30 / 5 000 Raspberry Pi 4 via Ethernet port on PC

[Jatteau Marc]

Hello everyone.

I'm using my RadioBerry with a Raspberry Pi 4 on Thétis.
The connection is made via my internet router.
I saw that it was possible to connect the Raspberry Pi 4 directly to the PC's Ethernet port.
Could you tell me how to do this?
73 from Marc F6GKG

[Gary Abercrombie]

Raspberry PI Ethernet port can autosense so a straight thru cable should be fine.  Just connect to your PC and try to ping the raspberry pi.

I would recommend a pi 5 as it is significantly faster than a pi 4.

--
You received this message because you are subscribed to the Google Groups "Hermes-Lite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/258b7345-a9df-4564-a8ff-eb859cacc68an%40googlegroups.com.

[Jatteau Marc]

Hello Gary
Thanks for the response.
I will check if it is a straight or crossed cable and ok for the RPI-5
This will undoubtedly be one of my next purchases.
you will tell me if it is compatible with RadioBerry+Pihpsdr.
73

[Clifford Heath]

"autosense" means that either a straight-through or a cross-over cable should work.

Just thought that might have been lost in translation.

Clifford Heath

To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/e653712d-55ac-4b72-8f5f-b4fac27555e7n%40googlegroups.com.

[Jatteau Marc]

That's it, I found it online!
You just need to assign a static IP address to both the PC and the Raspberry Pi (the same one). Now I can use Thétis on the PC or, independently, RadioBerry in standalone mode.

73 from Marc F6gkg