Testing Gateware 20210730_73p2 Released

424 views
Skip to first unread message

Steve Haynal

unread,
Jul 31, 2021, 12:40:16 AM7/31/21
to Hermes-Lite
Hi Group,

Please find the testing gateware 20210730_73p2 in the usual github location:

The details are in the readme at the above link. This is a testing release primarily to finalize the dual KSZ9021/KSZ9031 ethernet PHY support for the next build. Any and all testing and feedback is appreciated.

73,

Steve
kf7o

Matthew

unread,
Aug 4, 2021, 5:49:30 PM8/4/21
to Hermes-Lite
Hi Steve,

I've been running this for the past few days for both TX and RX. No problems to report.

73 Matthew M5EVT.

Steve Haynal

unread,
Aug 5, 2021, 2:22:14 AM8/5/21
to Hermes-Lite
Hi Matthew and Group,

Thanks for testing and providing feedback. I built and added all the variants for this release:

Most people will use the hl2b5up_main.rbf file found in the hl2b5up_main subdirectory. The 10RX cicrx gateware variants now have the extended response enabled for use with hermeslite.py as someone requested that. I will move this release to stable this weekend if there are no problems reported. This is the release that the August Makerfabs build will use.

73,

Steve
kf7o

Steve Haynal

unread,
Aug 9, 2021, 1:01:54 AM8/9/21
to Hermes-Lite
Hi Group,

I have moved this release to stable. You can now find it at:


Most people will download the .rbf file and use Quisk or SparkSDR to update gateware:

For those using hermeslite.py to update gateware, update_gateware_github will pull this latest first as the latest link is also updated.

For those using Raspberry Pi to update gateware, please disconnect from cable ethernet, turn on Wifi and connect to the internet, then double click the Update icon. This will pull the latest required gateware images. This is what Makerfabs does to update to the latest.

73,

Steve
kf7o

Roger David Powers

unread,
Aug 12, 2021, 6:22:49 PM8/12/21
to Hermes-Lite
> The 10RX cicrx gateware variants now have the extended response enabled for use with hermeslite.py 

I can confirm this worked as desired.

Regards,
RDP
Reply all
Reply to author
Forward
0 new messages