Zyxel Wifi Configuration

[Gerald Weiß]

unableto connect to zyxel router for wifi with Macbook. Put in WPA2 password but Macbook doesnt accept it and asks for WPA2 password. All other gadgets including ipad/iphone are connected to same router. Macnook pro 2012

Please read Writing an effective Apple Support Communities question. We are here to help. We are all users. We are not mind-readers nor clairvoyants. We only know what you write down and tell us. Be specific and thorough. Include your hardware information and installed version of macOS.

FYI: These are user-only forums. You are not speaking to Apple. if you need to speak with Apple Support, then contact product and tech support: Contacting Apple for support and service including international calling numbers.

I understand that the ACv2 is now replaced by the NWA1123ACV3. Can I purchase two of these, and link them with the ACv2 to form a wifi network with 3 APs and a single SSID? All APs would be hardwired back to the ISP router.

Absolutely, to enable roaming functionality, you simply need to configure the same SSID and security options for your AP SSID settings. This aspect isn't tied to the AP model itself but rather the network configuration.

Absolutely, you can purchase two NWA1123ACv2 units to extend your WiFi coverage. However, it's important to note that the NWA1123ACv2 has reached its End of Life (EOL) status. While it will continue to function, we advise considering our newer models like the NWA1123ACv3 or exploring our current offerings listed on Wireless Zyxel Networks for better performance and ongoing support.

For simplified management and monitoring, I highly recommend utilizing Nebula Cloud. With Nebula CC, you can centrally manage all your access points from a single platform, facilitating seamless configuration and maintenance across your network.

Hello community. I'm trying in vain to get into standalone mode for the initial setup. I don't need NCC. I'm using a 5G modem from ZTE in bridge mode and the AP is connected behind it. The Zyxel WiFi with the 4 digits of the MAC address is displayed. However, it doesn't allow a connection. Connection via Ethernet is possible. However, I don't know the internal IP address for the standalone configuration and or setup.zyxel.com don't work. The AP keeps flashing green/orange (continuously). How do I get to the setup page or to the IP address of the AP? Thank you for your advice.

Based on your description, it appears that your NWA130BE access point has obtained an IP address from the ZTE's DHCP server. To know the NWA130BE's IP, you can utilize the Zyxel ZON tool to scan for it. Note that the IP address of the laptop and the NWA130BE must be on the same subnet.

3a8082e126