Schematics for printed circuit front/end plaque

[roch...@gmail.com]

Hi All

Received from MAKERFABS the front and rear plates. Error in dimensions.
MAKERFABS sends me good plates rapid response .

My question is, where to find schematics for printed circuit 2 plates.

Despite my research on the HERMES LITE documents, I did not find the
right description.

Thank you for your help

73  F1GZV , Roch

[Steve Haynal]

Hi Roch,

You can find the schematic and details for the rear IO end plate here:

https://github.com/softerhardware/Hermes-Lite2/tree/master/hardware/enclosure/endcaps/kf7o/hl2_40b

There are several optional IO expansions.

73,

Steve

kf7o

[Winston]

As a side note, I replaced the countersunk screws with panheads so it sits flush against the plates.

[Steve Haynal]

Hi Roch,

If you have the older endplates, you can find the schematic if you go batck to Nov 1, 2019:

https://github.com/softerhardware/Hermes-Lite2/tree/02bb411e26b9c4c4b1884375c8a5213543d5afc2/hardware/enclosure/endcaps/kf7o/releases/20190901

73,

Steve

kf7o