to the HL2? >> >> https://apache-labs.com/product-detail/anan-10e-revised-hf-6m-sdr-transceiver-preorder >> >> Is it an IMD issue? >> >

you want 6m, buy a converter, if you want to have high > accurate Pure Signal, get yourself a good RF Sampler. > So, it does not make any sense to build a new Hermes lite radio. >

20M through 6M though I >>>>>>>>> know the Hermes only does to 10M. I also have an Icom IC-705 which I'd like >>>>>>>>

t cover 6M. > > The highest frequency I'm interested in is 30MHz. That's 29296.875 > crumpleHz. Which fits in a 16-bit variable, no problem. > > I *love* open

Xvtr bands 6M and higher. K7MDL2/HL2_IO_BOARD_BCD: BCD and PTT outputs for the HL2 IO board designed by N2ADR. VHF band focused, modify to suit your needs. Each SDR app handles the Aux

Hi Ed. I'm planning to set up a fully remote HL2 in the countyside QTH, so my next step is to buy an ATU+AMP and Hardock 50+ seems to be a good

HF/6m >> power amplifier with automatic band switching from www.60dbm.com. >> In the future, I am thinking of purchasing a kit with 4xMRF300 from DX >> WORLD-E

VHF bands 6M and higher to control transverters.  It is easy, you can modify the example I linked to how you need it.   I also force the Aux RF on for split IF.   K7MDL2/HL2_IO_BOARD_BCD: BCD

(at 6m, fed by >>> 35m od h155 coax, two chokes right before the shack) on most bands was >>> about -120dBm as shown in pihpsdr. >>> >>> However

work on 6m. >> >> Has anyone given thought to preparing this upgrade? >> >> (I am working on a new SDR design for VHF&UHF (30MHz-6GHz) using the >>

Hi Pibo, I'm using Thetis 2.10.3.7 (build HL2 from MI0BOT) and those settings are ticked correctly (so PA activated). I've also started again

high z 6m tall active > antenna (if there is interest I can share the rx amp design). I don't think > the ground system on the high z antenna is quite good enough yet, it is >

--6M-100W-Ultra-High-Performance-SDR.html >> >> On Wed, 13 Nov 2024, 05:44 Randy Best, wrote: >> >>> OK, OK, OK I have to ask. I love my HL2 and latest

job for 6M. I didn't want to > include support for 6M because it complicates and adds expense to the > frontend to switch RX filters and could introduce more noise. Instead

with a 6M transverter using split IF (low level TX out and Aux RF in), and an HF antenna on the ANT jack.  I switch between them through the SDR app, Thetis in this example.   Here is what I have

hf-6m-power-amplifier-for-yaesu-ft-817-icom-ic-703-705-elecraft-kx3-automatic-band-switching/ >>>>>>>>>>>> >>>

hf-6m-power-amplifier-for-yaesu-ft-817-icom-ic-703-705-elecraft-kx3-automatic-band-switching/ or the 50W version to be a better fit. On Thursday, May 23, 2024 at 12:18

continuously on 6M WSJT-X via a transverter, the other on and off the HF bands with the 10Rx HL2. No database reset from Beta 2 required so far.   From: herme...@googlegroups.com <

https://www.60dbm.com/product/100-watt-hf-6m-power-amplifier-for-yaesu-ft-817-icom-ic-703-705-elecraft-kx3-automatic-band-switching/ Regards Martin VK5MAR

hf-6m-power-amplifier-for-yaesu-ft-817-icom-ic-703-705-elecraft-kx3-automatic-band-switching/?fbclid=IwAR2MhKOMNwmwBcHHP7XDJxgm8X32JByIIA3caNa9yxQwfafRWfwE9dZrle8

PA gain i have all bands except 6m set to 100 percent > > is their anything else I can adjust to increase power out or is this about > normal for the transceiver? > > > >

Nope. The original document is the original protocol. In Yellow are my personal notes based on measurements with my ANAN-7000. BTW the original

hf-6m-power-amplifier-for-yaesu-ft-817-icom-ic-703-705-elecraft-kx3-auto/ > > On Wednesday, November 8, 2023 at 12:31:34 PM UTC-5 Max wrote: > >> https:

Hello Mike, Thank you for sharing your experience with the IO board with the group. It will help other users. I just have a couple comments. It should

HF and 6M coax lines. Gives me all >> bands 160M to 1296 with 1 or 2 radios. All the big coax is kept short >> that way, minimal cable clutter in the shack. >> >>

hf-6m-power-amplifier-for-yaesu-ft-817-icom-ic-703-705-elecraft-kx3-auto/ >> >> >> >> Eham review https://www.eham.net/reviews/view-product

10m, 6m (not applicable I know) is at 38.8 dB. I can manually >>>>>>>>>>>>>> set 39 dB, is that correct? >>>>>>

for the 6m band, here -93 dBm integrated power density should be S9, while it is -73 dBm below 30 MHz. > Am 28.07.2023 um 14:00 schrieb Pez : > > Thanks for that link Duncan. An interesting

transverters for 6m/4m/2m/70cm. >>>> They are my only transceivers currently in use (or likely to be, other than >>>> when I finally get to unpack my old

160-6m (latter > with transverter of course). > > Hope this gives you just another option. > > 73 > > Max > > On Monday, 12 June 2023 at 03:52:40 UTC+1 gadget