KEY/PTT

[Авточехол 26]

Good time! I insert the pedal into the front panel of the Hermes Lite into the KEY/PTT connector, when pressed, the transceiver switches to transmission and a carrier signal appears as if I inserted a CW key. How do I make it work like PTT?

[Andrew Williss]

you must use a stereo plug, tip-ring-sleeve. For PTT for voice i.e. SSB,

the PTT switch must be wired to Ring-Sleeve. 

The tip is for CW.

On Sun, 21 Dec 2025, 9:14 am Авточехол 26, <vady...@gmail.com> wrote:

Good time! I insert the pedal into the front panel of the Hermes Lite into the KEY/PTT connector, when pressed, the transceiver switches to transmission and a carrier signal appears as if I inserted a CW key. How do I make it work like PTT?

--
You received this message because you are subscribed to the Google Groups "Hermes-Lite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/29f50f0b-cb19-4d4f-9766-e802cddfd5c0n%40googlegroups.com.

[Larry KC6WOG]

In addition to Andrew's excellent advice, make sure your gateware is up to date, as detailed in the WIKI.

[Noel Woodfield]

Often simples, just make sure that this is NOT checked

To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/b49e3401-40f8-44ac-ae57-17f21ba5f99fn%40googlegroups.com.

[Авточехол 26]

Thank you, this setup helped me!

воскресенье, 21 декабря 2025 г. в 08:05:21 UTC+3, Noel Woodfield: