shared memory segment
;sysvshm.init_mem = 10000

[ldap]
; Sets the maximum number of open links or -1 for unlimited.
ldap.max_links = -1

[mcrypt]
; For more information about mcrypt settings see http://php.net/mcrypt-module-open

; Directory where to load mcrypt algorithms
; Default: Compiled in into libmcrypt (usually /usr/local/lib/
libmcrypt)
;mcrypt.algorithms_dir=

; Directory where to load mcrypt modes
; Default: Compiled in into libmcrypt (usually /usr/local/lib/
libmcrypt)
;mcrypt.modes_dir=

[dba]
;dba.default_handler=

[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.show_timestamp_decimals = Off
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128

[mime_magic]
mime_magic.magicfile = "C:\xampp\php\extras\magic.mime"
;mime_magic.debug = On

[eAccelerator]
; The amount of shared memory (in megabytes) that eAccelerator will
use.
; "0" means OS default. Default value is "0".
eaccelerator.shm_size = "0"

; The directory that is used for disk cache. eAccelerator stores
precompiled
; code, session data, content and user entries here. The same data
can be
; stored in shared memory also (for more quick access). Default value
is
; "/tmp/eaccelerator".
eaccelerator.cache_dir = "C:\xampp\tmp"

; Enables or disables eAccelerator. Should be "1" for enabling or
; "0" for disabling. Default value is "1".
eaccelerator.enable = "1"

; Enables or disables debug logging. Setting this to 1 will print
information
; to the log file about the cach hits of a file.
eaccelerator.debug = 0

; Set the log file for eaccelerator. When this option isn't set then
the data
; will be logged to stderr
;eaccelerator.log_file = "C:\xampp\apache\logs\eaccelerator.log"

; Enables or disables PHP file modification checking. Should be "1"
; for enabling or "0" for disabling. You should set it to "1" if you
want
; to recompile PHP files after modification. Default value is "1".
eaccelerator.check_mtime = "1"

; Determine which PHP files must be cached. You may specify the number
of
; patterns (for example "*.php *.phtml") which specifies to cache or
; not to cache. If pattern starts with the character "!", it means to
ignore
; files which are matched by the following pattern. Default value is
"" that
; means - all PHP scripts will be cached.
eaccelerator.filter = ""

; Disables putting large values into shared memory by "eaccelerator_put
()"
; function.
; It indicates the largest allowed size in bytes (10240, 10K, 1M). The
"0"
; disables the limit. Default value is "0".
eaccelerator.shm_max = "0"

; When eAccelerator fails to get shared memory for new script it
removes
; all scripts which were not accessed at last "shm_ttl" seconds from
shared
; memory. Default value is "0" that means - don't remove any files
from
; shared memory.
eaccelerator.shm_ttl = "0"

; When eAccelerator fails to get shared memory for new script it tryes
to
; remove old script if the previous try was made more then
"shm_prune_period"
; seconds ago. Default value is "0" that means - don't try to remove
any
; files from shared memory.
eaccelerator.shm_prune_period = "0"

; Enables or disables caching of compiled scripts on disk. It has no
effect
; on session data and content caching.
; Default value is "0" that means - use disk and shared memory for
caching.
eaccelerator.shm_only = "0"

[XDebug]
; xdebug.auto_trace
; Type: boolean, Default value: 0
; When this setting is set to on, the tracing of function calls will
be enabled just before the
; script is run. This makes it possible to trace code in the
auto_prepend_file.
;xdebug.auto_trace = 0

; xdebug.collect_includes
; Type: boolean, Default value: 1
; This setting, defaulting to On, controls whether Xdebug should write
the filename used in include
; (), include_once(), require() or require_once() to the trace files.
;xdebug.collect_includes = 1

; xdebug.collect_params
; Type: integer, Default value: 0
;
; This setting, defaulting to 0, controls whether Xdebug should
collect the parameters passed to
; functions when a function call is recorded in either the function
trace or the stack trace.
;xdebug.collect_params = 0

; xdebug.collect_return
; Type: boolean, Default value: 0
; This setting, defaulting to Off, controls whether Xdebug should
write the return value of function
; calls to the trace files.
;xdebug.collect_return = 0

; xdebug.collect_vars
; Type: boolean, Default value: Off
; This setting tells Xdebug to gather information about which
variables are used in a certain scope.
; This analysis can be quite slow as Xdebug has to reverse engineer
PHP's opcode arrays. This setting
; will not record which values the different variables have, for that
use xdebug.collect_params. This
; setting needs to be enabled only if you wish to use
xdebug_get_declared_vars().
;xdebug.collect_vars = "Off"

; xdebug.default_enable
; Type: boolean, Default value: On
; If this setting is On then stacktraces will be shown by default on
an error event. You can disable
; showing stacktraces from your code with xdebug_disable(). As this is
one of the basic functions of
; Xdebug, it is advisable to leave this setting set to 'On'.
;xdebug.default_enable = "On"

; xdebug.dump.*
; Type: string, Default value: Empty
; * = COOKIE, FILES, GET, POST, REQUEST, SERVER, SESSION. These seven
settings control which data
; from the superglobals is shown when an error situation occurs. Each
php.ini setting can consist of
; a comma seperated list of variables from this superglobal to dump,
but make sure you do not add
; spaces in this setting. In order to dump the REMOTE_ADDR and the
REQUEST_METHOD when an error
; occurs, add this setting:
;
; xdebug.dump.SERVER = REMOTE_ADDR,REQUEST_METHOD
; xdebug.dump.SERVER = REMOTE_ADDR,REQUEST_METHOD
;xdebug.dump.COOKIE = ""
;xdebug.dump.FILES = ""
;xdebug.dump.GET = ""
;xdebug.dump.POST = ""
;xdebug.dump.REQUEST = ""
;xdebug.dump.SERVER = ""
;xdebug.dump.SESSION = ""

; xdebug.dump_globals
; Type: boolean, Default value: 1
; Controls whether the values of the superglobals as defined by the
xdebug.dump.* settings whould be
; shown or not.
;xdebug.dump_globals = 1

; xdebug.dump_once
; Type: boolean, Default value: 1
; Controls whether the values of the superglobals should be dumped on
all error situations (set to
; Off) or only on the first (set to On).
;xdebug.dump_once = 1

; xdebug.dump_undefined
; Type: boolean, Default value: 0
; If you want to dump undefined values from the superglobals you
should set this setting to On,
; otherwise leave it set to Off.
;xdebug.dump_undefined = 0

; xdebug.extended_info
; Type: integer, Default value: 1
; Controls whether Xdebug should enforce 'extended_info' mode for the
PHP parser; this allows Xdebug
; to do file/line breakpoints with the remote debugger. When tracing
or profiling scripts you
; generally want to turn off this option as PHP's generated oparrays
will increase with about a third
; of the size slowing down your scripts. This setting can not be set
in your scripts with ini_set(),
; but only in php.ini.
;xdebug.extended_info = 1

; xdebug.file_link_format
; Type: string, Default value: *empty string* , Introduced in Xdebug
2.1
;
; This setting determines the format of the links that are made in the
display of stack traces where
; file names are used. This allows IDEs to set up a link-protocol that
makes it possible to go
; directly to a line and file by clicking on the filenames that Xdebug
shows in stack traces.
;xdebug.file_link_format = ""

; xdebug.idekey
; Type: string, Default value: *complex*
; Controls which IDE Key Xdebug should pass on to the DBGp debugger
handler. The default is based on
; environment settings. First the environment setting DBGP_IDEKEY is
consulted, then USER and as last
; USERNAME. The default is set to the first environment variable that
is found. If none could be
; found the setting has as default ''.
;xdebug.idekey = ""

; xdebug.manual_url
; Type: string, Default value: http://www.php.net
; This is the base url for the links from the function traces and
error message to the manual pages
; of the function from the message. It is advisable to set this
setting to use the closest mirror.
;xdebug.manual_url = "http://www.php.net"

; xdebug.max_nesting_level
; Type: integer, Default value: 100
; Controls the protection mechanism for infinite recursion protection.
The value of this setting is
; the maximum level of nested functions that are allowed before the
script will be aborted.
;xdebug.max_nesting_level = 100

; xdebug.overload_var_dump
; Type: boolean, Default value: 1 , Introduced in Xdebug 2.1
; By default Xdebug overloads var_dump() with its own improved version
for displaying variables when
; the html_errors php.ini setting is set to 1. In case you do not want
that, you can set this setting
; to 0, but check first if it's not smarter to turn off html_errors.
;xdebug.overload_var_dump = 1

; xdebug.profiler_append
; Type: integer, Default value: 0
; When this setting is set to 1, profiler files will not be
overwritten when a new request would map
; to the same file (depnding on the xdebug.profiler_output_name
setting. Instead the file will be
; appended to with the new profile.
xdebug.profiler_append = 0

; xdebug.profiler_enable
; Type: integer, Default value: 0
; Enables Xdebug's profiler which creates files in the profile output
directory. Those files can be
; read by KCacheGrind to visualize your data. This setting can not be
set in your script with ini_set
; ().
xdebug.profiler_enable = 0

; xdebug.profiler_enable_trigger
; Type: integer, Default value: 0
; When this setting is set to 1, you can trigger the generation of
profiler files by using the
; XDEBUG_PROFILE GET/POST parameter. This will then write the profiler
data to defined directory.
xdebug.profiler_enable_trigger = 0

; xdebug.profiler_output_dir
; Type: string, Default value: /tmp
; The directory where the profiler output will be written to, make
sure that the user who the PHP
; will be running as has write permissions to that directory. This
setting can not be set in your
; script with ini_set().
xdebug.profiler_output_dir = "C:\xampp\tmp"

; xdebug.profiler_output_name
; Type: string, Default value: cachegrind.out.%p
;
; This setting determines the name of the file that is used to dump
traces into. The setting
; specifies the format with format specifiers, very similar to sprintf
() and strftime(). There are
; several format specifiers that can be used to format the file name.
;
; See the xdebug.trace_output_name documentation for the supported
specifiers.
xdebug.profiler_output_name = "xdebug_profile.%R::%u"

; xdebug.remote_autostart
; Type: boolean, Default value: 0
; Normally you need to use a specific HTTP GET/POST variable to start
remote debugging (see Remote
; Debugging). When this setting is set to 'On' Xdebug will always
attempt to start a remote debugging
; session and try to connect to a client, even if the GET/POST/COOKIE
variable was not present.
;xdebug.remote_autostart = 0

; xdebug.remote_enable
; Type: boolean, Default value: 0
; This switch controls whether Xdebug should try to contact a debug
client which is listening on the
; host and port as set with the settings xdebug.remote_host and
xdebug.remote_port. If a connection
; can not be established the script will just continue as if this
setting was Off.
;xdebug.remote_enable = 0

; xdebug.remote_handler
; Type: string, Default value: dbgp
; Can be either 'php3' which selects the old PHP 3 style debugger
output, 'gdb' which enables the GDB
; like debugger interface or 'dbgp' - the brand new debugger protocol.
The DBGp protocol is more
; widely supported by clients. See more information in the
introduction for Remote Debugging.
;xdebug.remote_handler = "dbgp"

; xdebug.remote_host
; Type: string, Default value: localhost
; Selects the host where the debug client is running, you can either
use a host name or an IP
; address.
;xdebug.remote_host = "localhost"

; xdebug.remote_log
; Type: string, Default value: none
; If set to a value, it is used as filename to a file to which all
remote debugger communications are
; logged. The file is always opened in append-mode, and will therefore
not be overwritten by default.
; There is no concurrency protection available.
;xdebug.remote_log = "none"

; xdebug.remote_mode
; Type: string, Default value: req
;
; Selects when a debug connection is initiated. This setting can have
two different values:
;
; req
; Xdebug will try to connect to the debug client as soon as the
script starts.
; jit
; Xdebug will only try to connect to the debug client as soon as
an error condition occurs.
;xdebug.remote_mode = "req"

