Extension cable for Hakko soldering iron?

[Jeff Bannow]

Anyone know where I might be able to acquire an extension cable for a Hakko FX888D soldering iron?  I'd like to extend the iron another 3 feet or so from the base station.

Here's the connector:

https://cdn.sparkfun.com//assets/parts/7/8/8/5/11704-03.jpg

-------
Jeff Bannow

maker
network administrator
traditional darkroom photographer
www.jeffbannow.com

[eric©]

Make one?  Just standard DIN connectors....

Eric

--
You received this message because you are subscribed to the Google Groups "i3 Detroit Public" group.
To unsubscribe from this group and stop receiving emails from it, send an email to i3detroit-publ...@googlegroups.com.
To post to this group, send email to i3detroi...@googlegroups.com.
Visit this group at http://groups.google.com/group/i3detroit-public.
For more options, visit https://groups.google.com/d/optout.

[Jeff Bannow]

Good idea - anyone know what DIN that is?

-------
Jeff Bannow

maker
network administrator
traditional darkroom photographer
www.jeffbannow.com

[eric©]

Regular DIN...same thing used on old school PC keyboard (not the mini stuff used with PS/2 connectors).

Just match the number of pins...the spacing is standard, and you can probably find then at Radio Shack.

Eric

[Evan Allen]

The spacing is somewhat standard, for example din 5 has a 180 degree and 270 degree variant.  That being said it looks like a din 6 (same as the commodore 64 iec cables)