FW: 2 POPI files
Efremov Sergei
From: Peter Jones [mailto:jones_...@yahoo.com]
Sent: Saturday, December 29, 2012 10:13 PM
To: s...@simagis.com
Subject: Fw: 2 POPI files
Here are some more files that will not import correctly.
Best regards,
Pete
----- Forwarded Message -----
From: David Weldon <david...@wildcattechnologies.com>
To: Peter Jones <jones_...@yahoo.com>
Sent: Saturday, December 29, 2012 6:12 PM
Subject: 2 POPI files
Both the attached files are 647 starting at 180 degrees.
W. David Weldon
President
Wildcat Technologies, LLC
281.540.3208 (Main)
936.689.0535 (Cell)
832.644.1318 (FAX)
936.647.3440 (Voice Email)
This e-mail, including any attached files, may contain confidential, privileged or copyrighted information for the sole use of the intended recipient. Any review, use, distribution, or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive information for the intended recipient), please contact the sender by reply e-mail and delete all copies of this message.
Efremov Sergei
Hi Pete,
Sorry that I couldn’t answer you quickly because of the holidays. In fact they will last up to January, 9th. And my guys are off.
If the files you sent are urgent than I try to solve them.
Efremov Sergei
Yes, I’ve got the email from you with movie and I tried to import data you’ve sent by myself. I see that there is an error while trying to open imported samples but unfortunately my guys are at vacation, so we have to wait until they come, until this is that urgent.
Best regards,
Efremov Sergey
Smart Imaging Technologies Co.
From: Peter Jones [mailto:jones_...@yahoo.com]
Sent: Tuesday, January 01, 2013 11:49 PM
To: Efremov Sergei
Subject: Re: 2 POPI files
Sergey,
The new *.rox files that are generated with the purge cut off cause the program to lock up. You can load them, but not view them as trying to access the routine folder causes the program to lock. I sent you a movie, did you not get it?? In any case, we can't test the instrument until this is fixed and we can load data from the HAWK to GC-ROX.
Best regards,
Pete
Efremov Sergei
Hi David,
Could you please send me the samples from which you have produced those .rox files. I will try to figure out what is happening.
Efremov Sergei
From: David Weldon [mailto:david...@wildcattechnologies.com]
Sent: Wednesday, January 02, 2013 8:10 PM
To: Sergei Efremov
Subject: Re: FW: 2 POPI files
Sergey do you want the Rox or HAWK files?
Efremov Sergei
I need HAWK files.
Best regards,
Efremov Sergey
Smart Imaging Technologies Co.
From: David Weldon [mailto:david...@wildcattechnologies.com]
Sent: Wednesday, January 02, 2013 8:10 PM
To: Sergei Efremov
Subject: Re: FW: 2 POPI files
Sergey do you want the Rox or HAWK files?
On Jan 2, 2013 6:40 AM, "Efremov Sergei" <s...@simagis.com> wrote:
Efremov Sergei
Okay thank you! I will play with them tomorrow and tell you the result
Best regards,
Efremov Sergey
Smart Imaging Technologies Co.
From: David Weldon [mailto:david...@wildcattechnologies.com]
Sent: Wednesday, January 02, 2013 10:57 PM
To: Sergei Efremov
Subject: Fwd: 2 POPI files
Efremov Sergei
If you mean instrument log path than I believe that the place is here:
· Choose item “Settings” from upper menu (where System, Windows etc.)
· Choose “Setting system directories”
· In the opened form find “source_data”, choose it and change “log_files_location” there.
Best regards,
Efremov Sergey
Smart Imaging Technologies Co.
From: David Weldon [mailto:david...@wildcattechnologies.com]
Sent: Wednesday, January 02, 2013 11:06 PM
To: Efremov Sergei
Subject: RE: 2 POPI files
Can you tell me where I change the HAWK-Eye log file location within HAWK-Eye?
