Groups

HiPi Perl

Contact owners and managers

1–30 of 32

0 selected

Pilgrim Dust, … Mark Dootson4

3/28/24

GPIO XS not loaded

Apologies. There are issues in Version 0.91 recognising Raspberry Pi models A, B, A Plus, B Plus,

unread,

GPIO XS not loaded

Apologies. There are issues in Version 0.91 recognising Raspberry Pi models A, B, A Plus, B Plus,

3/28/24

12/5/23

Unable to get NeoPixel working

Hi folks - sorry for such a noobie question, but I have looked around and have not found a clear

unread,

Unable to get NeoPixel working

Hi folks - sorry for such a noobie question, but I have looked around and have not found a clear

12/5/23

11/10/23

HiPi version 0.90 released

Supports Raspberry Pi 5 Supports Debian 12 - Bookworm Refactored OpenThings / Energenie

unread,

HiPi version 0.90 released

Supports Raspberry Pi 5 Supports Debian 12 - Bookworm Refactored OpenThings / Energenie

11/10/23

Otter Koenig, James Lynes4

9/17/22

Errormessage in HiPi

Hej, thanks for answering. Time:HiRes is installed on the system. I use it time-measureing. I wasnt

unread,

Errormessage in HiPi

Hej, thanks for answering. Time:HiRes is installed on the system. I use it time-measureing. I wasnt

9/17/22

12/26/21

Pi4 64bit not recognized?

Hi. Thanks for providing this module! Unfortunately I cant get it to work on my newest Pi4. Running

unread,

Pi4 64bit not recognized?

Hi. Thanks for providing this module! Unfortunately I cant get it to work on my newest Pi4. Running

12/26/21

Clive Eisen, … Mark Dootson5

6/10/21

Falling at the first hurdle

Hi, I'd guess you have a V2 2.13 display. As noted in the Waveshare docs V2 uses a different

unread,

Falling at the first hurdle

Hi, I'd guess you have a V2 2.13 display. As noted in the Waveshare docs V2 uses a different

6/10/21

10/27/20

Other OLED Devices?

Mark: Any plans to support any other OLED displays? I see Adafruit has a new 128x128 1.5" Gray

unread,

Other OLED Devices?

Mark: Any plans to support any other OLED displays? I see Adafruit has a new 128x128 1.5" Gray

10/27/20

James Lynes, Mark Dootson4

8/29/20

0.96" OLED I2C Error

James, Thanks for this. I'll update the examples. On Sunday, 23 August 2020 at 03:40:29 UTC+1

unread,

0.96" OLED I2C Error

James, Thanks for this. I'll update the examples. On Sunday, 23 August 2020 at 03:40:29 UTC+1

8/29/20

James Lynes, Mark Dootson2

8/29/20

Hi, Setting up the driver is done via /boot/config.txt See https://github.com/raspberrypi/firmware/

unread,

Hi, Setting up the driver is done via /boot/config.txt See https://github.com/raspberrypi/firmware/

8/29/20

8/22/20

I had trouble finding these... Pololu has nice, cheap 2x20 connector shells in a 5 pack for about

unread,

I had trouble finding these... Pololu has nice, cheap 2x20 connector shells in a 5 pack for about

8/22/20

6/22/20

SOLUTION --------------- $SIG{INT} = \&trapcc # Trap CTRL-C Signal sub trapcc { $led1->value(

unread,

SOLUTION --------------- $SIG{INT} = \&trapcc # Trap CTRL-C Signal sub trapcc { $led1->value(

6/22/20

James Lynes, Mark Dootson4

6/22/20

Have now tested RPi::SysInfo along with HiPi in a test script that prints CPU and Memory utilization

unread,

Have now tested RPi::SysInfo along with HiPi in a test script that prints CPU and Memory utilization

6/22/20

6/14/20

HiPi Version 0.82 released

HiPi Version 0.82 released Updated Energenie and HopeRF69 interfaces allowing use of other RF69HW and

unread,

HiPi Version 0.82 released

HiPi Version 0.82 released Updated Energenie and HopeRF69 interfaces allowing use of other RF69HW and

6/14/20

Malcolm, Mark Dootson3

2/20/20

What does Interrupt SIGPIPE error mean?

Hi, Thanks for the suggestion. I think you're right. I've found a line in fhem where it says

unread,

What does Interrupt SIGPIPE error mean?

