Re: [GitHub] Tests [hpfem/hermes GH-234]

[Pavel Solin]

Hello Zhonghua,
thank you very much for this! I run the tests and the following
ones fail (there must be some problem because these examples
are supposed to work fine):

13/32 Test #13: example-homogeneous_line ....................***Failed
11.93 sec
17/32 Test #17: example-laplace_bc_newton2
..................***Exception: SegFault 0.40 sec
18/32 Test #18: example-neutronics ..........................***Failed
0.48 sec
19/32 Test #19: example-system_car_model ....................***Failed
0.37 sec
21/32 Test #21: example-system_exp ..........................***Failed
0.39 sec
22/32 Test #22: example-system_neutronics_eigenvalue ........***Failed
0.42 sec
23/32 Test #23: example-system_neutronics_fixedsrc ..........***Failed
0.40 sec
24/32 Test #24: example-system_neutronics_fixedsrc2 .........***Failed
0.45 sec

Pavel

On Wed, Dec 1, 2010 at 7:30 AM, GitHub <nor...@github.com> wrote:
> Zhonghua wants someone to pull from Zhonghua:tests:
>
> Adding tests for H1D.
>
> Zhonghua
>
>
>
> View Pull Request: https://github.com/hpfem/hermes/pull/234
>

--
Pavel Solin
University of Nevada, Reno
Home page: http://hpfem.org/~pavel
FEMTEC 2011: http://hpfem.org/events/femtec-2011/
Hermes: http://hpfem.org/
FEMhub: http://femhub.org/

[Zhonghua Ma]

Hi,

On Thu, Dec 2, 2010 at 4:28 AM, Pavel Solin <so...@unr.edu> wrote:

Hello Zhonghua,
 thank you very much for this! I run the tests and the following
ones fail (there must be some problem because these examples
are supposed to work fine):

I don't think so. For example, you can try example neutronics(not the test), you will see

 

E Newton method did not converge.

 

Zhonghua

[Pavel Solin]

On Wed, Dec 1, 2010 at 10:46 PM, Zhonghua Ma <mazhon...@gmail.com> wrote:
> Hi,
>
> On Thu, Dec 2, 2010 at 4:28 AM, Pavel Solin <so...@unr.edu> wrote:
>>
>> Hello Zhonghua,
>>  thank you very much for this! I run the tests and the following
>> ones fail (there must be some problem because these examples
>> are supposed to work fine):
>
> I don't think so. For example, you can try example neutronics(not the test),
> you will see
>
> E Newton method did not converge.

Well, then this is a bug in the example that needs to be fixed.
It has worked before. Thanks for discovering this.

Pavel