; xdebug.remote_port
; Type: integer, Default value: 9000
; The port to which Xdebug tries to connect on the remote host. Port
9000 is the default for both the
; client and the bundled debugclient. As many clients use this port
number, it is best to leave this
; setting unchanged.
;xdebug.remote_port = 9000

; xdebug.show_exception_trace
; Type: integer, Default value: 0
; When this setting is set to 1, Xdebug will show a stack trace
whenever an exception is raised -
; even if this exception is actually caught.
;xdebug.show_exception_trace = 0

; xdebug.show_local_vars
; Type: integer, Default value: 0
; When this setting is set to something != 0 Xdebug's generated stack
dumps in error situations will
; also show all variables in the top-most scope. Beware that this
might generate a lot of
; information, and is therefore turned off by default.
;xdebug.show_local_vars = 0

; xdebug.show_mem_delta
; Type: integer, Default value: 0
; When this setting is set to something != 0 Xdebug's human-readable
generated trace files will show
; the difference in memory usage between function calls. If Xdebug is
configured to generate
; computer-readable trace files then they will always show this
information.
;xdebug.show_mem_delta = 0

; xdebug.trace_format
; Type: integer, Default value: 0
; The format of the trace file.
;
; See the introduction of Function Traces for a few examples.
;xdebug.trace_format = 0

; xdebug.trace_options
; Type: integer, Default value: 0
; When set to '1' the trace files will be appended to, instead of
being overwritten in subsequent
; requests.
;xdebug.trace_options = 0

; xdebug.trace_output_dir
; Type: string, Default value: /tmp
; The directory where the tracing files will be written to, make sure
that the user who the PHP will
; be running as has write permissions to that directory.
; xdebug.trace_output_name
xdebug.trace_output_dir = "C:\xampp\tmp"

; Type: string, Default value: trace.%c
;
; This setting determines the name of the file that is used to dump
traces into. The setting
; specifies the format with format specifiers, very similar to sprintf
() and strftime(). There are
; several format specifiers that can be used to format the file name.
The '.xt' extension is always
; added automatically.
;xdebug.trace_output_name = "trace.%c"

; xdebug.var_display_max_children
; Type: integer, Default value: 128
; Controls the amount of array children and object's properties are
shown when variables are
; displayed with either xdebug_var_dump(), xdebug.show_local_vars or
through Function Traces. This
; setting does not have any influence on the number of children that
is send to the client through
; the Remote Debugging feature.
;xdebug.var_display_max_children = 128

; xdebug.var_display_max_data
; Type: integer, Default value: 512
; Controls the maximum string length that is shown when variables are
displayed with either
; xdebug_var_dump(), xdebug.show_local_vars or through Function
Traces. This setting does not have
; any influence on the amount of data that is send to the client
through the Remote Debugging
; feature.
;xdebug.var_display_max_data = 512

; xdebug.var_display_max_depth
; Type: integer, Default value: 3
; Controls how many nested levels of array elements and object
properties are when variables are
; displayed with either xdebug_var_dump(), xdebug.show_local_vars or
through Function Traces. This
; setting does not have any influence on the depth of children that is
send to the client through the
; Remote Debugging feature.
;xdebug.var_display_max_depth = 3

; Local Variables:
; tab-width: 4
; End:


Finally, do I only need ton change the install url to run qubit
install ? (because I only downloaded icaatom-1.0.7.tar and not qubit
as I do not need development environment).

Thanks again.

Regards,

Philippe.

[ptrem]

Oops, sorry, here my my.ini file ... :



# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL
plays
# an important part, or systems up to 128M where MySQL is used
together with
# other programs (such as a web server)
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is @localstatedir@) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the
program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
#user = your_username
#password = your_password
host = .
port = 3306
socket = "MySQL"

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
basedir = "C:/xampp/mysql/"
datadir = "C:/xampp/mysql/data/"
port = 3306
socket = "MySQL"
skip-locking
key_buffer = 16M
max_allowed_packet = 1M
table_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M

default-time-zone = "Europe/Paris"

log_error = "C:/xampp/mysql/data/mysql.err"
pid_file = "mysql.pid"
general_log = 0
general_log_file = "C:/xampp/mysql/data/mysql.log"
slow_query_log = 0
slow_query_log_file = "C:/xampp/mysql/data/mysql-slow.log"

# Don't listen on a TCP/IP port at all. This can be a security
enhancement,
# if all processes that need to connect to mysqld run on the same
host.
# All interaction with mysqld must be made via Unix sockets or named
pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking
enable-named-pipe

# Disable Federated by default
skip-federated

# Replication Master Server (default)
# binary logging is required for replication
#log-bin = mysql-bin

# binary logging format - mixed recommended
#binlog_format = mixed

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose
between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual)
-
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings
and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method,
then
# start replication for the first time (even unsuccessfully, for
example
# if you mistyped the password in master-password and the slave
fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be
ignored and
# overridden by the content of the master.info file, unless you
shutdown
# the slave server, delete master.info and restart the slaver
server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin = mysql-bin

# Point the following paths to different dedicated disks
tmpdir = "C:/xampp/tmp/"
#log-update = "C:/xampp/tmp/mysql"

# Uncomment the following if you are using InnoDB tables
#skip-innodb
innodb_data_home_dir = "C:/xampp/mysql/data/"
innodb_data_file_path = ibdata1:10M:autoextend
innodb_log_group_home_dir = "C:/xampp/mysql/data/"
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 16M
innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
innodb_log_file_size = 5M
innodb_log_buffer_size = 8M
innodb_flush_log_at_trx_commit = 1
innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

[Andreas Nef]

Hi Philippe

Ok, what are the access_log entries after the configureDatabase call
(loadData? with what return values?). You have the qubit_dev.php even
in your normal release, just replace the "install.php" part of the url
with it.
Please, can you send the "my.ini" (mysql database config file) rather
than the php.ini?

Andreas

> Philippe.pe.
> >

[ptrem]

Andreas,

I re-executed completely the installation. Here is the full access_log
file :

127.0.0.1 - - [18/Sep/2009:14:36:02 +0200] "GET /icaatom/ HTTP/1.1"
302 108 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14)
Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:36:04 +0200] "GET /icaatom/install.php/
sfInstallPlugin HTTP/1.1" 302 135 "-" "Mozilla/5.0 (Windows; U;
Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET
CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:36:04 +0200] "GET /icaatom/install.php/
sfInstallPlugin/checkSystem HTTP/1.1" 200 4326 "-" "Mozilla/5.0

(Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/
3.0.14 (.NET CLR 3.5.30729)"

127.0.0.1 - - [18/Sep/2009:14:36:11 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/misc/drupal.js HTTP/1.1" 200 10843
"http://localhost/icaatom/install.php/sfInstallPlugin/checkSystem"

"Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/

2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:36:11 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/misc/progress.js HTTP/1.1" 200 3050
"http://localhost/icaatom/install.php/sfInstallPlugin/checkSystem"

"Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/

2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:36:11 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/modules/system/defaults.css HTTP/1.1" 200
757 "http://localhost/icaatom/install.php/sfInstallPlugin/checkSystem"

"Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/

2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:36:11 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/minnelli/minnelli.css HTTP/
1.1" 200 266 "http://localhost/icaatom/install.php/sfInstallPlugin/
checkSystem" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:
1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:36:11 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/modules/system/system.css HTTP/1.1" 200
10382 "http://localhost/icaatom/install.php/sfInstallPlugin/
checkSystem" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:
1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:36:11 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/print.css HTTP/1.1" 200
1100 "http://localhost/icaatom/install.php/sfInstallPlugin/
checkSystem" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:
1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:36:11 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/style.css HTTP/1.1" 200
18644 "http://localhost/icaatom/install.php/sfInstallPlugin/
checkSystem" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:
1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:36:11 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/images/task-list.png HTTP/
1.1" 200 128 "http://localhost/icaatom/sfDrupalPlugin/vendor/drupal/
themes/garland/style.css" "Mozilla/5.0 (Windows; U; Windows NT 5.1;
fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:36:11 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/misc/progress.gif HTTP/1.1" 200 790
"http://localhost/icaatom/sfDrupalPlugin/vendor/drupal/modules/system/
system.css" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14)
Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:36:11 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/images/menu-leaf.gif HTTP/
1.1" 200 175 "http://localhost/icaatom/sfDrupalPlugin/vendor/drupal/
themes/garland/style.css" "Mozilla/5.0 (Windows; U; Windows NT 5.1;
fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:36:12 +0200] "GET /icaatom/install.php/
sfInstallPlugin/callback HTTP/1.1" 500 1200 "-" "-"
127.0.0.1 - - [18/Sep/2009:14:36:12 +0200] "GET /icaatom/install.php/
sfInstallPlugin/callback HTTP/1.1" 200 29 "-" "-"
127.0.0.1 - - [18/Sep/2009:14:36:17 +0200] "GET /icaatom/install.php/
sfInstallPlugin/callback HTTP/1.1" 200 29 "-" "-"
127.0.0.1 - - [18/Sep/2009:14:36:11 +0200] "GET /icaatom/install.php/
sfInstallPlugin/checkHtaccess HTTP/1.1" 200 1 "http://localhost/
icaatom/install.php/sfInstallPlugin/checkSystem" "Mozilla/5.0

(Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/
3.0.14 (.NET CLR 3.5.30729)"

127.0.0.1 - - [18/Sep/2009:14:36:24 +0200] "GET /icaatom/install.php/
sfInstallPlugin/checkSearchIndex HTTP/1.1" 200 - "http://localhost/
icaatom/install.php/sfInstallPlugin/checkSystem" "Mozilla/5.0

(Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/
3.0.14 (.NET CLR 3.5.30729)"

127.0.0.1 - - [18/Sep/2009:14:37:14 +0200] "GET /icaatom/install.php/
sfInstallPlugin/configureDatabase HTTP/1.1" 200 5434 "http://localhost/
icaatom/install.php/sfInstallPlugin/checkSystem" "Mozilla/5.0

(Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/
3.0.14 (.NET CLR 3.5.30729)"

127.0.0.1 - - [18/Sep/2009:14:37:15 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/misc/drupal.js HTTP/1.1" 304 - "http://

localhost/icaatom/install.php/sfInstallPlugin/configureDatabase"
"Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/

2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:37:15 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/misc/collapse.js HTTP/1.1" 200 2748

"http://localhost/icaatom/install.php/sfInstallPlugin/
configureDatabase" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:

1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:37:15 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/style.css HTTP/1.1" 304 -

"http://localhost/icaatom/install.php/sfInstallPlugin/
configureDatabase" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:

1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:37:15 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/modules/system/defaults.css HTTP/1.1" 304
- "http://localhost/icaatom/install.php/sfInstallPlugin/

configureDatabase" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:

1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:37:15 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/modules/system/system.css HTTP/1.1" 304 -

"http://localhost/icaatom/install.php/sfInstallPlugin/
configureDatabase" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:

1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:37:15 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/print.css HTTP/1.1" 304 -

"http://localhost/icaatom/install.php/sfInstallPlugin/
configureDatabase" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:

1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:37:15 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/minnelli/minnelli.css HTTP/
1.1" 304 - "http://localhost/icaatom/install.php/sfInstallPlugin/

configureDatabase" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:

1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:37:15 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/misc/watchdog-ok.png HTTP/1.1" 200 3217
"http://localhost/icaatom/sfDrupalPlugin/vendor/drupal/themes/garland/
style.css" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14)
Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:37:15 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/images/task-list.png HTTP/
1.1" 304 - "http://localhost/icaatom/sfDrupalPlugin/vendor/drupal/
themes/garland/style.css" "Mozilla/5.0 (Windows; U; Windows NT 5.1;
fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:37:15 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/images/gradient-inner.png
HTTP/1.1" 200 189 "http://localhost/icaatom/sfDrupalPlugin/vendor/
drupal/themes/garland/style.css" "Mozilla/5.0 (Windows; U; Windows NT
5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR
3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:37:15 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/images/menu-collapsed.gif
HTTP/1.1" 200 176 "http://localhost/icaatom/sfDrupalPlugin/vendor/
drupal/themes/garland/style.css" "Mozilla/5.0 (Windows; U; Windows NT
5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR
3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:37:32 +0200] "POST /icaatom/install.php/

sfInstallPlugin/configureDatabase HTTP/1.1" 302 132 "http://localhost/
icaatom/install.php/sfInstallPlugin/configureDatabase" "Mozilla/5.0
(Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/
3.0.14 (.NET CLR 3.5.30729)"

The my.ini file is in my prior post (I saw my mistake sending you the
php.ini and so I sent you the my.ini, immediately after sorry).

