Driver Galletto 1260 Windows 7 64 Bit
Melvin Amey
At first, my pc didnt detect the cable, after a lot of fiddling and many hours search the net. . . i unscrewed the casing on the 1260, disconnected the cable from the board and reconnected. now my pc detects the cable and it automatically searched and installed the drivers.
my pc is running vista, having searched the net ive discovered the software best works with xp, ive since uninstalled the drivers as windows had used existing drivers, not drivers that came with the disc. and ive selected the program (new serial) to run in XP compatability mode. ive not since tried it again but hoping to get onto it this afternoon. is there anything else that could be causing this issue? ive also massaged blacksmoke with the intention of buying a map file from them asking for helps and advice but ive had no response
Solution: The galletto 1260 is aimed at the Bosch EDC16C31 ecu which stamped on the label outside the ECU. If you want to program other ECUs, this cable will not work. If galletto is able to program your ECU, then the driver is faulty or misconfigured or the cable is bad or user error.
Problem: Plug the galletto 1260 cable into the vehicle OBD port, the red light flashes, then connect the USB to a rather old laptop and configure the device. When try to read ECU, the system report an error after 4 minutes.