have the AK4951 companion board on the way but I have read that some >>>> prefer not to use it. Not sure why. >>>> >>>> Anyway can someone point

>> ak4951 support were added. >>> 5. I don't know if/how/why the ak4951v4 variant does not shut down >>> when temperature exceeds 55C. I originally

used the AK4951 companion board. In my opinion, it is not worth it. People like it for two reasons: direct monitoring and integration. Regarding direct monitoring, there is no audio

need the ak4951 companion board. I operate QRP, as the HL2 was > designed to do, and only use the HL2, N2ADR filterboard and enclosure, all > from Makerfabs. > > 73, > >

Hi, when the parameter LRDATA set 2 at the file hermeslite_core.v, synthesized the sourcecode and after flash rfb-file to the hermes lite. Have no more

supports the AK4951 card as well. >> >> 73, >> >> Steve >> kf7o >> >> >> >> On Saturday, November 2, 2024 at 8:34:23 AM UTC

Dear Joel, see attached. Also watched ON7OFF on Toutube, great videos. Op dinsdag 29 oktober 2024 om 20:58:30 UTC+1 schreef Joel Caulkins: > Hi, I

Dear all, As Kurt is a very modest Ham operator I want to promote his excellent Thetis YouTube tutorials " from zero to hero" Tutorials .

that the AK4951 board provides zero audio latency for audio modes. This is incorrect. Users are confused because it, like other off-the-shelf soundcards, includes direct monitoring

Check the manual. WSJT-X and JTDX are similair. 73 Ronald PH7R Op vrijdag 6 september 2024 om 05:55:23 UTC+2 schreef Al Goodvibes (14DWT2901): >

Did you set the drive in Thetis? See very usefull manual. 73 PH7R Ronald Op donderdag 22 augustus 2024 om 11:46:15 UTC+2 schreef Ken Short: >

like the AK4951? It will engage transmit for me, but it isn't > passing my VAC audio. > > > > Thanks and 73, > > Luke - AE5AU > > > > -- > > You

Sorry this version which isn't reduced/ compressed may be easier to see of the screen shots Also, the latest version be available on the Hermes

board and AK4951 companion board. My system works as far as transmit and receive using space bar and up/down arrow key for activation. I am using the latest Thetis software. The issue

>> ak4951 is essentially an expensive ethernet sound card. >>>>>>>>>>>>>>> >>>>>>>>>

added the AK4951 companion board and their instructions are to > flash a new gateware file. Well, their file turns off DHCP and with no > static IP address the Hermes seems to go

The best place for help with the HL2+ board is this group: https://groups.io/g/HermesLite2Plus I think you can get the HL2+ gateware from there. Also,

we have AK4951 COMPANION BOARD which give HL2 direct link to mic and > phones. will HL2 run without SDR software(PC side)? only use SDR software > if you want to change the frequency

think the AK4951 add-on is necessary or worthwhile. There has been much discussion regarding this in the group: https://groups.google.com/g/hermes-lite/search?q=ak4951 73

Hi Steve, No problem, I know what it can be like when dead lines have to be met. I will be travelling in a couple of weeks and will be able to do some

WA2T HL2+ AK4951 V4.0 Companion Board > > > Software > > Thetis v2.10.3.4 x64 (01/07/24) (FW v7.4.2 Protocol 1) HL2-Beta3 (MIOBOT) > > Gateware - 74p2 - as linked

files for ak4951 variant to the HL2 git >> repository. Please understand that there are now two >> variants of ak4951 to accommodate two types of ak4951 boards. >>

Hi Nikos, I have a attached a document from Rick N8SDR, which goes though the install procedure and has info on setting up Thetis. Hope this helps.

It looks like you are not running the correct version of Thetis. I have a attached a document from Rick N8SDR, which goes though the install procedure

>> AK4951 companion card? >>>>>>>> >>>>>>>> Since you state you have tried WireShark, please post the WireShark >

, the AK4951 companion board does not bypass software. > All microphone audio is sent back to the host for processing > via software and then sent back again to the HL2 as IQ data

many the AK4951 is a bad subject. Wil the NEW I/O board work if one also has the dreaded AK4951 installed as well? I'm looking for a good way to control a new amplifier and the I/O board

HL2 with AK4951 companion >> card. Adding a plus to the hermes-lite name is a marketing gimic to try and >> make people think it is better (everyone knows an A+ is better than

using an ak4951 board. > > Get BlueMail for Android > On Aug 6, 2023, at 12:14 PM, "radi...@mail.com" wrote: > > Hi Ronald. Not at all sure what you mean by "

> The AK4951 companion card topic is a bit of a sore topic for me. There was > an acrimonious split several years ago. Search this list for "ak4951", > "audio