First beta release of v2.10.3.13 of Thetis for the HL2.
scumballc...@gmail.com
This is the first beta release of v2.10.3.13 of Thetis for the HL2.
https://github.com/mi0bot/OpenHPSDR-Thetis/releases/tag/v2.10.3.13-beta1
NB - The legacy spot support and code has been removed as it was not being maintained as had many issues. Use a 3rd party app via TCI such as Cluster-TCI-Bridge by OE3IDE to provide spots to the spectrum
This release contains the database manager. If you have other Anan radios, this release will work with them, but you must define separate databases and select the correct database with the -dbid: option. This release creates the shortcut with -dbid:HL2. As the official release of Thetis for the Anan series of radios is not HL2 aware, there may be issues if you try to use the official Thetis with a database that is HL2 aware. Please back up your databases.
There is no need for the official Thetis release to be installed before this release. If you have the official release installed, this release will not overwrite it.
No warranty or guarantee, use at your own risk. Do a backup of your current Thetis database just in case and ensure correct power output.
Reid Campbell
- [add] debug/test option to ignore ATT offset in displays and signal meters. Thetis identifies as an Icom !
- [add] bandwidth debug/test option to visualise the data in/out of Thetis
- [add] option for NR3 (RNnoise) to use a fixed gain for samples, the value of which is taken from VU3RDD's modified WDSP version
- [add] holding SHIFT when clicking an RX filter (main ui console or filter button container) will also set the TX filter. Note: the tx profile will be modified and will need saving if you want to keep this tx width at restart
- [add] now possible to select in/out channel pairs in cmASIO. Note: this must be done when the device is not currently being used. A restart of Thetis would then be required.
- [add] now possible to select channel for cmasio mic input
- [add] TCI spots also shown on rx2
- [add] dark mode title bars + windows now applies to diversity form
- [add] you can now click on a diversity memory pin in the 'radar' to select it
- [add] textcolor field added to TCI json payload for changing the spot colour text. Details here : https://github.com/ramdor/Thetis/commit/a9ce28bc62b612b1405d4eaf5d21cb12458ff802
- [add] Network Settings documentation pdf added for the change network settings. Can be found in shortcuts, or via the About box manual links
- [change] better handing of DirectX failure
- [change] if cpu% fails to show due to PerformanceCounter issues, the Volts/Amps will now not hide as a result of the failure if configured. Note: There is a discord post regarding recovery of the PerformanceCounters : https://discord.com/channels/1271453528656969789/1452525256303710228
- [change] the legacy spot support and code has been removed as it was not being maintained as had many issue. Use a 3rd party app via TCI such as Cluster-TCI-Bridge by OE3IDE to provide spots to the spectrum
- [change] a complete re-work of networking and radio setup. Please watch this video [TODO]
- [fix] ZZDM cat message query now returns the correct display mode number (#600)
- [fix] waterfall prevented from covering TCI spots
- [fix] diversity form now fades in along side console window at start up
- [fix] estimated notch width display will now display correctly. Previously was always using data from rx2
- [fix] 6m button on G2 panel not selecting 6m. Previously would select 60m, now selects 6m as it should
--
You received this message because you are subscribed to the Google Groups "Hermes-Lite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/00e6c4ae-3119-4152-879f-85eeb2404c9cn%40googlegroups.com.