Grooming Report Cle Elum R.D.

6 views
Skip to first unread message

Simon, John K -FS

unread,
Mar 12, 2016, 4:39:45 PM3/12/16
to AJ Parlan, berk...@yahoo.com, C Kenning, Dan Jonassen, Davis, Debra E -FS, Fouts, Dawn M -FS, Dick Burroughs, Herman, Jon R -FS, i90corrid...@googlegroups.com, Joe, Jones, Nancy A -FS, Lara Gricar, Larned, Kimberly A -FS, Matt Kauffman, mca...@q.com, Novitzky, Pam -FS, Richard Low (richardlow5@gmail.com), threed...@yahoo.com, to...@mtcfoodequipment.com, Tom Carmody, win...@parks.wa.gov

Hi Everyone, Yesterday we groomed out of the Kachess Snowpark and did the complete system and we will do the same today. Out of the Blewett Snowpark we did the Table Mtn. route over to Reecer Cr to the 3507 rd. down it to the 115 snowshoe ridge and back to the 3500 rd. then back and down the Naneum Mdw. rd. then back to the snowpark. We will do the same today except we will not groom the 3507 and we will go out to Haney Mdw.  Just for your information most of the low elevation snowparks and staging areas on the east end of the district are losing enough of the snow we can’t groom to them or out of them without doing damage to the groomers and the roads or campgrounds. I will let you know when we close the gate at Mineral Springs, it will most likely be very soon. Please be careful, the snow at the higher elevations is still hanging in there but is very poor at the low elevations and in the middle is in transition. The creeks are flowing higher and in some cases will be covered with a thin layer of snow over deep holes down to the running water.  Be safe, have fun but let other know where you will be.  John





This electronic message contains information generated by the USDA solely for the intended recipients. Any unauthorized interception of this message or the use or disclosure of the information it contains may violate the law and subject the violator to civil or criminal penalties. If you believe you have received this message in error, please notify the sender and delete the email immediately.
Reply all
Reply to author
Forward
0 new messages