it appears T2 was dislodged possibly due to shipping/handling or final assembly. This would explain your RX deafness. See the attached picture for how a properly soldered T2 should

com/ T2 is an 8:1 in the rx circuit from rf1. T1 is 4:1 in the rf3 low power pa circuit. You show a 2016 version which seems to have the 8:1 as T1. I might think you are looking at an early version

see the BN43-2402 option on the schematic: http://hermeslite.com/ The circuit board footprint accommodates this larger T2. Some people remove T2 and replace with this BN43-2402

The additional cable should have no effect on the output signal. It does, however, damp the input signal by about 3 dB since the feedback is parallel

used for T2 on the HL; the graph below show the transformer response for > - BN43-2402 with 14 turns : 5 turns > - BN73-2402 with 14 turns : 5 turns > > - MACOM MABA-010143-FLUX18

T1 and T2. > > 73, > > Dani. > > El 29/01/17 a las 17:09, in3otd escribió: > > Hello, > > > > T3 (the output transformer) is specified as 4T primary

Hi All, The BOM generation scripts are working for PDFs. These scripts allow me to create custom BOMs for different build options, different suppliers,

Hi Steve, I build SDR G11 from Genesis and mchf by M0NKA. Filter from G11 use for LPF 6 relays with filters in series and mchf use another trick (I

Hello Group, I am finishing up a test PA for HL2. You can find the KiCad files as well as schematic (pa.pdf), bom (pabom.pdf), layout picture (pa.png)

OP2677 and T2 is BN-43-2402 with 4t of bifiliar 30 ga. I updated to the latest firmware Hermes_Lite_TxDAC_SDK_73.jic . I have an SDK board. I am supplying a well regulated 12 supply to

%. T2, 4t bi-filar on >> BN43-2402 core. 12V supply. >> >> Has anybody else tested this? I wasn't expecting low power on lower >> bands like this. >

T1/T2 core to a BN43-2403. Joe suggests we change all of the boards >> to that core, although it is not as significant on the higher >> frequencies. For the all band Megaband