Reset Smc Macbook Pro 2016 Touch Bar
Julie Followell
When trying to set up the touch ID it says I have reached the fingerprint limit. I have tried resetting SMC and all the other suggested in another trail. I even reinstalled the Mac OS. I never dropped the macbook nor spilled liquid in it. Is there anything else anyone can suggest to try to fix it before i bring it the the macstore? It was working fine until I decided I wanted to add a new fingerprint. Then I started to get the message about Fingerprint limit reached, and that was that, it stopped working.
Resetting the NVRAM following these directions by LeroyDouglas, I had already reset the SMC, so I proceded to reset the NVRAM/PRAM holding the keys indicated by LeroyDouglas until i got the chime. Then, voila!
THANK YOU SO MUCH! It worked! You saved me, I was going crazy about this issue and had been dealing with it for months. You are a life saver. Honestly, THANKS I wish good things come to you, meanwhile I will follow my motto of paying it forward, helping others whenever I can.
Why did it work for a few hours and then i put it to sleep came back to it, and the fingerprint stopped working, when i tried to log in with it, it gave me the option but as i placed my finger on the button, it did not read it.
My question is, why did it work for a few hours after i reset the NVRAM? Could it be a system issue since it did work for a few hours. I was able to set up my fingerprint and used it a few times at restarting and entering passwords.
Also, would it be too much to ask if you could show me how to reply to a post here and have the post inserted in my reply, I click on reply to your post but it only opens the composer window, that is why my replies are showing as a new post. Anyhow, I greatly appreciate your help with this issue.
You may try quitting your MacBook Pro forcefully. On your screen, click the Apple logo in the upper left corner. Hit Force Quit. Click Force Quit after selecting the app where the Touch Bar isn't functioning. Verify that you wish to shut off the app once more.
Is the touch bar of your Macbook Pro not working? If yes, the article will show you the necessary fixes to quickly eliminate this problem! However, MacBook Pro's touch bar is an OLED multi-touch strip offering a top-notch way to rapidly access app-oriented and system-level functions.
Despite its maximum usability, the issue of the MacBook Pro Touch Bar not working could appear anytime out of the blue! However, there could be thousands of reasons for an unresponsive touch bar on your MacBook Pro. The most common reasons are the following:
This article has listed the top 7 fixes to eliminate the "MacBook Pro Touch Bar not working water damage" issue. Therefore, if the touch bar isn't lighting up, freezes frequently, and remains unresponsive, these are the must-try fixes.
In several instances, a hassle-free restart can assist you in resolving minor issues on your Macbook Pro. Some minor bugs are messing with your MacBook, which is why its touch bar is unresponsive. Luckily, you can fix the Touch Bar not working issue by restarting your MacBook Pro. The steps are the following:
Step 3. A pop-up window will open with comprehensive details about your Mac. After that, you must opt for "Software Update." If the macOS Monterey update stuck, you can find multiple solutions by clicking this link.
Since we've already ruled out software flaws and problematic programs, if your touch bar is still not working, you must have a look at a more technical problem. Let's check if your settings are correct.
The touch bar is configured to show a particular set of keys and functions depending on your Mac application. It's possible for the software controlling the touch bar's functions to stop functioning as planned occasionally.
Your Intel-powered MacBooks have a chip called the System Management Controller (SMC) that manages several operations and features connected to the hardware, including the power button, LED indicators, battery, CPU, and keyboard.
On the other hand, the default values for the starting disk, virtual memory, and even some hardware components are stored in the PRAM (Parameter RAM), a crucial storage space for information about your Mac. If none of the aforementioned fixes worked, resetting the PRAM can help restore the touch bar to its default settings. Here's how to make PRAM reset Mac:
Imagine that after switching to a specific app, you discover that the Mac Touch Bar is not functioning or displaying controls. The program is probably creating minimal issues and crashing hidden processes, which could prevent Touch Bar from functioning correctly. In that scenario, closing the troublesome app with force is necessary to fix the Touch Bar on a MacBook Pro. The steps are given below:
It's time to seek professional assistance if you've tried everything to resolve MacBook Pro Touch Bar not working issue that Intel or M1 powers. Sometimes, a serious issue arises that cannot and should not be resolved at your end.
