Happy Bubbles

Contact owners and managers

1–30 of 73

Hi!

To learn more about the beacon presence detection system, visit https://www.happybubbles.tech/presence

The source code for the project, including hardware, firmware, and server code, is all located at: https://github.com/happy-bubbles/

More detailed documentation and guides are in the works. If you have any question, please post them here and I'll do my best to help!

0 selected

Srinu G80

12/5/21

Any BLE with Proximity ? any suggestions

Need a BLE with Proximity ? any suggestions?

unread,

Any BLE with Proximity ? any suggestions

Need a BLE with Proximity ? any suggestions?

12/5/21

Tiago Pereira

8/2/21

beacon with white light

hey, i having some troubles with a beacon. It shows a white light and doesn't give me any

unread,

beacon with white light

hey, i having some troubles with a beacon. It shows a white light and doesn't give me any

8/2/21

nemik, … Ed Ringers10

10/17/18

2018 Hiatus

Nevermind. I found the post you said that using one antenna for bluetooth+wifi is not working that

unread,

2018 Hiatus

Nevermind. I found the post you said that using one antenna for bluetooth+wifi is not working that

10/17/18

ad...@itiellc.com

7/18/18

Presence Server Problem

I am getting the following error when trying to run presence server on linux. panic: dial tcp [::1]:

unread,

Presence Server Problem

I am getting the following error when trying to run presence server on linux. panic: dial tcp [::1]:

7/18/18

Dustin Arbogast, nemik3

6/27/18

New version keeps crashing

Thank you for replying. I am really sorry I believe this was me stepping on my own feet. I made a

unread,

New version keeps crashing

Thank you for replying. I am really sorry I believe this was me stepping on my own feet. I made a

6/27/18

Mspinolo, … Adrian Bishop5

6/26/18

More than 1 presence detector per room

i would also be interested in the config you use On Thursday, June 21, 2018 at 7:10:15 AM UTC+10,

unread,

More than 1 presence detector per room

i would also be interested in the config you use On Thursday, June 21, 2018 at 7:10:15 AM UTC+10,

6/26/18

Sebastian Ditz, … David Spreekmeester3

6/20/18

Try before buy

I have been successfully running an equivalent setup with two Happy Bubbles and two Android devices

unread,

Try before buy

I have been successfully running an equivalent setup with two Happy Bubbles and two Android devices

6/20/18

doug.p...@gmail.com, … nemik4

6/20/18

Expand support to include std Bluetooth devices?

Sorry, the hardware itself is made only for BLE and not standard Bluetooth. There's nothing that

unread,

Expand support to include std Bluetooth devices?

Sorry, the hardware itself is made only for BLE and not standard Bluetooth. There's nothing that

6/20/18

doug.p...@gmail.com, nemik2

6/20/18

How do I determine the version of the presence server that I am running?

The newer releases have this in the web UI at the top, but older versions did not. I'd suggest

unread,

How do I determine the version of the presence server that I am running?

The newer releases have this in the web UI at the top, but older versions did not. I'd suggest

6/20/18

Tom Griffin, nemik2

6/20/18

Presence detector Wifi configuration WPA-EAP support?

Tom, No, sorry. Certificate-based wifi auth is not supported at the moment. On Wednesday, June 20,

unread,

Presence detector Wifi configuration WPA-EAP support?

Tom, No, sorry. Certificate-based wifi auth is not supported at the moment. On Wednesday, June 20,

6/20/18

Adrian Bishop

6/17/18

Updated Docker image

Hi Just wonder if a new docker image is available for the latest version? Especially interested in

unread,

Updated Docker image

Hi Just wonder if a new docker image is available for the latest version? Especially interested in

6/17/18

Tyler Clemens, doug.p...@gmail.com2

6/12/18

Apple Watch

I agree it would be great. I just checked and was not able to see my 1st Gen Apple watch, even if I

unread,

Apple Watch

I agree it would be great. I just checked and was not able to see my 1st Gen Apple watch, even if I

6/12/18

Mspinolo, nemik8

5/27/18

Happy Bubbles: bought, now time to install. Some questions!

so an update on that! reverting to Mosquitto was not an issue: very quick to do an best for the

unread,

Happy Bubbles: bought, now time to install. Some questions!

so an update on that! reverting to Mosquitto was not an issue: very quick to do an best for the

5/27/18

Ben Friedland, nemik3

4/28/18

Solid red light after exiting config mode?

If you have the LED's enabled, they'll flash for about 200 ms every time it sees an

unread,

Solid red light after exiting config mode?

