How to wire water valves
45 views
Skip to first unread message
ThomasS
Aug 22, 2015, 4:17:32 AM8/22/15
to hydro control
This wiring works for fixed flow valves.
That is, the valve shall be either completely open or completely closed, no half-open position.
This is for example useful if you have more than one turbine on a shaft or if your turbine casing has 2 or more nozzles.
The 24V is of course only one possibilty. It depends on the nominal voltage of your valve motor.
The hydrocontrol can operate up to 5 valves in standard configuration.
Wiring for variable flow valves will come soon.
That is, the valve shall be either completely open or completely closed, no half-open position.
This is for example useful if you have more than one turbine on a shaft or if your turbine casing has 2 or more nozzles.
The 24V is of course only one possibilty. It depends on the nominal voltage of your valve motor.
The hydrocontrol can operate up to 5 valves in standard configuration.
Wiring for variable flow valves will come soon.
Reply all
Reply to author
Forward
0 new messages