When I run "http://localhost/icaatom/qubit_dev.php", I have exactly
the same problem.

Here is the corresponding access log (ending with a 302 error) :

127.0.0.1 - - [18/Sep/2009:14:42:17 +0200] "GET /icaatom/qubit_dev.php
HTTP/1.1" 200 39597 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr;
rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:47:13 +0200] "GET /icaatom/web/
qubit_dev.php HTTP/1.1" 404 1253 "-" "Mozilla/5.0 (Windows; U; Windows
NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR
3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:47:23 +0200] "GET /icaatom/qubit_dev.php
HTTP/1.1" 302 1309 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr;
rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:47:24 +0200] "GET /icaatom/install.php/
sfInstallPlugin HTTP/1.1" 302 135 "-" "Mozilla/5.0 (Windows; U;
Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET
CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:47:26 +0200] "GET /icaatom/install.php/
sfInstallPlugin/checkSystem HTTP/1.1" 200 4326 "-" "Mozilla/5.0

(Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/
3.0.14 (.NET CLR 3.5.30729)"

127.0.0.1 - - [18/Sep/2009:14:47:32 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/misc/drupal.js HTTP/1.1" 200 10843
"http://localhost/icaatom/install.php/sfInstallPlugin/checkSystem"

"Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/

2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:47:32 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/misc/progress.js HTTP/1.1" 200 3050
"http://localhost/icaatom/install.php/sfInstallPlugin/checkSystem"

"Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/

2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:47:32 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/modules/system/defaults.css HTTP/1.1" 200
757 "http://localhost/icaatom/install.php/sfInstallPlugin/checkSystem"

"Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/

2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:47:32 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/print.css HTTP/1.1" 200
1100 "http://localhost/icaatom/install.php/sfInstallPlugin/
checkSystem" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:
1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:47:32 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/minnelli/minnelli.css HTTP/
1.1" 200 266 "http://localhost/icaatom/install.php/sfInstallPlugin/
checkSystem" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:
1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:47:32 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/style.css HTTP/1.1" 200
18644 "http://localhost/icaatom/install.php/sfInstallPlugin/
checkSystem" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:
1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:47:32 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/modules/system/system.css HTTP/1.1" 200
10382 "http://localhost/icaatom/install.php/sfInstallPlugin/
checkSystem" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:
1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:47:32 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/images/task-list.png HTTP/
1.1" 200 128 "http://localhost/icaatom/sfDrupalPlugin/vendor/drupal/
themes/garland/style.css" "Mozilla/5.0 (Windows; U; Windows NT 5.1;
fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:47:32 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/misc/progress.gif HTTP/1.1" 200 790
"http://localhost/icaatom/sfDrupalPlugin/vendor/drupal/modules/system/
system.css" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14)
Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:47:32 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/images/menu-leaf.gif HTTP/
1.1" 200 175 "http://localhost/icaatom/sfDrupalPlugin/vendor/drupal/
themes/garland/style.css" "Mozilla/5.0 (Windows; U; Windows NT 5.1;
fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:47:33 +0200] "GET /icaatom/install.php/
sfInstallPlugin/callback HTTP/1.1" 500 1200 "-" "-"
127.0.0.1 - - [18/Sep/2009:14:47:33 +0200] "GET /icaatom/install.php/
sfInstallPlugin/callback HTTP/1.1" 200 29 "-" "-"
127.0.0.1 - - [18/Sep/2009:14:47:38 +0200] "GET /icaatom/install.php/
sfInstallPlugin/callback HTTP/1.1" 200 29 "-" "-"
127.0.0.1 - - [18/Sep/2009:14:47:32 +0200] "GET /icaatom/install.php/
sfInstallPlugin/checkHtaccess HTTP/1.1" 200 1 "http://localhost/
icaatom/install.php/sfInstallPlugin/checkSystem" "Mozilla/5.0

(Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/
3.0.14 (.NET CLR 3.5.30729)"

127.0.0.1 - - [18/Sep/2009:14:47:45 +0200] "GET /icaatom/install.php/
sfInstallPlugin/checkSearchIndex HTTP/1.1" 200 - "http://localhost/
icaatom/install.php/sfInstallPlugin/checkSystem" "Mozilla/5.0

(Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/
3.0.14 (.NET CLR 3.5.30729)"

127.0.0.1 - - [18/Sep/2009:14:48:33 +0200] "GET /icaatom/install.php/
sfInstallPlugin/configureDatabase HTTP/1.1" 200 5434 "http://localhost/
icaatom/install.php/sfInstallPlugin/checkSystem" "Mozilla/5.0

(Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/
3.0.14 (.NET CLR 3.5.30729)"

127.0.0.1 - - [18/Sep/2009:14:48:33 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/misc/drupal.js HTTP/1.1" 304 - "http://

localhost/icaatom/install.php/sfInstallPlugin/configureDatabase"
"Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/

2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:48:33 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/misc/collapse.js HTTP/1.1" 200 2748

"http://localhost/icaatom/install.php/sfInstallPlugin/
configureDatabase" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:

1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:48:33 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/modules/system/defaults.css HTTP/1.1" 304
- "http://localhost/icaatom/install.php/sfInstallPlugin/

configureDatabase" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:

1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:48:33 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/modules/system/system.css HTTP/1.1" 304 -

"http://localhost/icaatom/install.php/sfInstallPlugin/
configureDatabase" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:

1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:48:33 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/style.css HTTP/1.1" 200
18644 "http://localhost/icaatom/install.php/sfInstallPlugin/

configureDatabase" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:

1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:48:33 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/minnelli/minnelli.css HTTP/
1.1" 200 266 "http://localhost/icaatom/install.php/sfInstallPlugin/

configureDatabase" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:

1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:48:33 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/print.css HTTP/1.1" 200
1100 "http://localhost/icaatom/install.php/sfInstallPlugin/

configureDatabase" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:

1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:48:33 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/images/menu-collapsed.gif
HTTP/1.1" 200 176 "http://localhost/icaatom/sfDrupalPlugin/vendor/
drupal/themes/garland/style.css" "Mozilla/5.0 (Windows; U; Windows NT
5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR
3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:48:33 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/images/gradient-inner.png
HTTP/1.1" 200 189 "http://localhost/icaatom/sfDrupalPlugin/vendor/
drupal/themes/garland/style.css" "Mozilla/5.0 (Windows; U; Windows NT
5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR
3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:48:33 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/themes/garland/images/task-list.png HTTP/
1.1" 200 128 "http://localhost/icaatom/sfDrupalPlugin/vendor/drupal/
themes/garland/style.css" "Mozilla/5.0 (Windows; U; Windows NT 5.1;
fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:48:33 +0200] "GET /icaatom/
sfDrupalPlugin/vendor/drupal/misc/watchdog-ok.png HTTP/1.1" 200 3217
"http://localhost/icaatom/sfDrupalPlugin/vendor/drupal/themes/garland/
style.css" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14)
Gecko/2009082707 Firefox/3.0.14 (.NET CLR 3.5.30729)"
127.0.0.1 - - [18/Sep/2009:14:48:51 +0200] "POST /icaatom/install.php/

sfInstallPlugin/configureDatabase HTTP/1.1" 302 132 "http://localhost/
icaatom/install.php/sfInstallPlugin/configureDatabase" "Mozilla/5.0
(Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/
3.0.14 (.NET CLR 3.5.30729)"

Regards,

Philippe.

[Andreas Nef]

Philippe,

I was not precise enough with the qubit_dev.php instruction. You can
do a normal installation procedure with the system checks. After that,
when the db configuration is on, replace the install.php part of the
url with qubit_dev.php and reload, fill in the connection info and
continue. Hopefully, after the script has finished, you'll get some
info on what is going wrong.
Your current access_log is strange, though, as the installation does
not even go to the loadData step. Correct?

Andreas

Am 18.09.2009 um 12:52 schrieb ptrem:

[ptrem]

Andréas,

You are right : it aborts before starting the "Load data" process. As
the 53 MySQL tables are created, I suppose it is when calling the
"load process" that fails...

When it aborts, the url displayed in the browser is :
http://localhost/icaatom/install.php/sfInstallPlugin/loadData
and it immediatly displays the "interrupted connection"...

I replaced the displayed URL by http://localhost/icaatom/qubit_dev.php/sfInstallPlugin/loadData
and it is the same : "interrupted connection"

When I replace "install.php" by "qubit_dev" for the configure database
step (that is : http://localhost/icaatom/qubit_dev.php/sfInstallPlugin/configureDatabase),
I get the following :

Warning: array_merge() [function.array-merge]: Argument #2 is not
an array in C:\xampp\sites\icaatom-1.0.7\apps\qubit\config
\qubitConfiguration.class.php on line 39

Warning: Cannot modify header information - headers already sent by
(output started at C:\xampp\sites\icaatom-1.0.7\apps\qubit\config
\qubitConfiguration.class.php:39) in C:\xampp\sites\icaatom-1.0.7\lib
\vendor\symfony\lib\response\sfWebResponse.class.php on line 335

Warning: Cannot modify header information - headers already sent by
(output started at C:\xampp\sites\icaatom-1.0.7\apps\qubit\config
\qubitConfiguration.class.php:39) in C:\xampp\sites\icaatom-1.0.7\lib
\vendor\symfony\lib\response\sfWebResponse.class.php on line 349

Then when I clic on the save and configure button, I get :

Strict Standards: Declaration of sfAnsiColorFormatter::format()
should be compatible with that of sfFormatter::format() in C:\xampp
\sites\icaatom-1.0.7\lib\vendor\symfony\lib\command
\sfAnsiColorFormatter.class.php on line 20

then the "interrupted connection" page....

Hope it helps ...

Rgds,

Philippe.

[ptrem]

Andreas,

Is there any way to load the data and configure the site manually (a
doc somewhere for that) ?

This could be a temporary solution allowing me to test the product.

Regards,

Philippe.

[ptrem]

Hi Silvana,

Did you succeed in installing the tool on windows with xampp ?

I have exactly the same issue ("interrupted connection") and if you
solved it, I would be greatful if you could tell me how.

Best regards,

Philippe.

[Andreas Nef]

Hm, this now seems to be different to all the issues I experienced,
I'm sorry I cannot give you any more inputs. Also, I don't think just
loading the data would do. But I'm sure one of the developer has
enough info now to guide you.
Anyway, I did the installation not with xampp, but with the most
recent installers for the individual packages (apache 2.2, mysql 5,
php 5.2).

Andreas

[David at Artefactual]

Hi ptrem,

This sounds like it may be a MySQL connection problem because it
occurs when the system first tries to hi the database. Can you
please post your MySQL error log, from your config file it should be
at "C:/xampp/mysql/data/mysql.err"

Also, I found this post about "connection reset" problems with XAMPP
on the ApacheFriends forum
http://www.apachefriends.org/f/viewtopic.php?f=16&t=33813

Please have a look and see if any of the proposed solutions listed
help in your case.

Regards,

David Juhasz

Software Engineer, Artefactual Systems Inc.
http://www.artefactual.com | P: 604.527.2056 | F: 604.521.2059

P.S. Andreas, thanks for all your great help in attempting to
troubleshoot this problem!

