try the factory reset (short tip to ring of the CW/PTT connector during power on), are you able to find your HL2 and does it have the same 192.168.1.180 address? It may be that your HL2 has

Using the factory boot mode sdr console found the hermes. clicked on favor dhcp . Now it works again on my win10 and my win 11 pc's I still don't understand why I couldn't do

Try this. Also try check /MCLR Il giorno mercoledì 11 giugno 2025 alle 00:42:37 UTC+1 Owen Adair ha scritto: > Yeah - I think you are onto something

using the factory reset to make it work again? This is possibly a misconfigured static IP or MAC address change. I would look at those in the wiki and see if you can make changes to have it

booting in factory reset mode make any difference? Short all 3 connections of the CW/EXT PTT before and while powering on the unit. https://groups.google.com/g/hermes-lite/search

tried a factory reset, shorting TRS on the mic socket, but still the same >>>>> issue. Any ideas where to go next? >>>>> >>>>> 73,

the Force Factory Image Reboot as outlined in the > Wiki. Result: both HL2's showed no change after performing this. It was > clear that some form of reset occured as IP &

Please try factory recovery boot as described here: https://github.com/softerhardware/Hermes-Lite2/wiki/Troubleshoot-Network#temporarily-recovering-from-an-unwanted

boot in factory recovery mode (tip shorted >>> to ring during power on) and check these settings in SparkSDR, Quisk or the >>> Python scripts. >>> >

Boot the factory image and then check with SparkSDR to make sure you didn't accidentally specify a fixed IP or turn off favor dhcp. Also, did you remove power and do a cold reboot after

nor on factory > recovery mode. > Still no luck. > > Le lundi 2 octobre 2023 à 16:56:12 UTC+7, Grégory Salaun a écrit : > >> Tanks Jiri for your input. >> I use

the firwmare reset by grounding PTT and CW at startup the DN2 > will blink 2HZ and the DN3 will blink at 1Hz. > > I have tried everything, directt connection to PC, change of cables

1] Reset the database did not fix it. Here is PiHPSDR discovering the correct IP and MAC. [https://groups.google.com/group/hermes-lite/attach/d74e2b693a48/image001.png?

1. Factory reset top GW70 2. Via Spark tried to install GW72, not successful. 3. Installed Quisk (Windows) 4. In Quisk firmware update to 72, successful 5. After that Quisk firmware

Thank you much sir I had been banging my head against a brick. Last several weeks of what is going on here. Most everyone called it an RF issue getting

to > RESET itself. > For that purposes I have a VNC onto the remote network and one of the > older MacBooks is running a ethernet wire and indeed I coud ping the > 169.254.xx

as a reset/recovery in future if needed. > > I agree it certainly > looks to be in a state of idleness. Awaiting a > run trigger. > > No mods > no updates as I wanted

I have reset, back to factory, the router. and rebooted all devices > still strange happenings. > I can see the failed HL2 in the devices list of the router at > 192.168.1.77

'll reset the Thetis database and see what > happens. > > Alan, sorry for treating the Spark spectrum display as "primitive". I like > the simplicity of

will auto reset to 0 after time or band > change. > > Ed > > On Sunday, March 26, 2023 at 1:07:35 PM UTC-4 piggy...@gmail.com wrote: > >> Hermes Lite 2 received

device to reset the device >>>> back to Factory gateware. No change after doing this troubleshooting >>>> step. >>>> >>>> I

to reinstall factory "out of box" firmware. If so what do I > need to do this?? > > On Friday, December 23, 2022 at 6:05:43 AM UTC-5 Steven St Germain wrote: > >

think the factory reset is resetting correctly? Please try the above experiment with normal and factory reset boot. Finally, can you try updating your gateware with Quisk or hermeslite

, have reset my router to factory, and >>>> have a 1000 MBPS network. >>>> Still no luck. >>>> Here are a few images of the board - I do see a bridge

the > reset after disconnect option. There is still others to find. > > Cheers > > Reid > Gi8TME/Mi0BOT > > On 13/05/2021 02:29, K7MDL wrote: > > >

force a factory reset to do), follow Steve's comment. That is, run SparkSDR, connect to the radio, then on the top right click the "..." buttons. Confirm there is no fixed

with the factory image and then clear any fixed IP with SparkSDR, Quisk or hermeslite.py. ** Network setup is challenging for some. Fortunately, someone just volunteered to help with

tried the reset without luck but didnt have much time to >> work on it. I am working on the assumption that a fixed ip was set in the >> factory? >> >> Will try again

? The factory boot should start at power up with the jack shorted just briefly. Are you certain you had to wait 5 seconds? Short the jack, apply power and release the short. The check for

HL2 in factory reset mode: > > https://github.com/softerhardware/Hermes-Lite2/wiki/Updating-Gateware#force-factory-image-boot > > If it connects via DHCP