How much tape for 6' hexayurt with camp danger hinges?

92 views
Skip to first unread message

maswasabi

unread,
Jul 22, 2013, 9:13:53 PM7/22/13
to hexa...@googlegroups.com
Hello hexayurt people -

I'm making my first hexayurt. I've decided on the 6'. I'd like to make it with camp danger hinges. I see that the regular instructions for the 6' takes 2 rolls of 3" wide tape. That 3" tape is better for this size of yurt. 

For camp danger hinges, the camp danger page says I will still use the same amount of tape. So, my question is, were they expecting I would be using 6 inch tape for the hinges and 3 inch tape for the edges? How many rolls would I order of each width of tape? And, a separate question, would one roll do it for the foil tape?

Thanks for your advice. 

April (I need a playa name)

Brent Williams Bright

unread,
Jul 24, 2013, 12:51:02 PM7/24/13
to hexa...@googlegroups.com
Hi  I ordered 3 rolls of 6" & 3 rolls of 3" foil from GoodBuyGuys.com took 1 week to ship.  I am building 6' hexy & this should cover it & the extra tape for tarp. It was 141.75 with shipping.  I was going to use 1&1/2" R-Max but Camp Danger has used 1" so I will too.   6" tape for hinges & 3" tape for edges & to tape over exposed 6" is what I understand from videos.  Good luck with your hexy! 

April Frederick

unread,
Jul 24, 2013, 4:39:03 PM7/24/13
to hexa...@googlegroups.com
Thanks Brent! Did you also use 6 inch tape for the edges? Or did you split your 6 inch tape?

Thanks,

April 

Sent from my iPhone
--
You received this message because you are subscribed to a topic in the Google Groups "hexayurt" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/hexayurt/RH2zwElpq5A/unsubscribe.
To unsubscribe from this group and all its topics, send an email to hexayurt+u...@googlegroups.com.
To post to this group, send email to hexa...@googlegroups.com.
Visit this group at http://groups.google.com/group/hexayurt.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

Brent Williams

unread,
Jul 30, 2013, 2:00:16 PM7/30/13
to hexa...@googlegroups.com
Hey April,   I used 3" foil tape for most of the edges but needed more than three rolls & I got 2" foil & it seemed to work out just fine .  I now have all 15 sheets foil edged & am ready to cut the diagonals. 
Reply all
Reply to author
Forward
0 new messages