David
From: Efremov Sergei [mailto:s...@simagis.com]
Sent: Wednesday, January 02, 2013 11:02 AM
To: 'David Weldon'
Cc: hawk...@googlegroups.com
Subject: RE: 2 POPI files
Okay thank you! I will play with them tomorrow and tell you the result
Efremov Sergei
I am sorry I forgot to ask you also background and standard samples that you have used for these POPI samples
And standard values for standard sample
Efremov Sergei
I mean can you give me any background and standard samples that you have burned recently? I can do calibration by myself.
Best regards,
Efremov Sergey
Smart Imaging Technologies Co.
From: David Weldon [mailto:david...@wildcattechnologies.com]
Sent: Wednesday, January 02, 2013 11:58 PM
To: Efremov Sergei
Subject: Re: 2 POPI files
Those two files are not calibrated.
David
--
Efremov Sergei
Okay I see
Best regards,
Efremov Sergey
Smart Imaging Technologies Co.
From: David Weldon [mailto:david...@wildcattechnologies.com]
Sent: Thursday, January 03, 2013 12:13 AM
To: Efremov Sergei
Subject: Re: 2 POPI files
I has doing some experiments with changing the starting temperature, the two files I sent were started at 180, to calibrate I would have to run a blank and STD using that method so I did not.
David
Efremov Sergei
David gave me the original HWK files that instrument has produced. He said also that he have not run calibration for them so we will not be able to know the amount of real physical matter.
Anyway I tomorrow I will try to play with them and tell you the results.
Best regards,
Efremov Sergey
Smart Imaging Technologies Co.
From: Peter Jones [mailto:jones_...@yahoo.com]
Sent: Saturday, December 29, 2012 10:13 PM
To: s...@simagis.com
Subject: Fw: 2 POPI files
Here are some more files that will not import correctly.
Best regards,
Pete
----- Forwarded Message -----
From: David Weldon <david...@wildcattechnologies.com>
To: Peter Jones <jones_...@yahoo.com>
Sent: Saturday, December 29, 2012 6:12 PM
Subject: 2 POPI files
Both the attached files are 647 starting at 180 degrees.
Efremov Sergei
Well it can but I think it should not.
Best regards,
Efremov Sergey
Smart Imaging Technologies Co.
From: David Weldon [mailto:david...@wildcattechnologies.com]
Sent: Thursday, January 03, 2013 12:19 AM
To: Sergei Efremov
Subject: RE: 2 POPI files
Will that cause a problem with a exported Rox file?
Efremov Sergei
Hi David,
Semen found that in order to export data into .rox format one have to check this:
· It is necessary to choose method before export. Samples with no method defined are exported incorrectly
· In case you export sample which isn’t calibrated be sure to choose “raw” option while exporting sample
In attachment there is one correctly exported rox file which includes two samples (647-180A.HWK and 647-180.HWK) that you sent me.
To check yourself control the size of the file. Correct file which includes one sample is bigger than 9kb
Best regards,
Efremov Sergey
Smart Imaging Technologies Co.
From: Efremov Sergei [mailto:s...@simagis.com]
Sent: Thursday, January 03, 2013 12:43 AM
To: David Weldon
Cc: hawk...@googlegroups.com
Subject: RE: 2 POPI files
Well it can but I think it should not.
Best regards,
Efremov Sergey
Smart Imaging Technologies Co.
From: David Weldon [mailto:david...@wildcattechnologies.com]
Sent: Thursday, January 03, 2013 12:19 AM
To: Sergei Efremov
Subject: RE: 2 POPI files
Will that cause a problem with a exported Rox file?
Efremov Sergei
Okay, Pete, try to import file into GC-ROX and tell me if something going wrong.
Best regards,
Efremov Sergey
Smart Imaging Technologies Co.
From: Peter Jones [mailto:jones_...@yahoo.com]
Sent: Thursday, January 03, 2013 9:32 PM
To: Efremov Sergei
Cc: David Weldon; <peter...@aramco.com>; <mno...@gmail.com>; <hawk...@googlegroups.com>
Subject: Re: 2 POPI files
Thanks so much for all the help Sergey!
Sent from my iPhone
<647-180AB-FOLDER_EXPORT_Data_Hawk_Eye.rox>