remote access by cache`

[mike]

I bought the key from cache` intersystem


I load the keys, it is working fine,


I can access the cprs as local ip address (router) 192.168.1.1


I can not access through my outside IP address 72.241......


is there any thing I need to do in terminal , is there any thing I
need to do in Cache` to verify the server?


I turned off the firewall completly and still have no connection.

I changed the zosv , still not working....:(((

Thanks

[Nancy Anthracite]

Turn on debugging in the RPC menu and look to see if you are using the old
broker or the new one. Old will have {XWB} and the new [XWB] in the
messages.

D ^XUP>EVE>1>Op>RPC>Debug>3>
then try to connect CPRS
then View the log in the same menu

--
Nancy Anthracite

[Steven McPhelan]

I am by no means a network expert.  But I believe this is not a Cache M issue.  I believe that 192.x.x.x is a non-routable IP address range.

--
Steve
FREEDOM, freedom is never as valued as when lost.

[Nancy Anthracite]

Note that the 72.241...... is likely routable.

--
Nancy Anthracite

[Steven McPhelan]

That is the question.  What is that 72.x.x.x address?  Is it just the gateway address of the ISP?  If so, can one still reach a 192.168.x.x on your local Lan without further set up beyond that gateway address?

[Nancy Anthracite]

If he is on the local network, the old broker will work but if he is coming
through on the Internet, it will not. Of course, there are a myriad of other
reasons it might not make the connection from the Internet, but doing what I
suggested will tell us a thing or two to get started on this problem.

--
Nancy Anthracite