Resetting Bar Graph Peak Values

[Muscavitch, Matthew L CTR The Boeing Company, B3221]

Is there a way to reset the peak values in the bar graph without having to go into MultiGraphControl properties? Also what does the "ShowMagResetValue" do? I change between true and false and see no change.

Thanks,
Matt

[Tai Ward]

Matt,

The "ShowMagRestValue" draws a line at the value set by the
"PeakResetValue" property. So if the "PeakResetValue" is set to 50,
setting the "ShowMagResetValue" to "True" will draw a line (for
reference) at the 50 mark.

If you are not seeing any line, check to make sure the
"PeakResetValue" is within the "ScaleMin" and ScaleMax" range of the
display. It might be drawing it out of range for the display or if
your using a scale from 0-N, then it's drawing the line at on the
edge.

Tai

On Dec 17, 12:26 pm, "Muscavitch, Matthew L CTR The Boeing Company,

>  smime.p7s
> 7KViewDownload

[Tai Ward]

Matt,

No. There is not a hot key press to reset the peak value. but there is
the "PeakHoldSeconds" property that, when set to "0" will never reset
the peak value. You could link a Button control to the
"PeakHoldSeconds" properties value to manually control a reset.

If you need help, let us know and we can help you set it up.

Tai

On Dec 17, 12:26 pm, "Muscavitch, Matthew L CTR The Boeing Company,
B3221" <matthew.muscavitch....@navy.mil> wrote:

>  smime.p7s
> 7KViewDownload

[Muscavitch, Matthew L CTR The Boeing Company, B3221]

Tai,

Didn't even think of creating a button control for that. Worked exactly how I wanted it to.

Thanks
Matt

Matt,

Tai

--

You received this message because you are subscribed to the Google Groups "IADS" group.
To post to this group, send email to ia...@googlegroups.com.
To unsubscribe from this group, send email to iads+uns...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/iads?hl=en.