Today’s HYH

[Brett Neese]

Just to keep everyone in the loop, today’s notes from HYH was that there was no HYH because we were 1 short of quorum (7 members.)

We still managed to get some cleaning done, though, and I saw Cpro and others doing what appeared to be maintenance on the 3D printers. Thanks for your help guys!

Brett

[Cprossu]

Thanks for posting this!
Tchala

I redid the raspberry pi 4's power supply so it shouldn't undervolt anymore
Bruce.
I attempted to get the bed on Bruce more parallel to the floor rather than the wall next to it, but I think poor quality PLA caused my test print to fail, and I am unsure if the changes I made to the Z offset saved, so it will need to be looked at. Also the Raspberry Pi 3 B in that printer needs a suitable usb micro power supply to get rid of it's undervolt messages.

Also Rick worked on Ender Dragon to get the buildplate more level, but it still needs some work.

I also replenished the First Aid cabinet with a grainger refill kit on 08/23/2025 and I put a Bleeding Control Kit on top of it for easy access. 

[Rick Blake]

Followup on CPro's notes, Dragon seems to need to be recommissioned; calibration, inspect the nozzle, tram and re-level. I'll look at the left Z screw to see if I can reduce the wobble though that is usually not a problem. 

I've done this before, confident that Dragon will be running soon, though Monday is tight for me and tomorrow, Sunday, equally.

--
You received this message because you are subscribed to the Google Groups "HeatSync Labs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to heatsynclabs...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/heatsynclabs/63c0db69-27a6-4e9f-9087-ed6fe1779908n%40googlegroups.com.