BMC for node X does not exist; power state cannot be determined

[Chris McClimans]

Thanks for the direction and help getting going, Tom. I'm getting pretty close.

[hh@b1 hanlon]$  bundle exec ./cli/hanlon image

Images:

         UUID                 Type                   ISO Filename            Status  

2GAgN2jTnKVg9JM6CwtP5   MicroKernel Image  hnl_mk_debug-image.2.0.0.118.iso  Valid  

4hhbFD69BEuZDfC9GffAuw  OS Install         ubuntu-12.04.2-server-amd64.iso   Valid  

[hh@b1 hanlon]$  bundle exec ./cli/hanlon node

Discovered Nodes

         UUID           Last Checkin  Status             Tags            

2AcehYIYy3xxijOT2UrqbX  59 sec        A       [cpus_6,Supermicro,nics_2]  

2K7p8KN7Braj8dpxStltEd  54 sec        A       [cpus_6,Supermicro,nics_2]  

2PE2xAeofbHgvEC8sNGigJ  50 sec        A       [cpus_6,Supermicro,nics_2]  

2NmC3w9s8T39IokNnK29oF  50 sec        A       [cpus_6,Supermicro,nics_2]  

2Oau3J2y7qkVCaTWHi0IqV  48 sec        A       [cpus_6,Supermicro,nics_2]  

4Y8PmZwmEpUMObX4ssX43z  3 sec         A       [cpus_6,Supermicro,nics_2]  

[hh@b1 hanlon]$  bundle exec ./cli/hanlon node get 2AcehYIYy3xxijOT2UrqbX

 Node:

 UUID =>  2AcehYIYy3xxijOT2UrqbX

 Last Checkin =>  11-16-14 01:52:41

 Status =>  active

 Tags =>  [cpus_6,Supermicro,nics_2]

 Hardware IDs =>  [00000000-0000-0000-0000-002590979F58]

[hh@b1 hanlon]$  bundle exec ./cli/hanlon node -h

Node Slice: used to view the current list of nodes (or node details)

Node Commands:

        hanlon node [get] [all] [--hw_id,-i HW_ID (options...)] Display list of nodes

        hanlon node [get] (UUID)                                Display details for a node

        hanlon node [get] (UUID) [--field,-f FIELD]         a    Display node's field values

            Note; the FIELD value can be either 'attributes' or 'hardware_ids'

        hanlon node [get] (UUID) [--bmc,-b]                     Display node's power status

        hanlon node update (UUID) --bmc,-b (BMC_POWER_CMD)      Run a BMC-related power command

            Note; the BMC_POWER_CMD can any one of 'on', 'off', 'reset', 'cycle' or 'softShutdown'

        hanlon node --help                                      Display this screen

[hh@b1 hanlon]$  bundle exec ./cli/hanlon node 2AcehYIYy3xxijOT2UrqbX --bmc

[node] [get_node_by_uuid] <-BMC for node with UUID [2AcehYIYy3xxijOT2UrqbX] does not exist; power state cannot be determined

[hh@b1 Hanlon-Microkernel]$ ssh -t t...@1.1.2.8 sudo lsmod | grep ipmi

t...@1.1.2.8's password: 

ipmi_watchdog 16384 0 - Live 0xf82ec000

ipmi_poweroff 12288 0 - Live 0xf82a7000

ipmi_devintf 12288 0 - Live 0xf82a3000

ipmi_si 32768 1 - Live 0xf8249000

ipmi_msghandler 28672 4 ipmi_watchdog,ipmi_poweroff,ipmi_devintf,ipmi_si, Live 0xf8554000

Connection to 1.1.2.8 closed.

[hh@b1 Hanlon-Microkernel]$ ssh -t t...@1.1.2.8 sudo ipmi-chassis --get-chassis-capabilities

t...@1.1.2.8's password: 

Intrusion sensor        : not provided

Front Panel Lockout     : not provided

Diagnostic Interrupt    : not provided

Power interlock         : not provided

FRU Info Device Address : 20h 

SDR Device Address      : 20h

SEL Device Address      : 20h

Sys Mgmt Device Address : 20h

Bridge Device Address   : 20h

Connection to 1.1.2.8 closed.

Not sure what's it's looking for...