Re: Saturn SDR
114 views
Skip to first unread message
"Christoph v. Wüllen"
Mar 28, 2023, 5:01:59 AM3/28/23
to laur...@nicklebyhouse.co.uk, herme...@googlegroups.com
Then masquerading should be no problem. Take care that the
three constants used to convert ADC readings to fwd and reverse power
(Orion2 uses C1=5.0, C2=0.08, offset=18) do match.
The ADC voltage is generated on the RF board, BUT:
C1 implies that ADC readings from 0 to 4095 correspond to
input voltages from 0 to 5 Volt, if the Saturn uses 3.3 Volt
the constants most liklely to not work.
> Am 27.03.2023 um 19:56 schrieb <laur...@nicklebyhouse.co.uk> <laur...@nicklebyhouse.co.uk>:
>
> Yes they are identical registers.
>
>
three constants used to convert ADC readings to fwd and reverse power
(Orion2 uses C1=5.0, C2=0.08, offset=18) do match.
The ADC voltage is generated on the RF board, BUT:
C1 implies that ADC readings from 0 to 4095 correspond to
input voltages from 0 to 5 Volt, if the Saturn uses 3.3 Volt
the constants most liklely to not work.
> Am 27.03.2023 um 19:56 schrieb <laur...@nicklebyhouse.co.uk> <laur...@nicklebyhouse.co.uk>:
>
> Yes they are identical registers.
>
>
Reply all
Reply to author
Forward
0 new messages