Test Point Log

[Christian Reinecke]

Hello, 

I have following question:

It seems that the 'TestPoint' attribute which is being stored inside the PlannedTestPoint  Table is not anymore available on the TestPointLog, after the test point has been executed. Only the 'Maneuver' attribute is transfered to the TestPointLog. See screenshot below.

Is it possible to transfer also the TestPoint Identifier/Attribute into the Log? 

Thank you

Chris

[Chant, Adam]

Chris,
Please verify the settings for “TestPoint Identification Type” and TestPoint Log Settings along with what appears in the TesPoint selector box.

 

You will find that the combination of TestPoint Identification Type and TestPoint Log Settings will effect what columns are populated in the Test Points Log.
In your case I think that you may have AutoComplete Lot Entry if TestPoint Know unchecked which is not allowing the other columns from the Planned Test Point Table to populate into the TestPoints Log.

Thank you,

Adam Chant
Project Engineer, IADS

Curtiss-Wright
190 Sierra Court A-3 Palmdale, CA 93550
T: 661.273.7003 x 2210
ach...@curtisswright.com

iads-s...@curtisswright.com

 

From: 'Christian Reinecke' via IADS <ia...@googlegroups.com>
Sent: Wednesday, July 16, 2025 3:58 AM
To: IADS <ia...@googlegroups.com>
Subject: [IADS] Test Point Log [EXTERNAL]

 

WARNING: This message came from an external source. Please exercise caution and proper judgment when opening any attachments, clicking links or responding to this message.

---

 

--
You received this message because you are subscribed to the Google Groups "IADS" group.
To unsubscribe from this group and stop receiving emails from it, send an email to iads+uns...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/iads/110ea353-ece2-4a08-a5aa-0ca477f1c17cn%40googlegroups.com.

---

This e-mail and any files transmitted with it are proprietary and intended solely for the use of the individual or entity to whom they are addressed. If you have reason to believe that you have received this e-mail in error, please notify the sender and destroy this e-mail and any attached files. Please note that any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the Curtiss-Wright Corporation or any of its subsidiaries. Documents attached hereto may contain technology subject to government export regulations. Recipient is solely responsible for ensuring that any re-export, transfer or disclosure of this information is in accordance with applicable government export regulations. The recipient should check this e-mail and any attachments for the presence of viruses. Curtiss-Wright Corporation and its subsidiaries accept no liability for any damage caused by any virus transmitted by this e-mail.

For information about how we process personal data and monitor communications, please visit https://www.curtisswright.com/privacy-notice/default.aspx