HL2 -no transmit power

[John Shoffner]

Greetings -

I had this thing doing well on it's first test startup a couple weeks ago. Made good power.  But I've been busy in final configurations off and on and apparently I've adjusted something that has stopped or is attenuating output that I just can't find now.

I've been through all the trouble tips and links here, best I could, but the HL2 version of Thetis doesn't align in every case with the original menus.  So I can't really tell what I changed or is not set now correctly that may be stopping output.

All in CW.

I do get the TX light and the relays are flicking. 

Good sidetone and waterfall shows a trace. 

Meter shows 0.

Keying TUN doesn't do it either.

I usually get there, but for the moment I'm stuck.  

Any suggestions welcome. Thank you.

John

Ko4mjc

[John Shoffner]

Well, it does make power - on my laptop as before.   So I need to do a bit of comparing versions, etc.

When I moved the HL2 to its permanent home, I fired up a desktop machine for it and reloaded Thetis and got involved in the update to v......10.  Somewhere in here is the issue. 

73

[John Shoffner]

Continuing here;

I appear to be running the same version of HL and HL2 (both P1) on two systems here, both running same version of Windows 10, (a desktop and a laptop).  On the desktop system I do not get the same HL2 Setup menus.  I do not have access to the PA Control tab or Enable Full Duplex, Enable PA.   On the desktop, it shows s Hermes Ctrl.   I'm pretty sure that's why the desktop does not produce an output.  

Can anybody point me in a direction?  

Thanks,

John

[Mike Lewis]

If you do not choose Hermes Lite then the HL2 features will not be available.

 

--
You received this message because you are subscribed to the Google Groups "Hermes-Lite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/31beaab7-6c21-48f6-8127-8210d40f8554n%40googlegroups.com.

[John Shoffner]

Dang! I just knew it was something stupid simple I missed. 

Looks like I got on the first set up but just blew through it on the last.  

We are back up and running!

Thanks, Mike!  You saved me a ton of overtime here.  I owe you  :-) 

Cheers and 73!
John