Hi, Thanks for the suggestion. I think you're right. I've found a line in fhem where it says

2/20/20

2/19/20

Interrupt SIGPIPE messages

Hi, I keep getting messages in my fhem log like this Interrupt SIGPIPE at /usr/local/lib/arm-linux-

unread,

Interrupt SIGPIPE messages

Hi, I keep getting messages in my fhem log like this Interrupt SIGPIPE at /usr/local/lib/arm-linux-

2/19/20

4/14/19

HiPi Version 0.75 Released

It's been a while. Version 0.75 of the HiPi modules has been released. In addition to some fixes

unread,

HiPi Version 0.75 Released

It's been a while. Version 0.75 of the HiPi modules has been released. In addition to some fixes

4/14/19

5/8/18

HiPi Modules 0.70 Released

I've been a bit quiet. However, the latest HiPi 0.70 has been released. http://raspberry.znix.com

unread,

HiPi Modules 0.70 Released

I've been a bit quiet. However, the latest HiPi 0.70 has been released. http://raspberry.znix.com

5/8/18

KlausG, … Mark Dootson3

9/24/17

Build of HiPi fails in test t/005-basic.t on Raspberry Pi 4.9.24-v7+

HiPi version 0.66 has been released. See http://raspberry.znix.com/ If you are using HiPi::BCM2835 or

unread,

Build of HiPi fails in test t/005-basic.t on Raspberry Pi 4.9.24-v7+

HiPi version 0.66 has been released. See http://raspberry.znix.com/ If you are using HiPi::BCM2835 or

9/24/17

3/6/16

HiPi modules version 0.35 released

HiPi modules version 0.35 has been released including support for Pi 3, Pi2, Pi B+, Pi A+, Pi Zero

unread,

HiPi modules version 0.35 released

HiPi modules version 0.35 has been released including support for Pi 3, Pi2, Pi B+, Pi A+, Pi Zero

3/6/16

3/28/15

Hello I have the same Problem like JohnDH I'm using a new RasPi 2 model B Uli Am Samstag, 21.

unread,

Hello I have the same Problem like JohnDH I'm using a new RasPi 2 model B Uli Am Samstag, 21.

3/28/15

3/20/15

hipi-install exit with "Failed with exit code 6400"

When running "perl hipi-install", I get the following error. Making all in doc Building XS

unread,

hipi-install exit with "Failed with exit code 6400"

When running "perl hipi-install", I get the following error. Making all in doc Building XS

3/20/15

2/16/15

Kernel Version 3.18.7 SPI MCP3008 doesn`t work

Hello everyone, When i want to use the lib with the MCP3008 Interface i become an lib Error with the

unread,

Kernel Version 3.18.7 SPI MCP3008 doesn`t work

Hello everyone, When i want to use the lib with the MCP3008 Interface i become an lib Error with the

2/16/15

1/8/14

bcm2835_init: Unable to open /dev/mem: operation not permitted

I am trying to use HiPi (http://raspberry.znix.com/) and FHEM (http://fhem.de/fhem.html, perl-based).

unread,

bcm2835_init: Unable to open /dev/mem: operation not permitted

I am trying to use HiPi (http://raspberry.znix.com/) and FHEM (http://fhem.de/fhem.html, perl-based).

1/8/14

1/8/14

Problems accessing /dev/mem

I am trying to use HiPi and FHEM (http://fhem.de/fhem.html, perl-based). I keep getting error

unread,

Problems accessing /dev/mem

I am trying to use HiPi and FHEM (http://fhem.de/fhem.html, perl-based). I keep getting error

1/8/14

10/17/13

PiFace HiPi::Wiring::digitalRead allways returns 0

Hi i use my raspberry with a PiFace. &HiPi::Wiring::digitalWrite($PIN,$VAL) does work fine but

unread,

PiFace HiPi::Wiring::digitalRead allways returns 0

Hi i use my raspberry with a PiFace. &HiPi::Wiring::digitalWrite($PIN,$VAL) does work fine but

10/17/13

Miralay DEVLET, Mark Dootson2

5/26/13

P5 I2C bus (second Bus)

Hi, You should be able to see the device if you have followed the following steps. 1. Soldered a

unread,

P5 I2C bus (second Bus)

Hi, You should be able to see the device if you have followed the following steps. 1. Soldered a

5/26/13

Barrie, Mark Dootson3

5/3/13

Timer interrupts

Thanks for your reply, Mark. It was the first scenario that I was referring to but the issue I saw

unread,

Timer interrupts

Thanks for your reply, Mark. It was the first scenario that I was referring to but the issue I saw

5/3/13

Barrie, Mark Dootson2

5/1/13

Thanks Barrie. Web page fixed. Regards Mark On 01/05/2013 11:32, Barrie wrote: > > Thought I

unread,

Thanks Barrie. Web page fixed. Regards Mark On 01/05/2013 11:32, Barrie wrote: > > Thought I

5/1/13

4/26/13

HiPi Interrupt Support

In response to Bill's prompting I have released a version of HiPi Perl modules with interrupt

unread,

HiPi Interrupt Support

In response to Bill's prompting I have released a version of HiPi Perl modules with interrupt

4/26/13

Bill Waggoner, Mark Dootson8

4/24/13

GPIO setting a value

Well, something's still not right and I don't know if it's my program or elsewhere. It

unread,

GPIO setting a value

Well, something's still not right and I don't know if it's my program or elsewhere. It

4/24/13

Search

Clear search

Close search

Google apps

Main menu