hardware_timer/timer.c.obj [build] [27/79 25% :: 3.786] Building C object CMakeFiles/main.dir/C_/Program_Files/Raspberry_Pi/Pico_SDK_v1.5.1/pico-sdk/src/common/

FPGA gateware watchdog timer >>> time out. (Question: What is this minimum rate ?) >>> Both the transmit and receive data packets of 1032 bytes contain a 4 >>

out the watchdog timer but think that the DLL I am using has > that taken care of. > > 73 > Cliff VK2NP > > On Saturday, August 12, 2023 at 2:50:30 PM UTC+10 softerh...

disable the watchdog timer immediately (no need to ever send TX packets) by setting the bit in the Metis start packet. I think this is what CW skimmer does. The openhpsdr radios always

disables the watchdog so you do not need to worry about sending packets to the HL2. It is based on hermeslite.py, a Python library which I use for all command line testing: https://github

off the watchdog timer and found it more reliable for two days, >> then returning to its intermittent freezing in the SparkSDR. A few on-off >> cycle of SparkSDR will bring

> Such watchdog is in the HL2 firmware, but it doesn't resolve this type > of problems, because it's the quisk which is sending the packets and > the > ethernet connection

the > watchdog timer in SparkSDR help? Even during TX, the unit is > allowed to reach 55C before shutting TX off. > > The heat sinks included from Makerfabs are standard Raspberry

using the watchdog timer. > > The version should switch to 72 and patch to 8, but the version remains at > 70, so I'm blocked for futher operations. > > Alan M0NN says

as a watchdog timer will not be renewed. If not, then it may indicate a hardware issue. How high is the temperature? TX is disabled when the temperature reaches 55C. There is a TX inhibit

is a watchdog counter in the HL2 and it must receive packets to stay in TX, so something is still sending packets. I think you said you are using SDRConsole on Windows? Can you open up task

disable > watchdog. > > Mike was it with a circrx (hermeslite.rbf) renamed to > hl2b5up_main.rbf as proposed in the M1GEO a article? > > I am running latest updates

than the watchdog, I have never >>>>>> actually tested that the disable watchdog feature in recent versions of >>>>>> Spark actually works

disable the watchdog timer so should work. The latest stable gateware release is recommended: https://github.com/softerhardware/Hermes-Lite2/tree/master/gateware/bitfiles

reset the watchdog timer), you >>> will have to either update CW skimmer to send a filter setting which >>> activates the HPF, or you may be able to get by using hermeslite

on disabling watchdog timer in that >> variant, and also see if we can reduce to 10 192kHz receivers for skimming. >> > >> > 73, >> > >> >

of the watchdog timer, I do send data >> > continuously. Can you see any downside to always >> > engaging the HPF for frequencies higher than 3 >> > MHz? If

3. Watchdog timer control address 0x39 "Misc Commands": Command 0x09 disables the watchdog timer, 0x08 enables it. Finished 4. Reset on disconnect address 0x3a bit [0

of the watchdog timer. The >> watchdog may have been problematic when using CW skimmer. I don't have a >> Windows setup, but if someone wants to try: >> >>

off the watchdog timer to make this easier. I will share results once >> I have some. >> >> 73, >> >> Steve >> kf7o >> >> >>

and the watchdog timer was kicking in on the HL2 and stopping sending > packets. It would be moderately easy to modify the HL2 skimmer dll to cope > with this, but I don't have

PTT Timeout Timer? > > Hi Steve, > > I've heard a fellow ham talking so long on the air that his transceiver > PTT timer timed out on him multiple times while in a long

is a watchdog timer in the HL2 that is > reset to zero whenever it receives a packet from the host. If the watchdog > counter overflows, then the HL2 disconnects and stops running

disable the watchdog timer? > > > > For some of the experiments I did the HL2 stopped transmitting if the > > watchdog timer was running. I don't remember the exact

for the watchdog). What alerted me, was a 'snick' in my headset earpiece just a fraction after starting to Tx (same every time I tried) both on VOX or clicking PTT on screen. I

, HL2 watchdog it is! i had been working only with my own sensory apparatus, and it seemed the UDP stream stopped promptly upon closing the second RX. i don't suspect HL2 is doing anything

. The watchdog counter is only incremented when a bandscope dump is or would be sent upstream. This is sent at a constant rate and independent of the number of receivers. The control now

to the watchdog timer which was >> added to the FW some time ago because I actually get a short burst of audio >> at the beginning before it stops (didn't notice this before

. The watchdog timer is not related to queue underflow/overflow management. There have been times when software crashes or is disconnected without ever telling the HL to stop sending

add a watchdog timer to prevent sending to some address without > appropriate return packets from that address. I will have to try with my > wifi to see if I can get it to send packets