The Procedure Could Not Be Located In The Dll

0 views

Skip to first unread message

Shari Alvine

unread,

Aug 3, 2024, 4:51:12 PM8/3/24

to huastpuncrata

When I start my executable, I get a message "Procedure entry point __kmpc_aligned_alloc could not be located in the dynamic link library / MyExecutable.exe". This is a new occurrence; I have successfully built and run this app for years.

Copying run-time DLLs into the executable directory is the worst solution to this problem. The best solution is to install the redistributables (see Solved: PSA: Update the Runtime Library when you update the compiler! - Intel Communities , but note that this is not necessary with recent compiler installs as discussed later in the thread.) This will copy a compatible set of the run-time DLLs to a common place on the system and add that location to the PATH system environment variable.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

After upgrading from Jabber 11.1.2 to 11.5.0, Jabber runs fine until I restart my computer. After a reboot a get the following message "The procedure entry point could not be located in the dynamic link library C:\Program Files (x86)\Cisco Systems\Cisco Jabber\services\MeetingService\MeetingService.dll". After clicking "OK" the box goes away and immediately comes back.

After restarting Jabber I am no longer getting the error messages. The meetings tab is still updating normally, but the deleted files did not come back as I expected them to. Maybe left over from an old Jabber version?

From what I can see ServicesFramework.dll is defiantly required in 11.5 perhaps the MSI is not updating it or something similar I can see it referenced quite a few times if I create a verbose log file when I launch the MSI

I was having the same problem on my laptop where Jabber has been updated multiple times as newer versions got released. Started getting this error around the 11.5 release. What I did to resolve it is:

I am experiencing the same problem while deploying to Windows machines. (serviceframwork.dll error)
Uninstalling the program does not actually remove any files from c:\Program files. The problem persists until you manually delete files.

I am also getting a similar problem while pushing Jabber 11.5 out to MAC end users.

Thanks. I uninstalled 11.5 and installed 11.5.1 and so far have had no problems. HOWEVER, another coworker ran the installer without uninstalling 11.5 first and ran into multiple issues. He ended up having to clean his computer of any reference to jabber on the hard drive and registry and reinstall 11.5. Don't know if you should be able to update without uninstalling or not, just an FYI. Don't try installing 11.5.1 over 11.5!

I have recently received an error message that starts out with "The Procedure entry point XXX Could not be located in the dynamic Link Library" and then I get an Error 7 (Windows error 127). iTunes will not start. I have uninstalled all Apple programs and then re-installed them. Still no luck. I am running Windows 8.1. I have tried systen restore too but with no luck.

There are several different scenarios that could lead up to the error, but typically it arises because an older version of the .dll has been copied into the wrong folder to workaround a different problem, and now after updating iTunes the outdated .dll that gets called cannot handle the request made of it.

The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.

It doesn't say what kind of error this is. I've tried installing individually the Apple Application Support and Apple Mobile Device Support items individually, as was suggested elsewhere for a similar error, but with no luck. iTunes still won't open.

Such errors may be fixed by deleting the named file and then repairing the component it belongs to, in this case iTunes itself. If that doesn't work run through the steps in the second box of the user tip.

I created a small Crystal Report Viewer using VS 2008 and Crystal 2008. If i run report with parameter prompt I am receiving the following error "The specified procedure could not be found. (Exception from HRESULT: 0x8007007F)". If I run report without pparameter prompt the reports display fine. This error only occurs on some computer only. I did some troubleshooting and found that "C:\Program Files\Business Objects\Common\4.0\managed" folder is empty, should this folder contains files like 'CrystalDecisions.CrystalReports.Engine"?

Before you give up on that report, open it up in the CR designer. Go to the File menu and select Report Options. Find "Verify on First Refresh" and "Verify Stored Procedure on First Refresh". Place a check mark in both, refresh the report and save it. Now try it in the app.

Googling the exception, it looks like it is related to a DLL not getting loaded. So it may be that the good report loads the dll (what ever that is), then the bad report can use it. So, let's see if that is a possibility. Download the modules utility from here:

Just before you send me the link with the module app, I decided to eliminate parts of the report that I think would cause the problem (the parameter prompt, database connections etc). I finally found that I had about 8 SQL fields outside the page area (on the blue part), once I remove these fields the report seems to work without no error. Orginally I was trying to design this report on a 8.5 X 14 and then I reduce to 8.5 x 11.

I just updated the IDE to 2.2.0. Runs fine on my Windows 10 box, but Windows 7 gives me a "the procedure entry point getpackagefamilyname could not be located in the dynamic link library kernel32.dll".

You will now find that Arduino IDE periodically shows an "Update Available" dialog to offer you an update to the newer version of Arduino IDE. You must not accept these updates since the newer versions are not compatible with the vintage Windows versions.

The "Update Available" dialog contains a "SKIP VERSION" button. If you click that button, Arduino IDE will no longer show the dialog for the specific newer version being offered at the time you click the button.

The dialog will appear once again each time Arduino releases a new version of Arduino IDE, so you will need to click the button again after each release. That is slightly inconvenient, but the release cycle is fairly long so I don't think it will be very burdensome.

It is possible to completely disable the offers of updates in the Arduino IDE advanced settings. The downside is this setting also disables offers of updates for your installed boards platforms and libraries.

If you chose this method, make sure to periodically check to see if newer versions of your installed boards platforms and libraries are available. You can do this by opening Boards Manager and then setting the "Type" menu to "Updatable", then repeating the process with Library Manager.

If it is tunneling credentials, chances are a user ( or some users ) are using another authorization level than the rest, and may have a differende default schema. If that schema doesn't have the supposed sproc, you will get that error.

What I mean is if i created a new user "webdev" that had a default database of 'master', but access to 'SandBox', sometimes after connecting to 'SandBox', the context somehow jumps to the default 'master', and objects cannot be found.

Lowell--help us help you! If you post a question, make sure you include a CREATE TABLE... statement and INSERT INTO... statement into that table to give the volunteers here representative data. with your description of the problem, we can provide a tested, verifiable solution to your question! asking the question the right way gets you a tested answer the fastest way possible!

It was a bit tricky to find because the database access layer class uses static methods with a static connectionstring. At one location in the code the connectionstring was changed and then reset to original connectionstring but during this time the entire application was connecting to the wrong database.

Could not find stored procedure 'Validate_User_Token'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior) at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) at Xavient.ProductSuite.DBHelper.DataAccess.ExecuteReader(CommandType commandType, String commandText, IDataParameter[] commandParameters)