[Jack Bates]

Could also be an Apache timeout? One trick might be to sidestep Apache
- after getting the "Conexión interrumpida" error, try running from a
command line,

$ PATH_INFO=/sfInstallPlugin/loadData php web/index.php

^ Not sure if this is possible on Windows? To set
an environment variable?

When /sfInstallPlugin/loadData runs normally, in a browser, it
redirects to /sfInstallPlugin/configureSite when done. If running it
from command line works, you'll need to manually browse to /
sfInstallPlugin/configureSite when done...

On Sep 18, 9:46 am, David at Artefactual <da...@artefactual.com>
wrote:

> Hi ptrem,
>
> This sounds like it may be a MySQL connection problem because it
> occurs when the system first tries to hi the database.   Can you
> please post your MySQL error log, from your config file it should be
> at "C:/xampp/mysql/data/mysql.err"
>
> Also, I found this post about "connection reset" problems with XAMPP

> on the ApacheFriends forumhttp://www.apachefriends.org/f/viewtopic.php?f=16&t=33813

>
> Please have a look and see if any of the proposed solutions listed
> help in your case.
>
> Regards,
>
> David Juhasz

> Software Engineer, Artefactual Systems Inc.http://www.artefactual.com| P: 604.527.2056 | F: 604.521.2059

[ptrem]

Hi David,

Here my "mysql.err" log file :

090918 10:05:15 [Note] Plugin 'FEDERATED' is disabled.
090918 10:05:15 [Note] PrimeBase XT (PBXT) Engine 1.0.08 RC loaded...
090918 10:05:15 [Note] Paul McCullagh, PrimeBase Technologies GmbH,
http://www.primebase.org
090918 10:05:15 InnoDB: Started; log sequence number 0 46409
090918 10:05:16 [Note] Event Scheduler: Loaded 0 events
090918 10:05:16 [Note] C:\xampp\mysql\bin\mysqld.exe: ready for
connections.
Version: '5.1.37' socket: '' port: 3306 Source distribution
090918 10:20:23 [Note] C:\xampp\mysql\bin\mysqld.exe: Normal shutdown

090918 10:20:24 [Note] Event Scheduler: Purging the queue. 0 events
090918 10:20:24 InnoDB: Starting shutdown...
090918 10:20:26 InnoDB: Shutdown completed; log sequence number 0
46409
090918 10:20:26 [Note] PrimeBase XT Engine shutdown...
090918 10:20:26 [Warning] Forcing shutdown of 1 plugins
090918 10:20:26 [Note] C:\xampp\mysql\bin\mysqld.exe: Shutdown
complete

090918 10:20:33 [Note] Plugin 'FEDERATED' is disabled.
090918 10:20:33 [Note] PrimeBase XT (PBXT) Engine 1.0.08 RC loaded...
090918 10:20:33 [Note] Paul McCullagh, PrimeBase Technologies GmbH,
http://www.primebase.org
090918 10:20:33 InnoDB: Started; log sequence number 0 46409
090918 10:20:33 [Note] Event Scheduler: Loaded 0 events
090918 10:20:33 [Note] C:\xampp\mysql\bin\mysqld.exe: ready for
connections.
Version: '5.1.37' socket: '' port: 3306 Source distribution
090918 10:58:47 [Note] C:\xampp\mysql\bin\mysqld.exe: Normal shutdown

090918 10:58:48 [Note] Event Scheduler: Purging the queue. 0 events
090918 10:58:50 [Warning] C:\xampp\mysql\bin\mysqld.exe: Forcing close
of thread 58 user: 'icaatom'

090918 10:58:50 InnoDB: Starting shutdown...
090918 10:58:51 InnoDB: Shutdown completed; log sequence number 0
3813291
090918 10:58:51 [Note] PrimeBase XT Engine shutdown...
090918 10:58:51 [Warning] Forcing shutdown of 1 plugins
090918 10:58:51 [Note] C:\xampp\mysql\bin\mysqld.exe: Shutdown
complete

090918 10:59:11 [Note] Plugin 'FEDERATED' is disabled.
090918 10:59:11 [Note] PrimeBase XT (PBXT) Engine 1.0.08 RC loaded...
090918 10:59:11 [Note] Paul McCullagh, PrimeBase Technologies GmbH,
http://www.primebase.org
090918 10:59:12 InnoDB: Started; log sequence number 0 3813291
090918 10:59:12 [Note] Event Scheduler: Loaded 0 events
090918 10:59:12 [Note] C:\xampp\mysql\bin\mysqld.exe: ready for
connections.
Version: '5.1.37' socket: '' port: 3306 Source distribution
090918 11:45:37 [Note] C:\xampp\mysql\bin\mysqld.exe: Normal shutdown

090918 11:45:38 [Note] Event Scheduler: Purging the queue. 0 events
090918 11:45:40 [Warning] C:\xampp\mysql\bin\mysqld.exe: Forcing close
of thread 11 user: 'icaatom'

090918 11:45:40 InnoDB: Starting shutdown...
090918 11:45:40 InnoDB: Shutdown completed; log sequence number 0
8706667
090918 11:45:40 [Note] PrimeBase XT Engine shutdown...
090918 11:45:40 [Warning] Forcing shutdown of 1 plugins
090918 11:45:40 [Note] C:\xampp\mysql\bin\mysqld.exe: Shutdown
complete

090918 14:28:42 [Note] Plugin 'FEDERATED' is disabled.
090918 14:28:42 [Note] PrimeBase XT (PBXT) Engine 1.0.08 RC loaded...
090918 14:28:42 [Note] Paul McCullagh, PrimeBase Technologies GmbH,
http://www.primebase.org
090918 14:28:42 InnoDB: Started; log sequence number 0 8706667
090918 14:28:42 [Note] Event Scheduler: Loaded 0 events
090918 14:28:42 [Note] C:\xampp\mysql\bin\mysqld.exe: ready for
connections.
Version: '5.1.37' socket: '' port: 3306 Source distribution
090918 14:30:07 [Note] C:\xampp\mysql\bin\mysqld.exe: Normal shutdown

090918 14:30:08 [Note] Event Scheduler: Purging the queue. 0 events
090918 14:30:08 InnoDB: Starting shutdown...
090918 14:30:10 InnoDB: Shutdown completed; log sequence number 0
9125597
090918 14:30:10 [Note] PrimeBase XT Engine shutdown...
090918 14:30:10 [Warning] Forcing shutdown of 1 plugins
090918 14:30:10 [Note] C:\xampp\mysql\bin\mysqld.exe: Shutdown
complete

090918 14:31:10 [Note] Plugin 'FEDERATED' is disabled.
090918 14:31:10 [Note] PrimeBase XT (PBXT) Engine 1.0.08 RC loaded...
090918 14:31:10 [Note] Paul McCullagh, PrimeBase Technologies GmbH,
http://www.primebase.org
090918 14:31:11 InnoDB: Started; log sequence number 0 9125597
090918 14:31:11 [Note] Event Scheduler: Loaded 0 events
090918 14:31:11 [Note] C:\xampp\mysql\bin\mysqld.exe: ready for
connections.
Version: '5.1.37' socket: '' port: 3306 Source distribution
090918 16:21:58 [Note] C:\xampp\mysql\bin\mysqld.exe: Normal shutdown

090918 16:21:59 [Note] Event Scheduler: Purging the queue. 0 events
090918 16:22:01 [Warning] C:\xampp\mysql\bin\mysqld.exe: Forcing close
of thread 1 user: 'icaatom'

090918 16:22:01 InnoDB: Starting shutdown...
090918 16:22:01 InnoDB: Shutdown completed; log sequence number 0
18278717
090918 16:22:01 [Note] PrimeBase XT Engine shutdown...
090918 16:22:01 [Warning] Forcing shutdown of 1 plugins
090918 16:22:01 [Note] C:\xampp\mysql\bin\mysqld.exe: Shutdown
complete

090918 16:22:11 [Note] Plugin 'FEDERATED' is disabled.
090918 16:22:11 [Note] PrimeBase XT (PBXT) Engine 1.0.08 RC loaded...
090918 16:22:11 [Note] Paul McCullagh, PrimeBase Technologies GmbH,
http://www.primebase.org
090918 16:22:11 InnoDB: Started; log sequence number 0 18278717
090918 16:22:11 [Note] Event Scheduler: Loaded 0 events
090918 16:22:11 [Note] C:\xampp\mysql\bin\mysqld.exe: ready for
connections.
Version: '5.1.37-log' socket: '' port: 3306 Source distribution
090918 16:26:22 [Note] C:\xampp\mysql\bin\mysqld.exe: Normal shutdown

090918 16:26:23 [Note] Event Scheduler: Purging the queue. 0 events
090918 16:26:23 InnoDB: Starting shutdown...
090918 16:26:25 InnoDB: Shutdown completed; log sequence number 0
18699104
090918 16:26:25 [Note] PrimeBase XT Engine shutdown...
090918 16:26:25 [Warning] Forcing shutdown of 1 plugins
090918 16:26:25 [Note] C:\xampp\mysql\bin\mysqld.exe: Shutdown
complete

090918 16:26:32 [Note] Plugin 'FEDERATED' is disabled.
090918 16:26:32 [Note] PrimeBase XT (PBXT) Engine 1.0.08 RC loaded...
090918 16:26:32 [Note] Paul McCullagh, PrimeBase Technologies GmbH,
http://www.primebase.org
090918 16:26:32 InnoDB: Started; log sequence number 0 18699104
090918 16:26:32 [Note] Event Scheduler: Loaded 0 events
090918 16:26:32 [Note] C:\xampp\mysql\bin\mysqld.exe: ready for
connections.
Version: '5.1.37-log' socket: '' port: 3306 Source distribution
090918 16:47:20 [Note] C:\xampp\mysql\bin\mysqld.exe: Normal shutdown

090918 16:47:21 [Note] Event Scheduler: Purging the queue. 0 events
090918 16:47:21 InnoDB: Starting shutdown...
090918 16:47:22 InnoDB: Shutdown completed; log sequence number 0
19538672
090918 16:47:22 [Note] PrimeBase XT Engine shutdown...
090918 16:47:22 [Warning] Forcing shutdown of 1 plugins
090918 16:47:22 [Note] C:\xampp\mysql\bin\mysqld.exe: Shutdown
complete

090918 16:49:02 [Note] Plugin 'FEDERATED' is disabled.
090918 16:49:02 [Note] PrimeBase XT (PBXT) Engine 1.0.08 RC loaded...
090918 16:49:02 [Note] Paul McCullagh, PrimeBase Technologies GmbH,
http://www.primebase.org
090918 16:49:03 InnoDB: Started; log sequence number 0 19538672
090918 16:49:03 [Note] Event Scheduler: Loaded 0 events
090918 16:49:03 [Note] C:\xampp\mysql\bin\mysqld.exe: ready for
connections.
Version: '5.1.37-log' socket: '' port: 3306 Source distribution
090918 16:49:47 [Note] C:\xampp\mysql\bin\mysqld.exe: Normal shutdown

090918 16:49:48 [Note] Event Scheduler: Purging the queue. 0 events
090918 16:49:48 InnoDB: Starting shutdown...
090918 16:49:49 InnoDB: Shutdown completed; log sequence number 0
19666887
090918 16:49:49 [Note] PrimeBase XT Engine shutdown...
090918 16:49:49 [Warning] Forcing shutdown of 1 plugins
090918 16:49:49 [Note] C:\xampp\mysql\bin\mysqld.exe: Shutdown
complete


I do not see any clue in it which may help in solving my problem.

On my side, I would not suspect a MySQL issue. The 53 tables are well
created during the "Configure database" install step. Which let
suppose the MySQL access is working properly. I also have access to
all the databases using the phpMyAdmin provided with xampp without any
problem (including the database "icaatom" I created for ica-atom).
Please also note, I tried (at the first beginning) to access another
MySQL instance on one of our servers on our network and I had this
problem too (by the way, that is why I decided to use the xampp local
MySQL instance thinking it was a problem with my server :-( )

I read the ApacheFriends forum link (http://www.apachefriends.org/f/
viewtopic.php?f=16&t=33813) you provided.

