asking about Thetis. I don't run Windows here and have used Thetis in a while so can't help with that software. Quisk and Sparksdr both work on Windows as well as Linux. While

fix. Thetis v2.10.3.12 - Release A highlight video for this release is available here : WATCH HERE This version has been built with Visual Studio 2026 and includes a vc145 c++/c redistribution

all my Thetis settings, created a new default database, and then manually re-entered all settings from the screenshots. After doing this, the TX power indication is back to normal

external inline meter also shows reasonable power, so it really seems to be just the Thetis TX meter indication that is incorrect. Mike: I can confirm that I am indeed using the *MI0BOT

HL2 running Thetis software for 10 months. One day I turned it on and hit the pedal to key the mic and I heard a squeal. I took my foot off the pedal and tried again, same thing. Left it alone

-1000ProII Meter protocol. Now i have the 600Pro 2 tuner and it seems to work well except that the power level feedback is always high but no big worries there. Im posting this to see if

think my power supply is kaput... It was good then for 100W on the FTDX10 which it blew my FTDX10 finals (the HL2 + amp is its replacement). I have a 12V battery plugged it in and voila it runs

with low power output, it seems to be the VPa, VOp and VBias being low voltage. Band Measured Reported on Thetis 10m 0.5W 1W 12m 1W 2W 15m 0.5W 1W 17m 0.6W 1W 20m 0.5W 1W 30m 0.6W 1W 40m 0.6W

floor per Thetis of -60 to -80 at my rural home. Couldn't track the noise more accurately than in the field across from my house, so I built the box while waiting (1 day) for the utility

the watt meter. Power out for 3 seconds and nothing for 3 seconds then repeat. HOWEVER, if I click TUNE, the tone comes on and the radio transmits for as long as TUNE is selected. Same thing

no transmit power > > > > Continuing here; > > I appear to be running the same version of HL and HL2 (both P1) on two > systems here, both running same version of Windows

x or Thetis. I would be interested if you >>> do track it down. >>> >>> Cheers >>> >>> Reid >>> Gi8TME/Mi0BOT >>>

the output meter, no RF on my > Telepost LP-100A. A relay does click, and the transmit light does come on. > > The second RF connector on the back gives 8V peak-to-peak on my Rigol

setting on Thetis. Before when I engage PTT and talk the watt meter on RS-928(juma clone) would move with my voice as I would expect from SSB. Now it does not it, power stays up regardless

fork of Thetis. If you have an HL2 and HR50+, please test this and let me >>>> know if it works for you. I hope this benefits others. >>>> >>>> 73

that the Thetis PTT is now working correctly. > > AutoHotKey V2 has a "somewhat" different syntax from AHK V1!! > Once I have a .AHK script working, then I "

that the power to my house had gone out > yesterday. I am thinking that maybe it was not a coincidence. I had been > powering the HL2 with a Rigol bench top power supply so i would think

. The power the amp puts out on tune will depend on the impedance the amp sees when tuning starts. With the same drive the amp will put out much more power to an initial low impedance. So at

and REV power values to > the Hermes ADC. Upon inspection, I found the problem was related to *D2 > (BAS40-07)*. Replacing diodes component resolved the issue. > > I hope

(eg Thetis) and > build this in (if it is not yet there). > > > > > > Am 08.02.2025 um 16:15 schrieb Lukasz Olszewski < > em...@lukaszolszewski.info>

6W of power in CW >> mode. >> Reinserted the board in the case, again HF was stopped (now board is >> clean!) >> After that I've repositionated the heat

glitches between Thetis and the python script. The script itself and the firmware do what they should in principle. It was reported above by others that the error shows in Thetis but

the 11 meter band. The HLA-305V does meet FCC certification and also has LPF with auto band switching. An RCA plug coax cable from the HL2 to the amp is all that is needed to control PTT on

… no power…. We have made also measurement on the DAC pin 51 and 52 with oscillo and there is nothing … What did you suggest? Reprogramming the fpga? Please provide us all bitfiles factory

. After power, the PS-A icon was activated. Note that the ps-a line remains dim green and does not read any signal. Even the indicators in the PS-A settings menu do not have any response

PA in Thetis and set the >> power output to an appropriate level. Then the MOX button will enable >> transmit but you won't see anything in the meter unless you say something

mentioned your meter was not calibrated. It feels like the meter may > be switching from a lower power mode to a higher power mode right in the > range you want to measure. Do you have

HL2 of Thetis for HL2. https://github.com/mi0bot/OpenHPSDR-Thetis/releases/tag/v2.10.3.5-beta5 - Added missing label for auto attenuator - Corrected reverse power calculation

HL2 of Thetis for HL2. https://github.com/mi0bot/OpenHPSDR-Thetis/releases/tag/v2.10.3.5-beta4 - Updates from official repo - Fixed custom display showing all lines at startup

shows no power out and I did turn PA on. One thing that was > interesting was when I key up in AM , the fwd and rev power stay at 0, the > swr goes to 1.0, the temp raises slowly, and the ma