Autodesk Autocad 2020 Serial Number Free

[Gerald Weiß]

HiI'm setting up a template with a sheetset so we can use it for several projects.

Sometimes i don't fill up all the informations cause the info's are pending.

But by default autocad show's number signs when the field is empty in hte sheetset.

I'm not sure if it would work in your case, but what I do here is to put a space in the location the field is grabbing info from, then the space gets replaced with the real data later on. I dont use sheet sets, so I'm not sure if it acts the same as DWGPROPS

If you are capturing a Custom Property and set that Value to blank then you will end up with hyphens instead of an X. If you put in a space, then it will show up as blank in the field until a different value is put in.

Curiously, i've puted blank spaces in the sheetset custom fields and it still gives me "-----"

It's a bit annoying i'm trying to build a template for the company where i am and try to cover all the fields possible

Has anyone actually used a blank space and it worked ?

Can either or both of you post or send (pat.m...@autodesk.com) a project that I can try this on? Include the steps to reproduce what you are seeing and what catalog is no longer being used but showing up in the list.

In my current project, I'm not seeing this issue. The last project, which is when I experienced this, was a disastrous mess. There were blown deadlines all over the place and we were in a rush. I know some things weren't done right. So at the moment, I'm inclined to think it's a workflow issue. However, I will go ahead and send you both that project and my current one so that you have a basis for comparison.

I took a look at the various projects sent. I did see duplicate item numbers for different catalog values. But once I ran the Item Resequence this was resolved. There were no item numbers used for different catalog values.

Sorry to revive this old post but I am currently having this same issue with ACADE 2017. I believe that Dennis is correct because I am experiencing this problem when I bring in new drawings. The new drawings were created within the same project but there are duplicate components due to the fact that the drawings are different versions of each other (customer can't make up their mind on an enclosure layout).

When I run the number re-sequencing function the issue is resolved in terms of the bill of materials but not for layout balloons. For example, a balloon from a terminal will have two item numbers attached even though the catalog check displays only one number and one catalog entry.

3a8082e126