I am on XP so no UAC potential issue. I also tried with both MS IE and
Firefox (even after clearing the cache) and I have the problem on
both browsers.

I am quiet sure this issue may be reproductible in the same
environment as mine : does someone already tried to install ica-atom
1.0.7 on xampp "xampp-win32-1.7.2" on Windows XP SP3 ? What was the
result ?

Finally, I also want to thank Andreas for the time he spent with me
trying to solve this issue.

I you want me to test other stuff, let me know, I really would like to
successfully install ica-atom to qualify this product which would
perfectly correspond to what we are looking for.

Keep intouch.

Rgds,

Philippe.

[David Juhasz]

Hi Philippe,

I can't see anything in your MySQL error log that indicates a problem
either, so I agree that we should look elsewhere for the problem. The
last version of XAMPP that I tested the installer with is 1.6.7, so I
will try doing the installation with XAMPP v1.7.2 and see if I can
reproduce the error. I'll post back here after I've tested the installer
out.

Regards,

--
David Juhasz,

[David at Artefactual]

Hi Philippe,

I've confirmed this issue with an install of XAMPP v1.7.2 - I received
the same error on install. :( This appears to be some problem with
the Apache, MySQL, PHP stack in this version of XAMPP which is causing
a fatal error in Apache when trying to load data. This makes it a very
difficult problem to troubleshoot as it's not a bug in our software,
but an issue in the underlying platform that the software runs on. :(

Unfortunately our 1.0.8 deadline for new features is coming up this
Sunday, 27 September - and I need to concentrate on getting my work
complete for this deadline. I will follow up on this issue, and test
if it is still a problem in ICA-AtoM v1.0.8 but it will be at least a
week before I can devote more time to this problem.

Thank you for your patience in this beta-testing phase of ICA-AtoM
development.

[ptrem]

Hi David,

Thanks a lot for your time in investigating this issue.

Knowing now that the problem could be linked to xampp, I am going to
try the installation with older xampp version and, if needed, with a
prior version of ica-atom too. I will keep you informed.

On your side, if you have other information and possibly a fix for
this issue thanks in advance in keeping me informed.

Regards,

Philippe.

[ptrem]

Hi David,

I just tried to install ica-atom on xamp 1.6.7.... Bad news :

Wathever ica-atom version I tested (1.0.7or 1.0.6 or 1.0.5) wit xampp
1.6.7, I get a blank page with only "System checks" displayed (url
displayed is : "http://localhost/icaatom/install.php/sfInstallPlugin/
checkSystem" or "..../check" for ica-atom 1.0.5 and ica-atom 1.0.6)

When I replace the "http://localhost/icaatom/install.php/
sfInstallPlugin/check" url by "http://localhost/icaatom//web/
sfInstallPlugin"(as indicated in the "Troubleshooting" part of the
installation guide), I get URL NOT FOUND (error 404 -see error_log
below-).

When I replace the "http://localhost/icaatom/install.php/
sfInstallPlugin/check" url by "http://localhost/icaatom/qubit_dev.php/
sfInstallPlugin/check" (as Andreas suggested me one day), With ica-
atom 1.0.5, I get :

"System checks

Fatal error: Call to undefined method domdocument::load() in C:\xampp
\sites\icaatom-1.0.5\plugins\sfInstallPlugin\lib\sfInstall.class.php
on line 55"

With ica-atom 1.0.6 and 1.0.7, I get the same blank page with only
"System checks" displayed .....

My access_log content is the following (only the part for ica-atom
1.0.7; it is the same with older version):

127.0.0.1 - - [23/Sep/2009:17:38:28 +0200] "GET /icaatom/ HTTP/1.1"
302 93
127.0.0.1 - - [23/Sep/2009:17:38:28 +0200] "GET /icaatom/web/index.php
HTTP/1.1" 302 112
127.0.0.1 - - [23/Sep/2009:17:38:28 +0200] "GET /icaatom/web/
install.php/sfInstallPlugin HTTP/1.1" 302 139
127.0.0.1 - - [23/Sep/2009:17:38:29 +0200] "GET /icaatom/web/
install.php/sfInstallPlugin/checkSystem HTTP/1.1" 500 1098
127.0.0.1 - - [23/Sep/2009:17:38:39 +0200] "GET /icaatom/web/
sfInstallPlugin HTTP/1.1" 404 1221
127.0.0.1 - - [23/Sep/2009:17:39:18 +0200] "GET /icaatom/web/
qubit_dev.php/sfInstallPlugin/checkSystem HTTP/1.1" 302 1313
127.0.0.1 - - [23/Sep/2009:17:39:18 +0200] "GET /icaatom/web/
install.php/sfInstallPlugin HTTP/1.1" 302 139
127.0.0.1 - - [23/Sep/2009:17:39:18 +0200] "GET /icaatom/web/
install.php/sfInstallPlugin/checkSystem HTTP/1.1" 500 1098

And here is my error_log (only for ica-atom 1.0.7; it is the same with
older version):

[Wed Sep 23 17:38:39 2009] [error] [client 127.0.0.1] File does not
exist: C:/xampp/sites/icaatom-1.0.7/web/sfInstallPlugin

So, even with an older xamp version and ica-atom 1.0.5 to 1.07, I do
not succeed in installing the product on Windows...

I am going to try on a linux machine when I will find one...

Regards,

Philippe.

PS : I wanted to attach my httpd.conf and php.ini files for you to
have a look but I did not find out how to do....

[David Juhasz]

Hi Philippe,

Did you disable DOM XML as specified in the documentation?

http://www.qubit-toolkit.org/wiki/index.php?title=Xampp_installation#Disable_DOM_XML_extension

This extension can cause conflicts with the DOM functions present in
PHP5:

http://www.apachefriends.org/f/viewtopic.php?p=122656&sid=a6d522b27a8998f0e6286a67d84fd1ee

Regards,

[ptrem]

Hi David,

Yes, I did disable DOM XML as specified in the documentation
http://www.qubit-toolkit.org/wiki/index.php?title=Xampp_installation

Regards,

Philippe

PS1 : I did follow entirely the documention and apply all what was
requested in it.

PS2 : Here are my php.ini and httpd.conf files :

php.ini :

[PHP]

;;;;;;;;;;;
; WARNING ;
;;;;;;;;;;;
; This is the default settings file for new PHP installations.
; By default, PHP installs itself with a configuration suitable for
; development purposes, and *NOT* for production purposes.
; For several security-oriented considerations that should be taken
; before going online with your site, please consult php.ini-
recommended
; and http://php.net/manual/en/security.php.


;;;;;;;;;;;;;;;;;;;
; About php.ini ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior. In order for PHP
to
; read it, it must be named 'php.ini'. PHP looks for it in the
current
; working directory, in the path designated by the environment
variable
; PHPRC, and in the path that was defined in compile time (in that
order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
;

; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably
guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;

; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from
FOO=bar.
;

; The value can be a string, a number, a PHP constant (e.g. E_ALL or
M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an
expression

; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;

; Expressions in the INI file are limited to bitwise operators and
parentheses:
; | bitwise OR

; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after
the equal
; sign, or by using the None keyword:
;

; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
;

; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend
extension),
; you may only use these constants *after* the line that loads the
extension.
;
;
;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;

; All the values in the php.ini-dist file correspond to the builtin
; defaults (that is, if no php.ini is used, or if you delete these
lines,
; the builtin defaults will be identical).

;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.

engine = On

; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off

; Allow the <? tag. Otherwise, only <?php and <script> tags are
recognized.
; NOTE: Using short tags should be avoided when developing
applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable
code,
; be sure not to use short tags.
short_open_tag = On

; Allow ASP-style <% %> tags.

asp_tags = Off

; The number of significant digits displayed in floating point
numbers.

precision = 12

; Enforce year 2000 compliance (will cause problems with non-compliant
browsers)

y2k_compliance = On

; Output buffering allows you to send header lines (including cookies)
even
; after you send body content, at the price of slowing PHP's output
layer a
; bit. You can enable output buffering during runtime by calling the
output
; buffering functions. You can also enable output buffering for all
files by
; setting this directive to On. If you wish to limit the size of the
buffer
; to a certain size - you can use a maximum number of bytes instead of
'On', as
; a value for this directive (e.g., output_buffering=4096).

output_buffering = Off

; You can redirect all of the output of your scripts to a function.
For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this
ini
; directive. Instead, explicitly set the output handler using
ob_start().
; Using this ini directive may cause problems unless you know
what script
; is doing.
; Note: You cannot use both "mb_output_handler" with
"ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and
"zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.

;output_handler =

; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer
size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression.
PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.

zlib.output_compression = Off

; You cannot specify additional output handlers if
zlib.output_compression
; is activated here. This setting does the same as output_handler but
in
; a different order.

;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to
calling the
; PHP function flush() after each and every call to print() or echo()
and each
; and every HTML block. Turning this option on has serious
performance
; implications and is generally recommended for debugging purposes
only.

implicit_flush = Off

; The unserialize callback function will be called (with the undefined
class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated.
; A warning appears if the specified function is not defined, or if
the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=

; When floats & doubles are serialized store serialize_precision
significant
; digits after the floating point. The default value ensures that when
floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100

; Whether to enable the ability to force arguments to be passed by
reference
; at function call time. This method is deprecated and is likely to
be
; unsupported in future versions of PHP/Zend. The encouraged method
of
; specifying which arguments should be passed by reference is in the
function
; declaration. You're encouraged to try and turn this option Off and
make
; sure your scripts work properly with it in order to ensure they will
work
; with future versions of the language (you will receive a warning
each time
; you use this feature, and the argument will be passed by value
instead of by
; reference).

allow_call_time_pass_reference = On

;
; Safe Mode
;

safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.

safe_mode_gid = Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)

safe_mode_include_dir =

; When safe_mode is on, only executables located in the
safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.

safe_mode_exec_dir =

; Setting certain environment variables may be a potential security
breach.
; This directive contains a comma-delimited list of prefixes. In Safe
Mode,
; the user may only alter environment variables whose names begin with
the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
;
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!

safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environment
variables that
; the end user won't be able to change using putenv(). These
variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to
change them.

safe_mode_protected_env_vars = LD_LIBRARY_PATH

; open_basedir, if set, limits all file operations to the defined
directory
; and below. This directive makes most sense if used in a per-
directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.

;open_basedir =

; This directive allows you to disable certain functions for security
reasons.
; It receives a comma-delimited list of function names. This directive
is
; *NOT* affected by whether Safe Mode is turned On or Off.

disable_functions =

; This directive allows you to disable certain classes for security
reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.

disable_classes =

; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <span style="color: ???????"> would work.

;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000

; If enabled, the request will be allowed to complete even if the user
aborts

; the request. Consider enabling it if executing long request, which

may end up
; being interrupted by the user or a browser timing out.