If you have the LED's enabled, they'll flash for about 200 ms every time it sees an

4/28/18

Nuno Dionísio, nemik2

4/25/18

Happy Bubbles firmware to be install in a NodeMCU + BLE HM-10

It's actually the NodeMCU V2, the thinner one with the CP2102 USB-serial chip. The BLE chip a

unread,

Happy Bubbles firmware to be install in a NodeMCU + BLE HM-10

It's actually the NodeMCU V2, the thinner one with the CP2102 USB-serial chip. The BLE chip a

4/25/18

Mari DeGrazia, nemik3

4/12/18

Presence Server working, but no changes topic

Thanks for the response. I did try the changes topic, and I was only able to get it to "trigger

unread,

Presence Server working, but no changes topic

Thanks for the response. I did try the changes topic, and I was only able to get it to "trigger

4/12/18

arbo...@gmail.com, nemik2

4/10/18

Beacon wont save settings

Sorry to hear that, I didn't write the firmware in the beacons, I buy those from a Chinese

unread,

Beacon wont save settings

Sorry to hear that, I didn't write the firmware in the beacons, I buy those from a Chinese

4/10/18

arbo...@gmail.com, Happy Bubbles Tech3

4/6/18

Possible to adjust power/range of the detectors?

Great to hear! On Fri, Apr 6, 2018, 16:33 <arbo...@gmail.com> wrote: I was able to turn the

unread,

Possible to adjust power/range of the detectors?

Great to hear! On Fri, Apr 6, 2018, 16:33 <arbo...@gmail.com> wrote: I was able to turn the

4/6/18

Nuno Dionísio, nemik5

3/30/18

Are Chipolos detected by Happy Bubbles

I was not expecting you to have bought them all, but could've set up some kind of community-based

unread,

Are Chipolos detected by Happy Bubbles

I was not expecting you to have bought them all, but could've set up some kind of community-based

3/30/18

Michael Smits, nemik8

3/24/18

Presence Server doesn't detect anything

Michael, Yes, that's correct. As I said, the detectors and the presence server are both MQTT

unread,

Presence Server doesn't detect anything

Michael, Yes, that's correct. As I said, the detectors and the presence server are both MQTT

3/24/18

Adrian Merwood, nemik2

3/11/18

New HB Install - found an iBeacon - what is it?

Adrian, Glad to hear you got things working. I'll try to answer your questions: 1. "raw

unread,

New HB Install - found an iBeacon - what is it?

Adrian, Glad to hear you got things working. I'll try to answer your questions: 1. "raw

3/11/18

ch...@fuzzyblender.com, nemik2

3/5/18

Tile?

Chris, To be honest I don't have any Tiles and haven't used them. They may take a while to

unread,

Tile?

Chris, To be honest I don't have any Tiles and haven't used them. They may take a while to

3/5/18

Jeroen de Vries, nemik5

3/2/18

Trying to flash happy bubble firmware on nodemcu

The baud rate I use is 115200, not 9600. Try that. I flash the BLE modules and NodeMCU on Linux. I

unread,

Trying to flash happy bubble firmware on nodemcu

The baud rate I use is 115200, not 9600. Try that. I flash the BLE modules and NodeMCU on Linux. I

3/2/18

Byron Poland, nemik2

3/1/18

Large amount of uploaded data.

Yea, it can be. The detectors just pass along all BLE advertisements they see over MQTT. Depending on

unread,

Large amount of uploaded data.

Yea, it can be. The detectors just pass along all BLE advertisements they see over MQTT. Depending on

3/1/18

jeroen...@gmail.com, nemik3

2/19/18

Happy Bubbles Presence Server question

Thanks for your reply. If i turn on the RPI with a monitor connected then i can login on a other

unread,

Happy Bubbles Presence Server question

Thanks for your reply. If i turn on the RPI with a monitor connected then i can login on a other

2/19/18

Mikeww1, nemik8

2/5/18

presence service with openhabianpi

Great! Sorry the installation is so minimal and specific to Raspbian for now, but I'm glad you

unread,

presence service with openhabianpi

Great! Sorry the installation is so minimal and specific to Raspbian for now, but I'm glad you

2/5/18

Mikeww1, nemik2

2/2/18

Presence Server under Windows

Sorry, I don't really know. I don't use windows and don't know much about it

unread,

Presence Server under Windows

Sorry, I don't really know. I don't use windows and don't know much about it

2/2/18

Mikeww1, nemik2

2/2/18

Blinking behaviour

Thanks for asking this, I'll update it in documentation. Blue blinks are for Eddystone, green

unread,

Blinking behaviour

Thanks for asking this, I'll update it in documentation. Blue blinks are for Eddystone, green

2/2/18

Mikeww1, nemik3

2/2/18

Programming the beacon

And to shut it off, just hold the button down for 5 seconds, it should blink blue a few times then

unread,

Programming the beacon

And to shut it off, just hold the button down for 5 seconds, it should blink blue a few times then

2/2/18

Mspinolo, nemik4

1/29/18

Info about Happy Bubbles

Yes the 30 days is assuming and 400ms or 500ms advertising interval and you're correct, if you

unread,

Info about Happy Bubbles

Yes the 30 days is assuming and 400ms or 500ms advertising interval and you're correct, if you

1/29/18