Complete Newby

[Chuck Marzahn]

Hi All,
So new I haven’t rec’d my HL2 yet…
A couple questions.
If I have this right, I ordered the main board, N2ADR and the enclosure. My FOMO might be kicking in. I think there’s an input board and a plus board. What might I hope to gain from either? Both?
I’d like to lean into pure signal going forward. I’m presuming there’s an amp on my horizon. Suggestion there are welcome. I understand that Thetis may not be the best option for pure signal. Is that true? What would be a better option?
Many thanks in advance!
Chuck

[Clifford Heath]

Have you read the Wiki? Or do you need someone to copy-paste it here?

Clifford Heath

--
You received this message because you are subscribed to the Google Groups "Hermes-Lite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/D17C6982-1D8E-4A3D-B54F-44184C680C25%40gmail.com.

[Mario Vano]

Clifford neglected one piece of information you'll require to follow his advice:

https://github.com/softerhardware/Hermes-Lite2/wiki

hope this helps!

[Steve Haynal]

Hi Chuck,

You can find most links on the main page:

http://hermeslite.com/

You can start with the wiki linked on that page. Also, this group is searchable via the web:

https://groups.google.com/g/hermes-lite

Many newbies like the Facebook hermes-lite page.

You don't need the ak4951 companion board. I operate QRP, as the HL2 was designed to do, and only use the HL2, N2ADR filterboard and enclosure, all from Makerfabs.

73,

Steve

kf7o

[Ron Lewkowicz]

The best implementation of pure signal will be in the DL1YCF fork version of PiHPSDR also DL1BZ offshoot deskHPSDR since it started from the PiHPSDR code base.