Second beta release of v2.10.3.13 of Thetis for the HL2.

[scumballc...@gmail.com]

This is the second beta release of v2.10.3.13 of Thetis for the HL2. Upgraded to latest released codebase of official Thetis Added ability to swap audio channels sent to hardware (Not tested) Corrected warning of incorrect SetPk value in PS form This release will require an update of the database by holding the Ctrl key while booting. Backup your database first. See details of official release of v2.10.3.13 - NB - The legacy spot support and code has been removed as it was not being maintained as had many issues. Use a 3rd party app via TCI such as Cluster-TCI-Bridge by OE3IDE to provide spots to the spectrum This release contains the database manager. If you have other Anan radios, this release will work with them, but you must define separate databases and select the correct database with the -dbid: option. This release creates the shortcut with -dbid:HL2. As the official release of Thetis for the Anan series of radios is not HL2 aware, there may be issues if you try to use the official Thetis with a database that is HL2 aware. Please back up your databases. There is no need for the official Thetis release to be installed before this release. If you have the official release installed, this release will not overwrite it. No warranty or guarantee, use at your own risk. Do a backup of your current Thetis database just in case and ensure correct power output.

[Авточехол 26]

Hi. Has anyone managed to connect HL via TCI? I've tried everything, but it doesn't work. The MSHV program

среда, 1 апреля 2026 г. в 18:31:47 UTC+3, scumballc...@gmail.com:

[Dalton Williams]

I am using TCI for spots and that works for me .

Dalton Williams

DeFever 41 MV Easy Living

20 Years & 34,800 Miles on the water

Amateur Radio W5EIM

Capital Yacht Club Member

MTOA Member 

AGLCA Member

--
You received this message because you are subscribed to the Google Groups "Hermes-Lite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/b03df9fa-0eba-4236-9114-1d8c0274d3dcn%40googlegroups.com.

[joe basque]

I am running the latest hl2 beta2 version.

Works fine for me using jtdx

I am connecting thru my lan. Using my laptop upstairs while HL2 is downstairs in the han shack

JTDX: setting

Tci for audio

Tci rx1client for radio

Joe

VE1BWV 

--

[Luc Laureys]

here no problems with Jtdx,Wsjt-x and mshv all working fine with tci and tci audio

ON7KEC

Op dinsdag 7 april 2026 om 06:11:15 UTC+2 schreef joe basque:

[Авточехол 26]

Вот мои настройки

вторник, 7 апреля 2026 г. в 08:01:53 UTC+3, Luc Laureys:

[gareth]

[Авточехол 26]

Everything worked, a complete reinstallation of Thetis helped

вторник, 7 апреля 2026 г. в 11:25:16 UTC+3, gareth:

[Owen Adair]

I installed Beta 2 (from v2.10.3.11) and it won’t start, complaining of a database issue.  Holding CTRL while starting didn’t help.   Anyone have this issue?  

I can start it with a new database, but that makes me ill to even think about. 😝

Owen KI4GT

[Ronald Meier]

Owen,

I deleted wsdpWisdom00 in AppData/Roaming/OpenHPSDR/Thetis-x64. Rebuild FFT and after that with Ctrl rebuild the database. This worked for me.

73 Ronald PH7R

Op maandag 20 april 2026 om 01:40:38 UTC+2 schreef Owen Adair:

[Owen Adair]

Thanks for your help! Deleting the wisdom file did indeed cause an FFT recalc, but still had the problem…. I realized that the CTRL key wasn’t getting recognized because of the User Access Control prompt that pops because Thetis wants to run as admin.   I turned off UAC (temporarily) and held down the CTRL key and started Thetis.  This let be upgrade the database which worked fine.

Appreciate you pointing me in the right direction… 73!

Owen KI4GT

On Apr 20, 2026, at 4:23 AM, Ronald Meier <rpmei...@gmail.com> wrote:

Owen,

You received this message because you are subscribed to a topic in the Google Groups "Hermes-Lite" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/hermes-lite/H5WliR8HBkY/unsubscribe.
To unsubscribe from this group and all its topics, send an email to hermes-lite...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/2cc5a165-b86b-407f-94cb-1f994b9426c8n%40googlegroups.com.