; ignore_user_abort = On

;
; Misc

;
; Decides whether PHP may expose the fact that it is installed on the
server
; (e.g. by adding its signature to the Web server header). It is no
security
; threat in any way, but it makes it possible to determine whether you
use PHP
; on your server or not.

expose_php = On


;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

;max_execution_time = 60 ; Maximum execution time of each script,
in seconds
;max_input_time = 60 ; Maximum amount of time each script may spend
parsing request data
;memory_limit = 32M ; Maximum amount of memory a script may
consume (16MB)

max_execution_time = 120 ; Maximum execution time of each script,
in seconds
max_input_time = 120 ; Maximum amount of time each script may spend
parsing request data
memory_limit = 64M ; Maximum amount of memory a script may
consume (16MB)


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; error_reporting is a bit-field. Or each number up to get desired
error
; reporting level
; E_ALL - All errors and warnings (doesn't include
E_STRICT)

; E_ERROR - fatal run-time errors

; Examples:
;
; - Show all errors, except for notices and coding standards
warnings
;
;error_reporting = E_ALL & ~E_NOTICE
;
; - Show all errors, except for notices
;
;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
;
; - Show only errors
;
;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
;
; - Show all errors except for notices and coding standards warnings
;

error_reporting = E_ALL & ~E_NOTICE

; Print out errors (as a part of the output). For production web
sites,
; you're strongly encouraged to turn this feature off, and use error
logging
; instead (see below). Keeping display_errors enabled on a production
web site
; may reveal security information to end users, such as file paths on
your Web
; server, your database schema or other information.
display_errors = On

; Even when display_errors is on, errors that occur during PHP's
startup
; sequence are not displayed. It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off

; Log errors into a log file (server-specific log, stderr, or
error_log (below))
; As stated above, you're strongly advised to use error logging in
place of
; error displaying on production web sites.

log_errors = Off

; Set maximum length of log_errors. In error_log information about the
source is
; added. The default is 1024 and 0 allows to not apply any maximum
length at all.

log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in same
file on same

; line until ignore_repeated_source is set true.

ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this
setting
; is On you will not log errors with repeated messages from different
files or
; sourcelines.

ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown
(on
; stdout or in the log). This has only effect in a debug compile, and
if
; error reporting includes E_WARNING in the allowed list

report_memleaks = On

; Store the last error/warning message in $php_errormsg (boolean).

track_errors = Off

; Disable the inclusion of HTML tags in error messages.

; Note: Never use this feature for production boxes.

;html_errors = Off

; If html_errors is set On PHP produces clickable error messages that
direct
; to a page describing the error or function causing the error in
detail.

; You can download a copy of the PHP manual from http://www.php.net/docs.php

; and change docref_root to the base URL of your local copy including
the
; leading '/'. You must also specify the file extension being used
including
; the dot.

; Note: Never use this feature for production boxes.

;docref_root = "/phpmanual/"

;docref_ext = .html

; String to output before an error message.

;error_prepend_string = "<font color=ff0000>"

; String to output after an error message.

;error_append_string = "</font>"

; Log errors to specified file.

;error_log = "\xampp\apache\logs\phperror.log"

; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog

;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3

; The separator used in PHP generated URLs to separate arguments.

; Default is "&".
arg_separator.output = "&amp;"

; List of separator(s) used by PHP to parse input URLs into variables.

; Default is "&".

; NOTE: Every character in this directive is considered as separator!

;arg_separator.input = ";&"

; This directive describes the order in which PHP registers GET, POST,
Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively,
often
; referred to as EGPCS or GPC). Registration is done from left to
right, newer
; values override older values.
variables_order = "EGPCS"

; Whether or not to register the EGPCS variables as global variables.
You may
; want to turn this off if you don't want to clutter your scripts'
global scope
; with user data. This makes most sense when coupled with track_vars
- in which
; case you can access all of the GPC variables through the $HTTP_*_VARS
[],
; variables.
;
; You should do your best to write your scripts so that they do not
require
; register_globals to be on; Using form variables as globals can
easily lead
; to possible security problems, if the code is not very well thought
of.

register_globals = Off

; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends. If you're not using them, it's recommended to turn
them off,
; for performance reasons.
register_long_arrays = On

; This directive tells PHP whether to declare the argv&argc variables
(that
; would contain the GET information). If you don't use these
variables, you
; should turn it off for increased performance.

register_argc_argv = On

; When enabled, the SERVER and ENV variables are created when they're
first
; used (Just In Time) instead of when the script starts. If these
variables
; are not used within a script, having this directive on will result
in a
; performance gain. The PHP directives register_globals,
register_long_arrays,
; and register_argc_argv must be disabled for this directive to have
any affect.

auto_globals_jit = On

; Maximum size of POST data that PHP will accept.

post_max_size = 16M

; Magic quotes
;

; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = On

; Magic quotes for runtime-generated data, e.g. data from SQL, from
exec(), etc.

magic_quotes_runtime = Off

; Use Sybase-style magic quotes (escape ' with '' instead of \').

magic_quotes_sybase = Off

; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =

; As of 4.0b4, PHP always outputs a character encoding by default in

; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
;
; PHP's built-in default is text/html

default_mimetype = "text/html"

;default_charset = "iso-8859-1"

; Always populate the $HTTP_RAW_POST_DATA variable.

;always_populate_raw_post_data = On


;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
;
; Windows: "\path1;\path2"

include_path = ".;\xampp\php\pear\"

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than
IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below

doc_root =

; The directory under which PHP opens the script using /~username used
only
; if nonempty.

user_dir =

; Directory in which the loadable extensions (modules) reside.

extension_dir = "\xampp\php\ext\"

; Whether or not to enable the dl() function. The dl() function does
NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is
automatically
; disabled on them.

enable_dl = On

; cgi.force_redirect is necessary to provide security running PHP as a
CGI under
; most web servers. Left undefined, PHP turns this on by default.
You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**

; cgi.force_redirect = 1

; if cgi.nph is enabled it will force cgi to always sent Status: 200
with
; every request.

; cgi.nph = 1

; if cgi.force_redirect is turned on, and you are not running under
Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable
name that PHP
; will look for to know it is OK to continue execution. Setting this
variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.

; cgi.redirect_status_env = ;

; FastCGI under IIS (on WINNT based OS) supports the ability to
impersonate
; security tokens of the calling client. This allows IIS to define
the
; security context that the request runs under. mod_fastcgi under
Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.

; fastcgi.impersonate = 1;

; Disable logging through FastCGI connection

; fastcgi.log = 0

; cgi.rfc2616_headers configuration option tells PHP what type of
headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status:
header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.

;cgi.rfc2616_headers = 0


;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.

file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default
if not
; specified).

upload_tmp_dir = "\xampp\tmp"

; Maximum allowed size for uploaded files.

upload_max_filesize = 32M

;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as
files.

allow_url_fopen = On

; Whether to allow include/require to open URLs (like http:// or ftp://)
as files.

allow_url_include = Off

; Define the anonymous ftp password (your email address)

;from="jo...@doe.com"

; Define the User-Agent string

; user_agent="PHP"

; Default timeout for socket based streams (seconds)

default_socket_timeout = 60

; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.

; auto_detect_line_endings = Off

;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
;
; If you wish to have an extension loaded automatically, use the
following
; syntax:
;
; extension=modulename.extension
;
; For example, on Windows:
;
; extension=msql.dll
;
; ... or under UNIX:
;
; extension=msql.so
;

; Note that it should be the name of the module only; no directory
information
; needs to go here. Specify the location of the extension with the
; extension_dir directive above.

; Windows Extensions
; Note that ODBC support is built in, so no dll is needed for it.
; Note that many DLL files are located in the extensions/ (PHP 4) ext/
(PHP 5)
; extension folders as well as the separate PECL DLL download (PHP 5).
; Be sure to appropriately set the extension_dir directive.

;extension=php_apc.dll
;extension=php_apd.dll
;extension=php_bcompiler.dll
;extension=php_bitset.dll
;extension=php_blenc.dll
;extension=php_bz2.dll
;extension=php_bz2_filter.dll
;extension=php_classkit.dll
;extension=php_cpdf.dll
;extension=php_crack.dll
;extension=php_curl.dll
;extension=php_cvsclient.dll
;extension=php_db.dll
;extension=php_dba.dll
;extension=php_dbase.dll
;extension=php_dbx.dll
;extension=php_dio.dll
;extension=php_docblock.dll
;extension=php_domxml.dll
;extension=php_event.dll
;extension=php_fdf.dll
;extension=php_fileinfo.dll
;extension=php_filepro.dll
;extension=php_filter.dll
;extension=php_fribidi.dll
extension=php_gd2.dll
extension=php_gettext.dll
;extension=php_gmp.dll
;extension=php_gopher.dll
;extension=php_hash.dll
;extension=php_http.dll
;extension=php_hyperwave.dll
;extension=php_ibm_db2.dll
;extension=php_id3.dll
;extension=php_ifx.dll
;extension=php_iisfunc.dll
;extension=php_imagick.dll
extension=php_imap.dll
;extension=php_ingres.dll
;extension=php_interbase.dll
;extension=php_ixsfunc.dll
;extension=php_java.dll
;extension=php_json.dll
;extension=php_ldap.dll
;extension=php_lzf.dll
;extension=php_mailparse.dll
;extension=php_maxdb.dll
extension=php_mbstring.dll
extension=php_exif.dll
extension=php_mcrypt.dll
;extension=php_mcrypt_filter.dll
;extension=php_memcache.dll
;extension=php_mhash.dll
extension=php_mime_magic.dll
extension=php_ming.dll
;extension=php_msql.dll
extension=php_mssql.dll
extension=php_mysql.dll
extension=php_mysqli.dll
;extension=php_netools.dll
;extension=php_ntuser.dll
;extension=php_oracle.dll
;extension=php_oci8.dll
;extension=php_oggvorbis.dll
;extension=php_openssl.dll
;extension=php_parsekit.dll
extension=php_pdf.dll
extension=php_pdo.dll
;extension=php_pdo_firebird.dll
extension=php_pdo_mssql.dll
extension=php_pdo_mysql.dll
;extension=php_pdo_oci.dll
;extension=php_pdo_oci8.dll
;extension=php_pdo_odbc.dll
;extension=php_pdo_sqlite.dll
;extension=php_perl.dll
extension=php_pgsql.dll
;extension=php_phpdoc.dll
;extension=php_pop3.dll
;extension=php_printer.dll
;extension=php_pspell.dll
;extension=php_radius.dll
;extension=php_runkit.dll
;extension=php_sdo.dll
;extension=php_sdo_das_xml.dll
;extension=php_shmop.dll
;extension=php_smtp.dll
;extension=php_snmp.dll
extension=php_soap.dll
extension=php_sockets.dll
extension=php_sqlite.dll
;extension=php_ssh2.dll
;extension=php_stats.dll
;extension=php_svn.dll
;extension=php_sybase_ct.dll
;extension=php_threads.dll
;extension=php_tidy.dll
;extension=php_timezonedb.dll
;extension=php_translit.dll
;extension=php_win32ps.dll
;extension=php_win32scheduler.dll
;extension=php_win32service.dll
;extension=php_win32std.dll
;extension=php_xdebug.dll
;extension=php_xmlreader.dll
extension=php_xmlrpc.dll
;extension=php_xmlwriter.dll
extension=php_xsl.dll
;extension=php_yaz.dll ; Module make problems
extension=php_zip.dll
;extension=php_zlib_filter.dll

extension=php_ps.dll
extension=php_paradox.dll

;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Date]
; Defines the default timezone used by the date functions

;date.timezone =

[Syslog]
; Whether or not to define the various syslog variables (e.g.
$LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise.
In
; runtime, you can define these variables by calling
define_syslog_variables().

define_syslog_variables = Off

[mail function]
; For Win32 only.

SMTP = localhost

smtp_port = 25

; For Win32 only.

;sendmail_from = m...@example.com

; For Unix only. You may supply arguments as well (default: "sendmail
-t -i").

