Hi Jim,
Apologies for being a muppet, I'm failing to read the EEPROM. I've read the doc,. looked at QUISK but am none the wiser.
I'm trying to read the IP and MAC info from EEPROM so I can change the IP and/or MAC settings. An example, in the
log below I'm reading address x0D. Irrespective of the address, I get the same response with the address always returned in 0x1A.
Sent 60 bytes to
192.168.5.88:1025:
xEF-xFE-x05-x7F-x7D-x07-xAC-xDC-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00
Read 60 bytes from
192.168.5.88:1025:
xEF-xFE-x03-x00-x1C-xC0-xA2-x13-xDD-x49-x06-x00-x00-x00-x00-x00-x00-x00-x00-x04-x45-x03-x00-x07-xAC-xDC-x00-x00-x03-xB7-x00-x00-x00-x02-x00-x00-x80-x9F-x0A-xEE-x84-xE0-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00-x00