LiDAR Point Cloud

62 views

Skip to first unread message

Alistair Mackenzie

unread,

Feb 10, 2025, 11:32:22 AM2/10/25

to LiDAR360 & LiDAR360MLS User Group

I have a LiDAR point cloud that has a large error in it where a portion of the site is significantly higher than the other, see attached image. I have tried doing a strip alignment and Trajectory alignment, but neither have helped. Does anyone have any suggestions as to how to get them aligned? Screenshot 2025-02-10 162757.png

Solaire Guo

unread,

Feb 10, 2025, 8:51:29 PM2/10/25

to LiDAR360 & LiDAR360MLS User Group

Dear Sir/Madam,

For cases where there is significant error between point cloud data, you can use the Data Registration feature under Data Management > Projections and Transformations in the toolbox. This allows you to align the point cloud data using methods such as ICP registration or manual registration. For detailed instructions, please refer to Section 1.5.8.5.8 in the LiDAR360 User Manual.