Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Tpw 03 Pc Link Software Download
14 views
Skip to first unread message
Ling Baus
Nov 27, 2023, 9:49:03 AM11/27/23
to
How to Download and Use TPW 03 PC Link Software
TPW 03 PC Link is a software that allows you to program and monitor the WEG TPW 03 programmable logic controller (PLC). With this software, you can create ladder logic programs, configure parameters, view variables, and perform diagnostics on the PLC. In this article, we will show you how to download and use TPW 03 PC Link software.
How to Download TPW 03 PC Link Software
To download TPW 03 PC Link software, you need to visit the WEG website[^1^] and search for "WEG-software-de-programacao-do-controlador-tpw-03-pclink-2.1-software-english.zip". This is the latest version of the software as of April 2023. Alternatively, you can use this direct link[^2^] to download the software.
tpw 03 pc link software download
Download File https://t.co/5otRH8Hm8I
Once you have downloaded the zip file, you need to extract it to a folder on your computer. Then, you need to run the setup.exe file and follow the instructions to install the software. You may need to restart your computer after the installation is complete.
How to Use TPW 03 PC Link Software
To use TPW 03 PC Link software, you need to connect your computer to the PLC using a serial cable or a USB converter. You also need to set the communication parameters on both the PLC and the software to match. The default parameters are:
Baud rate: 9600 bps
Data bits: 8
Parity: None
Stop bits: 1
Once you have established the connection, you can open the TPW 03 PC Link software and select the "Online" mode. This will allow you to access the PLC functions and data. You can use the toolbar buttons or the menu options to perform various tasks, such as:
Create or open a ladder logic program
Download or upload a program to or from the PLC
Edit or verify a program
Monitor or modify variables
View or clear errors
Configure parameters or passwords
Perform diagnostics or tests
You can also use the "Offline" mode to create or edit a program without connecting to the PLC. However, you will not be able to test or debug your program until you go online.
Conclusion
TPW 03 PC Link is a useful software for programming and monitoring the WEG TPW 03 PLC. It has a user-friendly interface and a variety of features that make it easy to create and modify ladder logic programs. To download and use TPW 03 PC Link software, you need to visit the WEG website[^1^] and follow the steps described in this article.
Example of a Ladder Logic Program
To illustrate how to create a ladder logic program using TPW 03 PC Link software, we will use a simple example of a traffic light controller. The program will control three outputs (red, yellow, and green lights) based on two inputs (a timer and a button). The logic is as follows:
When the timer is ON, the green light is ON and the other lights are OFF.
When the timer is OFF and the button is pressed, the yellow light is ON for 3 seconds and then the red light is ON for 10 seconds.
When the timer is OFF and the button is not pressed, the red light is ON and the other lights are OFF.
To create this program, we need to use the following elements:
A timer (T1) with a preset value of 10 seconds and an output contact (T1).
A button (I1) with a normally open contact (I1).
A red light (Q1) with a coil (Q1).
A yellow light (Q2) with a coil (Q2).
A green light (Q3) with a coil (Q3).
The ladder logic diagram for this program is shown below:
```
|----[ T1 ]-----------------( Q3 )----|
| |
|----[/ T1 ]--[ I1 ]--------( Q2 )----|
| |
|----[/ T1 ]--[ TON T1 3 ]--( Q2 )----|
| |
|----[/ T1 ]-----------------( Q1 )----|
```
To enter this program in TPW 03 PC Link software, we need to follow these steps:
Open the software and select "Offline" mode.
Select "File" and then "New" to create a new program.
Select "Edit" and then "Insert Network" to add a new network.
Select "Edit" and then "Insert Element" to add an element to the network.
Select "Timer" from the element list and enter "T1" as the name and "10" as the preset value.
Select "OK" to add the timer element to the network.
Select "Edit" and then "Insert Element" to add another element to the network.
Select "Output Coil" from the element list and enter "Q3" as the name.
Select "OK" to add the output coil element to the network.
Select "Edit" and then "Connect Elements" to connect the timer element to the output coil element.
Select "Edit" and then "Insert Network" to add another network.
Repeat steps 4 to 10 to add and connect the following elements: normally open contact I1, output coil Q2, normally closed contact T1, timer on delay TON T1 3, output coil Q2, normally closed contact T1, output coil Q1.
Select "File" and then "Save As" to save the program with a name of your choice.
To test or download this program to the PLC, you need to connect your computer to the PLC using a serial cable or a USB converter and select "Online" mode. Then, you can use the toolbar buttons or the menu options to perform various tasks, such as:
Verify or debug your program
Download or upload your program to or from the PLC
Monitor or modify variables
View or clear errors
Advantages of Using TPW 03 PLC
The TPW 03 PLC is a compact and versatile device that can be used for various industrial applications. Some of the advantages of using TPW 03 PLC are:
It has a built-in LCD display and keypad that allow easy programming and monitoring without a computer.
It has 16 digital inputs and 8 digital outputs that can be configured as counters, timers, or PWM signals.
It has two analog inputs and one analog output that can be used for measuring or controlling voltage or current signals.
