Repairing a Hawkboard

[Subin Sebastian]

I have a Hawkboard here which is not working after a power supply issue from my side. I have over powered (accidentally connected a 12v adapter) the board and looks like I burned out something although I managed to pull out the cable right away. Is it possible to get it repaired? Can anyone here help me out with this?

--

Thanks & Regards

--

Subin Sebastian

[David Beck]

Hi,

there is a fuse soldered next to the power connector on the back side of the board. If you are lucky the only thing you need is to short circuit that.

Best regards, David

--
 
---
You received this message because you are subscribed to the Google Groups "hawkboard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hawkboard+...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

[J T Dsouza]

Most likely it will be much more than the fuse. There are onboard switchers. One of them will be fried.

Same thing happened to me. I got the spares, but had lost interest due to the terrible design flaws of the board.

[Sayan]

I have a spare working Hawkboard that I am willing to sell.

Let me know if you are interested

Thanks !

[Subin Sebastian]

I'm gonna to give a try to David's solution. :)

This one is the fuse, right David?

--

 
---
You received this message because you are subscribed to the Google Groups "hawkboard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hawkboard+...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

[David Beck]

Yes. Good luck!

Let me know how it went...

Apr 17, 2013 dátummal, 8:08 időpontban Subin Sebastian <subinse...@gmail.com> írta:

I'm gonna to give a try to David's solution. :)

This one is the fuse, right David?

<IMG_20130417_113034.jpg>