HeeksCNC: offset on profile mode not correct

[Johannes Theuermann]

As you can see on the screenshot, I tried to create G-Code from an outside profile. The problem is, that the offset from the tool is not 'added' to the contour. If I change the 'outside' to 'inside' just the rollon is jumped into the line, and if I change to on the line also just the roll on is removed. The path keeps the same in all three settings. Changing the tools will also not work. In the inner pocket it works fine, just got this problem with the outside profile.

Has someone the same problem and what can I do or what settings should I use?

Thx for help

[Dan Heeks]

strange! can you send me the .heeks file?

Dan.

Dan Heeks.

--
You received this message because you are subscribed to the Google Groups "HeeksCAD - Users Mailing List" group.
To unsubscribe from this group and stop receiving emails from it, send an email to heekscad-user...@googlegroups.com.
To post to this group, send email to heeksca...@googlegroups.com.
Visit this group at http://groups.google.com/group/heekscad-users?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

[Johannes Theuermann]

here it is.

[Johannes Theuermann]

hi.
a month ago, are there some news for me? no idea?

thanks
Johannes