Re: Frozen HL2

[Gerry mc laughlin]

switch it off then short between the centre pin of the key/PTT on front to the outer case then restart the hl2

On Thu, 28 May 2026, 03:28 Claude, <claude.p...@gmail.com> wrote:

Hello everyone,

My HL2 suddently stop working, it was perfectly working yesterday and today, when I try to power it up, only the CLK LED flashes and HW stay lit... usually HW flashes, then SPD flashes, then IP lit and then it is ready to connect to thetis, now it seems stuck.

Any ideas what I could check ? Nothing has changed.

I disconnected the io board and filter board, same thing.

Thank you !

--
You received this message because you are subscribed to the Google Groups "Hermes-Lite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/ec8cd722-76af-4103-9cec-95616d7f3618n%40googlegroups.com.

[Steve Haynal]

Hi Claude,

This sounds like your HL2 may have been programmed with a static IP. For some reason, this happens occasionally with some software. Please try the factory reset as described here:

https://github.com/softerhardware/Hermes-Lite2/wiki/Troubleshoot-Network

73,

Steve

kf7o