;sendmail_path = "\xampp\sendmail\sendmail.exe -t"

; Force the addition of the specified parameters to be passed as extra
parameters
; to the sendmail binary. These parameters will always replace the
value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =

[SQL]
sql.safe_mode = Off

[ODBC]

;odbc.default_db = Not yet implemented

;odbc.default_user = Not yet implemented

;odbc.default_pw = Not yet implemented

; Allow or prevent persistent links.

odbc.allow_persistent = On

; Check that a connection is still valid before reuse.

odbc.check_persistent = On

; Maximum number of persistent links. -1 means no limit.

odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no
limit.

odbc.max_links = -1

; Handling of LONG fields. Returns number of bytes to variables. 0
means
; passthru.

odbc.defaultlrl = 4096

; Handling of binary data. 0 means passthru, 1 return as is, 2
convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an
explanation

; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1

[MySQL]

; Allow or prevent persistent links.

mysql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.

mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no
limit.

mysql.max_links = -1

; Default port number for mysql_connect(). If unset, mysql_connect()
will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will
only look
; at MYSQL_PORT.

mysql.default_port =

; Default socket name for local MySQL connects. If empty, uses the
built-in
; MySQL defaults.

mysql.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).

mysql.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).

mysql.default_user =

; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this
file.
; *Any* user with PHP access can run 'echo get_cfg_var
("mysql.default_password")
; and reveal this password! And of course, any users with read access
to this
; file will be able to reveal the password as well.

mysql.default_password =

; Maximum time (in secondes) for connect timeout. -1 means no limit
mysql.connect_timeout = 60

; Trace mode. When trace_mode is active (=On), warnings for table/
index scans and
; SQL-Errors will be displayed.

mysql.trace_mode = Off

[MySQLi]

; Maximum number of links. -1 means no limit.
mysqli.max_links = -1

; Default port number for mysqli_connect(). If unset, mysqli_connect
() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will
only look
; at MYSQL_PORT.

mysqli.default_port = 3306

; Default socket name for local MySQL connects. If empty, uses the
built-in
; MySQL defaults.

mysqli.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).

mysqli.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).

mysqli.default_user =

; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this
file.
; *Any* user with PHP access can run 'echo get_cfg_var
("mysqli.default_pw")
; and reveal this password! And of course, any users with read access
to this
; file will be able to reveal the password as well.

mysqli.default_pw =

; Allow or prevent reconnect
mysqli.reconnect = Off

[mSQL]

; Allow or prevent persistent links.

msql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.

msql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no
limit.

msql.max_links = -1

[PostgresSQL]
; Allow or prevent persistent links.

;pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.

;pgsql.auto_reset_persistent = Off

; Maximum number of persistent links. -1 means no limit.

;pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no
limit.

;pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.

;pgsql.ignore_notice = 0

; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.

;pgsql.log_notice = 0

[Sybase]

; Allow or prevent persistent links.

sybase.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.

sybase.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no
limit.

sybase.max_links = -1

;sybase.interface_file = "/usr/sybase/interfaces"

; Minimum error severity to display.

sybase.min_error_severity = 10

; Minimum message severity to display.

sybase.min_message_severity = 10

; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results
according
; to their Sybase type, instead of treating them all as strings. This
; compatibility mode will probably not stay around forever, so try
applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off

[Sybase-CT]
; Allow or prevent persistent links.

sybct.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.

sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no
limit.

sybct.max_links = -1

; Minimum server message severity to display.

sybct.min_server_severity = 10

; Minimum client message severity to display.

sybct.min_client_severity = 10

[bcmath]
; Number of decimal digits for all bcmath functions.

bcmath.scale = 0

[browscap]
browscap = "\xampp\php\browscap\browscap.ini"

[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =

; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =

; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =

; Allow or prevent persistent links.

ifx.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.

ifx.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no
limit.

ifx.max_links = -1

; If on, select statements return the contents of a text blob instead
of its id.
ifx.textasvarchar = 0

; If on, select statements return the contents of a byte blob instead
of its id.
ifx.byteasvarchar = 0

; Trailing blanks are stripped from fixed-length char columns. May
help the
; life of Informix SE users.
ifx.charasvarchar = 0

; If on, the contents of text and byte blobs are dumped to a file
instead of
; keeping them in memory.
ifx.blobinfile = 0

; NULL's are returned as empty strings, unless this is set to 1. In
that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0

[Session]
; Handler used to store/retrieve data.

session.save_handler = files

; Argument passed to save_handler. In the case of files, this is the
path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
;

; As of PHP 4.0.1, you can define the path as:

;
; session.save_path = "N;/path"
;
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that
purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
; session.save_path = "N;MODE;/path"
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.

session.save_path = "\xampp\tmp"

; Whether to use cookies.
session.use_cookies = 1

; This option enables administrators to make their users invulnerable
to
; attacks which involve passing session ids in URLs; defaults to 0.
; session.use_only_cookies = 1

; Name of the session (used as cookie name).

session.name = PHPSESSID

; Initialize session on request startup.

session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.

session.cookie_lifetime = 0

; The path for which the cookie is valid.

session.cookie_path = /

; The domain for which the cookie is valid.

session.cookie_domain =

; Handler used to serialize data. php is the standard serializer of
PHP.

session.serialize_handler = php

; Define the probability that the 'garbage collection' process is

started
; on every session initialization.

; The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.

session.gc_probability = 1

session.gc_divisor = 100

; After this number of seconds, stored data will be seen as 'garbage'
and
; cleaned up by the garbage collection process.

session.gc_maxlifetime = 1440

; NOTE: If you are using the subdirectory option for storing session
files
; (see session.save_path above), then garbage collection does
*not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other
method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24
minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm

; PHP 4.2 and less have an undocumented feature/bug that allows you to

; to initialize a session variable in the global scope, albeit

register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is
used.
; You can disable the feature and the warning separately. At this
time,
; the warning is only displayed, if bug_compat_42 is enabled.

session.bug_compat_42 = 1
session.bug_compat_warn = 1

; Check HTTP Referer to invalidate externally stored URLs containing
ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.

session.referer_check =

; How many bytes to read from the file.

session.entropy_length = 0

; Specified here to create the session id.

session.entropy_file =

;session.entropy_length = 16

;session.entropy_file = /dev/urandom

; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.

session.cache_limiter = nocache

; Document expires after n minutes.

session.cache_expire = 180

; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publically accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.

session.use_trans_sid = 0

; Select a hash function

; 0: MD5 (128 bits)
; 1: SHA-1 (160 bits)

session.hash_function = 0

; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
;

; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 4

; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter
will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.

url_rewriter.tags =
"a=href,area=href,frame=src,input=src,form=,fieldset="

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no
limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatability mode with old versions of PHP 3.0.

mssql.compatability_mode = Off

; Connect timeout
;mssql.connect_timeout = 5

; Query timeout
;mssql.timeout = 60

; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096

; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096

; Limits the number of records in each batch. 0 = all records in one
batch.
;mssql.batchsize = 0

; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On

; Use NT authentication when connecting to the server
mssql.secure_connection = Off

; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1

[Assertion]
; Assert(expr); active by default.

;assert.active = On

; Issue a PHP warning for each failed assertion.

;assert.warning = On

; Don't bail out by default.

;assert.bail = Off

; User-function to be called if an assertion fails.

;assert.callback = 0

; Eval the expression with current error_reporting(). Set to true if
you want
; error_reporting(0) around the eval().

;assert.quiet_eval = 0

[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost = "test-payflow.verisign.com"

; Default port to connect to.
pfpro.defaultport = 443

; Default timeout in seconds.
pfpro.defaulttimeout = 30

; Default proxy IP address (if required).
;pfpro.proxyaddress =

; Default proxy port.
;pfpro.proxyport =

; Default proxy logon.
;pfpro.proxylogon =

; Default proxy password.
;pfpro.proxypassword =

[COM]
; path to a file containing GUIDs, IIDs or filenames of files with
TypeLibs

;com.typelib_file =
; allow Distributed-COM calls

;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()

;com.autoregister_typelib = true
; register constants casesensitive

;com.autoregister_casesensitive = false
; show warnings on duplicate constat registrations
;com.autoregister_verbose = true

[mbstring]
; language for internal character representation.

;mbstring.language = Japanese

; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)

;mbstring.internal_encoding = EUC-JP

; http input encoding.

;mbstring.http_input = auto

; http output encoding. mb_output_handler must be
; registered as output buffer to function

;mbstring.http_output = SJIS

; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.

;mbstring.encoding_translation = Off

; automatic encoding detection order.
; auto means

;mbstring.detect_order = auto

; substitute_character used when character cannot be converted
; one from another

;mbstring.substitute_character = none;

; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions

;mbstring.func_overload = 0

[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On

;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128

;fbsql.batchSize = 1000

[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as
JIS.
; With mbstring support this will automatically be converted into the
encoding
; given by corresponding encode setting. When empty
mbstring.internal_encoding
; is used. For the decode settings you can distinguish between
motorola and
; intel byte order. A decode setting cannot be empty.

;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS

;exif.decode_jis_intel = JIS

[Tidy]
; The path to a default tidy configuration file to use when using tidy

;tidy.default_config = /usr/local/lib/php/default.tcfg

; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html
content
; such as dynamic images

tidy.clean_output = Off

[soap]
; Enables or disables WSDL caching feature.

soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.

soap.wsdl_cache_dir="\xampp\tmp"

; (time to live) Sets the number of second while cached file will be
used
; instead of original one.

soap.wsdl_cache_ttl=86400

[mime_magic]
mime_magic.magicfile = "\xampp\php\extras\magic.mime"
;mime_magic.debug = On


[Zend]
zend_extension_ts = "\xampp\php\zendOptimizer\lib
\ZendExtensionManager.dll"
zend_extension_manager.optimizer_ts = "\xampp\php\zendOptimizer\lib
\Optimizer"
zend_optimizer.enable_loader = 0
zend_optimizer.optimization_level=15
;zend_optimizer.license_path =

; Local Variables:
; tab-width: 4
; End:

[XDebug]
;; Only Zend OR (!) XDebug
;zend_extension_ts="\xampp\php\ext\php_xdebug.dll"
;xdebug.remote_enable=true
;xdebug.remote_host=127.0.0.1
;xdebug.remote_port=9000
;xdebug.remote_handler=dbgp
;xdebug.profiler_enable=1
;xdebug.profiler_output_dir="\xampp\tmp"

[Memcache]
;memcache.allow_failover = 1
;memcache.max_failover_attempts=20
;memcache.chunk_size =8192
;memcache.default_port = 11211

[APC]
;zend_extension = ""
;apc.mode = on
;apc.mode = shm

[eAccelerator]
;extension=eaccelerator.dll
;eaccelerator.shm_size = "0"
;eaccelerator.cache_dir = "\xampp\tmp"
;eaccelerator.enable = "1"
;eaccelerator.optimizer = "0"
;eaccelerator.debug = "0"
;eaccelerator.check_mtime = "1"
;eaccelerator.filter = ""
;eaccelerator.shm_max = "0"
;eaccelerator.shm_ttl = "0"
;eaccelerator.shm_prune_period = "0"
;eaccelerator.shm_only = "0"
;eaccelerator.compress = "1"
;eaccelerator.compress_level = "9"
;eaccelerator.keys = "shm_and_disk"
;eaccelerator.sessions = "shm_and_disk"
;eaccelerator.content = "shm_and_disk"
;eaccelerator.admin.name =
;eaccelerator.admin.password =


httpd.conf :

#
# This is the main Apache HTTP server configuration file. It contains
the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2/> for detailed
information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are
unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for
many
# of the server's control files begin with "/" (or "drive:/" for
Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/xampp/apache" will be interpreted by the
# server as "/xampp/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is
located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

# ThreadsPerChild: constant number of worker threads in the server
process
# MaxRequestsPerChild: maximum number of requests a server process
serves
ThreadsPerChild 250
MaxRequestsPerChild 0

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile
directive
# at a local disk. If you wish to share the same ServerRoot for
multiple
# httpd daemons, you will need to change at least LockFile and
PidFile.
#
ServerRoot "/xampp/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a
DSO you
# have to place corresponding `LoadModule' lines at this location so
the
# directives contained in it are actually available _before_ they are
used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule autoindex_module modules/mod_autoindex.so # don't load
because of mod_autoindex_color.so
#LoadModule bucketeer_module modules/mod_bucketeer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule ssl_module modules/mod_ssl.so

