quisk and fldigi on Linux

[Juan omitawe]

I use quisk on linux debian 12, it works very well. I use it with wsjtx using hamlib localhost:4532 and using digiU mode, set quiskaudio.in output on output, and quiskaudio.out on input. With this configuration, if I alter the frequency in quisk it alters in wsjtx, and vice versa and the ptt works fine.
In fldigi, I can configure the cat with the same parameters, but it works by altering the frequency in quisk, it alters in fldigi, but not the other way around, the ptt does not work and I can configure the audio output with quiskaudio.in using pulse but not the input, Well, quiskaudio.in does not appear on Pulse devices, only the laptop microphone.
Has anyone managed to get fldigi working on Linux with Quisk? In this case, could you report the configuration you used? Thanks in advance.

[James Ahlstrom]

Please check the documentation for Quisk.  There is some information on working with fldigi.

Jim

N2ADR

[Michael Clemens]

Hi Juan,

I have exactly the same issue and I am not able to get fldigi working with Quisk. While I see Quisk's audio devices in wsjtx, they are not visible in fldigi.

73

Michael, DK1MI

[Michael Clemens]

Hi again,

today, after reading James' instruction carefully, I finally managed to get it all working. You can read my write-up here: https://dk1mi.radio/quisk-fldigi/

73

Michael, DK1MI

[James Ahlstrom]

Thanks for taking the time to make your write-up. I am sure it will be helpful to others.

Jim

N2ADR

[Juan omitawe]

Thanks, for me work fine i use the vox funtion for ptt