If your MacBook Pro has hardware or water damage, you can experience issues with the Touch Bar. It is advised to have your Mac diagnosed at the Apple shop in such circumstances. Please avoid using low-cost substitutes since they can damage your MacBook beyond repair.
MacBook Pro Touch Bar not working issue may lead to data loss while trying these aforementioned fixes, especially fixing the problem by updating the macOS. The update may get stuck and cause data loss. But you can eliminate this issue right off the bat when you have top-notch data recovery software! We're talking about EaseUS Data Recovery Wizard for Mac, the best software to retrieve endless data after unforeseen deletion.
This professional tool can recover files of all sizes, including a single Office Word document and a large number of photos that you store on your Mac, from various data loss scenarios. The following advanced recovery features help your Mac's data recovery:
Note: Before data recovery, you'd better click "Disk Backup" from the left sidebar to create a backup of your Mac to avoid further data loss. After backing up, the software can recover data from the Mac backup, and your computer can wirte new data again.
This marks the conclusion of our tutorial on how to resolve the MacBook Pro Touch Bar not working issue. We hope these seven efficient workarounds have helped you resolve those problematic issues and that your Mac Touch Bar operates without a hitch. If your data is lost accidentally while trying the fixes, this EaseUS Data Recovery Wizard is worth using.
That's right. When you shut down a Mac you are logging out of your account. Any time you log out of your account you need to log back in again with a password. You can't use Touch ID to log in for the first time.
Think of it like two levels of security. The highest level requires a password to get access to your Mac user account. The second level only requires Touch ID. There is no "no password, only Touch ID" level. You always have to enter your password the first time you access the account.
The technical reason is the Secure Enclave. That is where some high security data resides on your Mac. This includes the fingerprint data used by Touch ID. So when you first log in, the Secure Enclave is locked. You can't use Touch ID yet, because there is nothing to match your fingerprint to. But when you log in with your password, it unlocks the Secure Enclave and now you can use Touch ID.
If this is an inconvenience, then what you should do is simply stop shutting down your Mac. There's no reason to, and in fact you shouldn't. See -beginners-guide-to-whether-to-shut-down-or-sleep-your-mac.html
Krishna: A "Restart" is just a Shut Down + Start Up. Either way, the important part is that you are LOGGED OUT when you do it. Logging out means you need to authenticate again (enter password) to be able to use Touch ID.
I set up Touch ID about five days again out of concern of a security breach. For context, I recently divorced an executive level expert in cloud security engineering with a major tech corporation. I have not shut down my computer at any point since doing so. Two times now has asked for a password prior to logging in with touch-id and without being in sleep mode for longer than 6 - 8 hours tops. Should I be concerned?
simple solution. delete password..... ya would be nice to have some kind of security but if you dont want a password just delete it..... i did.... good thing i dont care about this mac geting attacked.....
I'm experiencing a touch ID issue with my mac. Every time after an inactive session, its asking for pwd to enable touch ID. It was not like this before. A single touch of any keys on keyboard will wake the screen and touch ID will let me unlock the machine. But for the past two days, when i try to wake my scree after some inactive time, i see loading bar comes up for 10 secs and then login prompt comes out and asking for pwd. I even set as "NEVER" for pwd required after display is turned off.
Gary Rosenzweig - Thanks. i did connect but they have no clue and asking me to go to recovery mode and reinstall the OS. When I close the lid and open it after few seconds, i see loading bar comes up and loads for 10 secs and then asking for password even though touch ID is in place. I also don't see lid settings, this is MacBook Pro - MacOS Ventura 13.6.2
Sherry: If you don't remember you password to log into your Mac, then that could be a major problem. It depends on how old your Mac is (version of macOS) and other factors. I would call Apple Support and work with them on this.
Hey Garry. I am new to macbook and i have this mba m1. I forgot my mac password and now i need to update my software but it requires me to enter password, theres no option for a touch id. Is there anything i can do with this? Thank you so much. I hope you see this.
d3342ee215