It has two serial communication ports that support Modbus RTU protocol and can be connected to other devices such as
35727fac0c
TPW 03 PC Link is a software that allows you to program and monitor the WEG TPW 03 programmable logic controller (PLC). With this software, you can create ladder logic programs, configure parameters, view variables, and perform diagnostics on the PLC. In this article, we will show you how to download and use TPW 03 PC Link software.
How to Download TPW 03 PC Link Software
To download TPW 03 PC Link software, you need to visit the WEG website[^1^] and search for "WEG-software-de-programacao-do-controlador-tpw-03-pclink-2.1-software-english.zip". This is the latest version of the software as of April 2023. Alternatively, you can use this direct link[^2^] to download the software.
tpw 03 pc link software download
Download File https://t.co/5otRH8Hm8I
Once you have downloaded the zip file, you need to extract it to a folder on your computer. Then, you need to run the setup.exe file and follow the instructions to install the software. You may need to restart your computer after the installation is complete.
How to Use TPW 03 PC Link Software
To use TPW 03 PC Link software, you need to connect your computer to the PLC using a serial cable or a USB converter. You also need to set the communication parameters on both the PLC and the software to match. The default parameters are:
Baud rate: 9600 bps
Data bits: 8
Parity: None
Stop bits: 1
Once you have established the connection, you can open the TPW 03 PC Link software and select the "Online" mode. This will allow you to access the PLC functions and data. You can use the toolbar buttons or the menu options to perform various tasks, such as:
Create or open a ladder logic program
Download or upload a program to or from the PLC
Edit or verify a program
Monitor or modify variables
View or clear errors
Configure parameters or passwords
Perform diagnostics or tests
You can also use the "Offline" mode to create or edit a program without connecting to the PLC. However, you will not be able to test or debug your program until you go online.
Conclusion
TPW 03 PC Link is a useful software for programming and monitoring the WEG TPW 03 PLC. It has a user-friendly interface and a variety of features that make it easy to create and modify ladder logic programs. To download and use TPW 03 PC Link software, you need to visit the WEG website[^1^] and follow the steps described in this article.
Example of a Ladder Logic Program
To illustrate how to create a ladder logic program using TPW 03 PC Link software, we will use a simple example of a traffic light controller. The program will control three outputs (red, yellow, and green lights) based on two inputs (a timer and a button). The logic is as follows:
When the timer is ON, the green light is ON and the other lights are OFF.
When the timer is OFF and the button is pressed, the yellow light is ON for 3 seconds and then the red light is ON for 10 seconds.
When the timer is OFF and the button is not pressed, the red light is ON and the other lights are OFF.
To create this program, we need to use the following elements:
A timer (T1) with a preset value of 10 seconds and an output contact (T1).
A button (I1) with a normally open contact (I1).
A red light (Q1) with a coil (Q1).
A yellow light (Q2) with a coil (Q2).
A green light (Q3) with a coil (Q3).
The ladder logic diagram for this program is shown below:
```
|----[ T1 ]-----------------( Q3 )----|
| |
|----[/ T1 ]--[ I1 ]--------( Q2 )----|
| |
|----[/ T1 ]--[ TON T1 3 ]--( Q2 )----|
| |
|----[/ T1 ]-----------------( Q1 )----|
```
To enter this program in TPW 03 PC Link software, we need to follow these steps:
Open the software and select "Offline" mode.
Select "File" and then "New" to create a new program.
Select "Edit" and then "Insert Network" to add a new network.
Select "Edit" and then "Insert Element" to add an element to the network.
Select "Timer" from the element list and enter "T1" as the name and "10" as the preset value.
Select "OK" to add the timer element to the network.
Select "Edit" and then "Insert Element" to add another element to the network.
Select "Output Coil" from the element list and enter "Q3" as the name.
Select "OK" to add the output coil element to the network.
Select "Edit" and then "Connect Elements" to connect the timer element to the output coil element.
Select "Edit" and then "Insert Network" to add another network.
Repeat steps 4 to 10 to add and connect the following elements: normally open contact I1, output coil Q2, normally closed contact T1, timer on delay TON T1 3, output coil Q2, normally closed contact T1, output coil Q1.
Select "File" and then "Save As" to save the program with a name of your choice.
To test or download this program to the PLC, you need to connect your computer to the PLC using a serial cable or a USB converter and select "Online" mode. Then, you can use the toolbar buttons or the menu options to perform various tasks, such as:
Verify or debug your program
Download or upload your program to or from the PLC
Monitor or modify variables
View or clear errors
Advantages of Using TPW 03 PLC
The TPW 03 PLC is a compact and versatile device that can be used for various industrial applications. Some of the advantages of using TPW 03 PLC are:
It has a built-in LCD display and keypad that allow easy programming and monitoring without a computer.
It has 16 digital inputs and 8 digital outputs that can be configured as counters, timers, or PWM signals.
It has two analog inputs and one analog output that can be used for measuring or controlling voltage or current signals.
It has two serial communication ports that support Modbus RTU protocol and can be connected to other devices such as
35727fac0c
0 new messages