LoadModule autoindex_color_module modules/mod_autoindex_color.so
#LoadModule mysql_auth_module modules/mod_auth_mysql.so
#LoadModule auth_remote_module modules/mod_auth_remote.so
#LoadModule sspi_auth_module modules/mod_auth_sspi.so
#LoadModule log_sql_module modules/mod_log_sql.so
#LoadModule log_sql_mysql_module modules/mod_log_sql_mysql.so
#<IfModule ssl_module>
# LoadModule log_sql_ssl_module modules/mod_log_sql_ssl.so
#</IfModule>
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule xmlns_module modules/mod_xmlns.so
#LoadModule proxy_xml_module modules/mod_proxy_xml.so
#LoadModule bw_module modules/mod_bw.so

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. ad...@your-domain.com
#
ServerAdmin xxx@yyy

#
# ServerName gives the name and port that the server uses to identify
itself.
# This can often be determined automatically, but we recommend you
specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP
address here.
#
ServerName localhost:80
ServerName xyz.inria.fr:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory,
but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/xampp/htdocs"

#
# Each directory to which Apache has access can be configured with
respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/xampp/htdocs">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options
All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please
see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks Includes ExecCGI

#
# AllowOverride controls what directives may be placed
in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride All

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.php index.php4 index.php3 index.cgi index.pl
index.html index.htm index.shtml index.phtml
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from
being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
<VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
#LogLevel warn
LogLevel debug

<IfModule log_config_module>
#
# The following directives define some format nicknames for use
with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common

<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
Agent}i\" %I %O" combinedio
</IfModule>

#
# The location and format of the access logfile (Common Logfile
Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog logs/access.log common

#
# If you prefer a logfile with access, agent, and referer
information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access.log combined
</IfModule>

<IfModule alias_module>
# Required for display of the qubit_dev css
# Must come *before* the /ica-atom alias below
Alias /icaatom/sf "/xampp/sites/icaatom-1.0.7/lib/vendor/symfony/
data/web/sf"

# Alias to ica-atom web directory
Alias /icaatom "/xampp/sites/icaatom-1.0.7"

# Alias /icaatom "/xampp/sites/icaatom-1.0.7/web"
#
# Redirect: Allows you to tell clients about documents that used
to
# exist in your server's namespace, but do not anymore. The
client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server
scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications
and
# run by the server when requested rather than as documents sent
to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "/xampp/cgi-bin/"

</IfModule>

#
# "/xampp/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/xampp/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

# set icaatom permissions for the aliased directory
<Directory "/xampp/sites">
AllowOverride All
Options Indexes FollowSymLinks Includes ExecCGI
Order allow,deny
Allow from all
</Directory>

#
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the
symbols
# pound (#) and exclamation (!) followed by the path of the program
that
# can execute this specific script. For a perl script, with perl.exe
in
# the C:\Program Files\Perl directory, the shebang line should be:

#!c:/program files/perl/perl

# Note you _must_not_ indent the actual shebang line, and it must be
the
# first line of the file. Of course, CGI processing must be enabled
by
# the appropriate ScriptAlias or Options ExecCGI directives for the
files
# or directory in question.
#
# However, Apache on Windows allows either the Unix behavior above, or
can
# use the Registry to match files by extention. The command to
execute
# a file of this type is retrieved from the registry by the same
method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer
View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the
Edit
# button allows you to modify the Actions, of which Apache 1.3
attempts to
# perform the 'Open' Action, and failing that it will try the shebang
line.
# This behavior is subject to change in Apache release 2.0.
#
# Each mechanism has it's own specific security weaknesses, from the
means
# to run a program you didn't intend the website owner to invoke, and
the
# best method is a matter of great debate.
#
# To enable the this Windows specific behavior (and therefore -
disable- the
# equivilant Unix behavior), uncomment the following directive:
#
#ScriptInterpreterSource registry
#
# The directive above can be placed in individual <Directory> blocks
or the
# .htaccess file, with either the 'registry' (Windows behavior) or
'script'
# (Unix behavior) option, and will override this server default
option.
#

#
# DefaultType: the default MIME type the server will use for a
document
# if it cannot otherwise determine one, such as from filename
extensions.
# If your server contains mostly text or HTML documents, "text/plain"
is
# a good value. If most of your content is binary, such as
applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings
from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
# AddHandler allows you to map certain file extensions to
"handlers":
# actions unrelated to filetype. These can be either built into
the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options"
directive.)
#
AddHandler cgi-script .cgi

# For files that include their own HTTP headers:
#AddHandler send-as-is asis

# For server-parsed imagemap files:
#AddHandler imap-file map

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the
client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options"
directive.)
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints
from the
# contents of the file itself to determine its type. The
MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
EnableMMAP off
EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default
configuration of
# the server, or you may simply copy their contents here and change
as
# necessary.

# XAMPP specific settings
Include conf/extra/httpd-xampp.conf

# Server-pool management (MPM specific)
# Include conf/extra/httpd-mpm.conf

# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf

# Language settings
Include conf/extra/httpd-languages.conf

# User home directories
Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
Include conf/extra/httpd-dav.conf

# Various default settings
Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf

#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random
equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

[Silvana Temesio]

Hi, No I didn`t suceed and I have read carefully all thread and It
seems to be the same problem.
I was trying to contact somebody on Brazil , because they are going to
work with this system on archives, but I couldn´t find anyone yet. I
asked Oskar Calvo a spanish profesional that works with this software
and he told me that he succeded on Ubuntu, and I am going to try, but
the problem is that most students are not yet familiar on linux, so it
´s easier to teach on windows although when they install to work on an
archive they get somebody that installs on linux. In a word, it´s
important to get running on windows for teaching reasons and I will
hope somebody finds a workaround. If I get one I will let you know
Thanks both

Silvana Temesio

[Carolina Sacramento]

Hi Philippe,

did you try to install ICA-AtoM1.0.7 on a Linux machine? I'm having
exactly the same issue as you and Silvana (the instalation process
stops in loadData), but it is occurs in Ubuntu.

I'm using the follow versions of software:

Apache 2.2.14, PHP5.3.0 and Mysql 5.1.31.


Did anybody have sucess in instalation using these versions? ... Does
anybody know what is happening in my case?


Regards,
Carolina

[David Juhasz]

Hi Carolina,

Ubuntu is what we use in the office for running, developing and
testing ICA-AtoM - so the installer should definitely work in
Ubuntu! :) I'm not sure what versions of PHP, Apache & MySQL we are
running exactly (I'll check when I go in to work tomorrow) but it
should run fine with the versions you have. Now we just need to
figure out why it's not working. :)

Have you had a chance to try the "qubit_dev.php" development URL
listed below (e.g. http://www.example.com/ica-atom/web/qubit_dev.php/sfInstallPlugin/loadData
")? This should give you an error message that will give us a better
idea of what is going wrong. Please try this, and post any error
messages back to this forum.

Thanks,

[Carolina Sacramento]

David,

I'm sorry, but I really didn't saw your answer before.

I had sucess when installing the Qubit from subversion repository ,
but I'm still having problems with the ICA-AtoM (http://pear.qubit-
toolkit.org/get/icaatom-1.0.7.tgz).

When I try to install using this file "qubit_dev.php", the follow
message is displayed:

"You are not allowed to access this file. Check qubit_dev.php for more
information.".

What is wrong in my procedure?


On 13 out, 02:24, David Juhasz <da...@artefactual.com> wrote:
> HiCarolina,

>
> Ubuntu is what we use in the office for running, developing and  
> testing ICA-AtoM - so the installer should definitely work in  
> Ubuntu! :)  I'm not sure what versions of PHP, Apache & MySQL we are  
> running exactly (I'll check when I go in to work tomorrow) but it  
> should run fine with the versions you have.  Now we just need to  
> figure out why it's not working. :)
>
> Have you had a chance to try the "qubit_dev.php" development URL  

> listed below (e.g.http://www.example.com/ica-atom/web/qubit_dev.php/sfInstallPlugin/loa...

> ")?  This should give you an error message that will give us a better  
> idea of what is going wrong.  Please try this, and post any error  
> messages back to this forum.
>
> Thanks,
>
> David Juhasz,

> Software Engineer, Artefactual Systems Inc.http://www.artefactual.com| P: 604.527.2056 | F: 604.521.2059

[David at Artefactual]

Hi Carolina,

Oops, I should have mentioned that the "qubit_dev.php" file is only
accessible from the same computer as ICA-AtoM is running on. This is
a security precaution so malicious users can't see errors in the
site. If you can't run a browser on the same computer as the ICA-AtoM
installation, then you can allow access to other computers by editing
the "ica-atom/web/qubit_dev.php" file, as so:

if (!in_array(@$_SERVER['REMOTE_ADDR'], array('127.0.0.1', '::1',
'192.168.1.100')))
{

Where "192.168.1.100" is the IP for your client computer (the one that
you are trying to run the installer from).

You may also be able to find errors on the *server* by using the
following command:

> sudo tail /var/log/apache2/error.log

You can paste any error messages to this forum (be sure not to include
any private information) or send them to my personal account with the
"Reply to author" link.

---

Regards,

[David Juhasz]

Hi Carolina,

I've tried to answer your questions below.

On 27-Oct-09, at 7:10 AM, Carolina Sacramento wrote:

Hi David,

I'm still having problems.. I tryed to install using this file as parameter and the following error is showed when I try to "checkSystem" with it:


"Fatal error: Uncaught exception 'PropelException' with message 'Unable to open PDO connection [wrapped: SQLSTATE[28000] [1045] Access denied for user 'root'@'localhost' (using password: NO)]' in ...

This can occur after an install fails before the full installation can complete.  Try deleting the following files, and running the installer again:

config/propel.ini

config/database.yml

apps/qubit/config/settings.yml

(NOTE: DO NOT delete the config/propel.ini.tmpl", "config/database.yml.tmpl", or "apps/qubit/config/settings.yml.tmpl" files. These files are required for the installer to run) 

Initially, my problem occured when I tryed to "loadData". Then, I did all the steps of installation using the traditional method (install.php) and when the moment to loading data came, I changed "install.php" for "qubit_dev.php" (http://icaatom-1.0.7/web/qubit_dev.php/sfInstallPlugin/loadData), and that terrible blank page appears.. (on firefox) =(


These are the messages of Apache's error log:

" PHP Warning:  Directive 'register_long_arrays' is deprecated in PHP 5.3 and greater in Unknown on line 0
...
[Tue Oct 27 11:56:06 2009] [notice] child pid 1445 exit signal Segmentation fault (11)
[Tue Oct 27 11:56:07 2009] [notice] child pid 1446 exit signal Segmentation fault (11)
[Tue Oct 27 11:56:43 2009] [notice] child pid 1447 exit signal Segmentation fault (11) "

Oh no! Segmentation faults are a big problem because it means something went very wrong with PHP (the programming language we use).  It's good news if the installer is working for you subversion though, it means we may have fixed this bug in the newest version of the code.

I succeeded to install the qubit from the subversion trunk. What is the difference between qubit and icaatom-1.0.7 from ICA site? In our case, we need to customize the version 1.0.7/.08 to apply the changes made for us, in a instalation of 1.0.4 version. In our case, is more appropriate to work in the svn version? On November 2nd - the date when the new version will be avaliable, will the svn server updated too?

The qubit trunk is always are most recent version of the software - we make changes to this version almost every day.  This means that the qubit trunk always has the latest fixes, but it also has all the latest bugs - it's not fully tested so it's not as stable as the ICA-AtoM branch.   The ICA-AtoM branch gets updated every time we release a major revision (e.g. 1.0.7, 1.0.8, etc.) so it is usually months old.

When the 1.0.8 revision is released, we will update the ICA-AtoM branch as well.  We use this branch of the subversion repository to create the tarball, demo CD, and other versions of ICA-AtoM.

I'd recommend using the ICA-AtoM 1.0.8 release when it's available - you will be able to migrate your 1.0.4 data straight to 1.0.8.  Hopefully this will resolve your problems with the installer.

Regards,