Spare part
Adriano Vazzoler
RICHARD YAMANE
Rick Yamane
Importer of Vape/Powerdynamo ignition systems and Polisher of bikes at Motion Pro
--
You received this message because you are subscribed to the Google Groups "Guzzi Singles" group.
To unsubscribe from this group and stop receiving emails from it, send an email to guzzi-single...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/guzzi-singles/bd7b3025-23bb-47dd-af86-8eef08bd6497n%40googlegroups.com.
Adriano Vazzoler
Adriano Vazzoler
RICHARD YAMANE
Rick Yamane
Importer of Vape/Powerdynamo ignition systems and Polisher of bikes at Motion Pro
To view this discussion visit https://groups.google.com/d/msgid/guzzi-singles/7144110c-77c4-47ba-af3f-a0704bfe8da5n%40googlegroups.com.
Adriano Vazzoler
I am rebuilding the Guzzi. The cable stop that screws into the top of the mag I had nickel plated. I remember having it and looking at the thread which had been damaged by the acid which they use to clean the metal before planting. I have had to replace other screws because of the acid cleaning. Thank you
RICHARD YAMANE
Rick Yamane
Importer of Vape/Powerdynamo ignition systems and Polisher of bikes at Motion Pro
To view this discussion visit https://groups.google.com/d/msgid/guzzi-singles/8aba1609-dfd7-480a-bc8a-da4f19c35761n%40googlegroups.com.
Adriano Vazzoler
Adriano Vazzoler
You can see it here painted black
Adriano Vazzoler
Adriano Vazzoler
This is the actual part I’m looking for. Thanks
pouma1954
Rick Yamane
You might be able to drill it out slightly and retap it for a different size adjuster. I think M6 would have been standard. Perhaps you can locate a M7 adjuster.
From: guzzi-...@googlegroups.com <guzzi-...@googlegroups.com>
On Behalf Of pouma1954
Sent: Friday, August 8, 2025 11:28 AM
To: guzzi-...@googlegroups.com
Subject: Re: [guzzi-singles] Spare part
Can't you make it or have it made?
Paul
Envoyé depuis mon appareil Galaxy
-------- Message d'origine --------
De : Adriano Vazzoler <adrianv...@hotmail.com>
Date : 08/08/2025 20:08 (GMT+01:00)
À : Guzzi Singles <guzzi-...@googlegroups.com>
Objet : Re: [guzzi-singles] Spare part
This is the actual part I’m looking for. Thanks
On Sunday, August 3, 2025 at 6:56:23 PM UTC+1 fuzz...@gmail.com wrote:
On Sunday, August 3, 2025 at 6:45:28 PM UTC+1 Adriano Vazzoler wrote:
You can see it here painted black
On Sunday, August 3, 2025 at 6:44:29 PM UTC+1 Adriano Vazzoler wrote:
On Sunday, August 3, 2025 at 6:42:39 PM UTC+1 richa...@comcast.net wrote:
So it is the bracket that holds the cable and the threaded adjuster screws into? Still recommend going to the parts manual and positively ID what you need and get the number.
Rick Yamane
Importer of Vape/Powerdynamo ignition systems and Polisher of bikes at Motion Pro
On 08/03/2025 10:37 AM PDT Adriano Vazzoler <fuzz...@gmail.com> wrote:
I am rebuilding the Guzzi. The cable stop that screws into the top of the mag I had nickel plated. I remember having it and looking at the thread which had been damaged by the acid which they use to clean the metal before planting. I have had to replace other screws because of the acid cleaning. Thank you
On Sunday, August 3, 2025 at 6:14:53 PM UTC+1 richa...@comcast.net wrote:
What I see missing here is a clevis pin. It looks like this is not a running motorcycle. There should also be a bracket to hold the cable housing. I would go look at your parts manual and see for sure what is all missing. The clevis pin I can't help with but you should be able to source one through a hardware supply. Online McMaster Carr is great for this stuff. You may need to get one slightly larger and machine it down. You'll also need a cotter pin.
Rick Yamane
Importer of Vape/Powerdynamo ignition systems and Polisher of bikes at Motion Pro
On 08/03/2025 9:57 AM PDT Adriano Vazzoler <adrianv...@hotmail.com> wrote:
To view this discussion visit https://groups.google.com/d/msgid/guzzi-singles/68964163.050a0220.373337.9e60%40mx.google.com.
MIKE CURTIS
On Aug 11, 2025, at 11:36 AM, Rick Yamane <ri...@motionpro.com> wrote:
You might be able to drill it out slightly and retap it for a different size adjuster. I think M6 would have been standard. Perhaps you can locate a M7 adjuster.
From: guzzi-...@googlegroups.com <guzzi-...@googlegroups.com> On Behalf Of pouma1954
Sent: Friday, August 8, 2025 11:28 AM
To: guzzi-...@googlegroups.com
Subject: Re: [guzzi-singles] Spare part
Can't you make it or have it made?
Paul
Envoyé depuis mon appareil Galaxy
-------- Message d'origine --------
De : Adriano Vazzoler <adrianv...@hotmail.com>
Date : 08/08/2025 20:08 (GMT+01:00)
À : Guzzi Singles <guzzi-...@googlegroups.com>
Objet : Re: [guzzi-singles] Spare part
This is the actual part I’m looking for. Thanks
On Sunday, August 3, 2025 at 6:56:23 PM UTC+1 fuzz...@gmail.com wrote:
On Sunday, August 3, 2025 at 6:45:28 PM UTC+1 Adriano Vazzoler wrote:
You can see it here painted black
On Sunday, August 3, 2025 at 6:44:29 PM UTC+1 Adriano Vazzoler wrote:
<~WRD0000.jpg>
On Sunday, August 3, 2025 at 6:42:39 PM UTC+1 richa...@comcast.net wrote:
So it is the bracket that holds the cable and the threaded adjuster screws into? Still recommend going to the parts manual and positively ID what you need and get the number.
Rick Yamane
Importer of Vape/Powerdynamo ignition systems and Polisher of bikes at Motion Pro
On 08/03/2025 10:37 AM PDT Adriano Vazzoler <fuzz...@gmail.com> wrote:
I am rebuilding the Guzzi. The cable stop that screws into the top of the mag I had nickel plated. I remember having it and looking at the thread which had been damaged by the acid which they use to clean the metal before planting. I have had to replace other screws because of the acid cleaning. Thank you
On Sunday, August 3, 2025 at 6:14:53 PM UTC+1 richa...@comcast.net wrote:
What I see missing here is a clevis pin. It looks like this is not a running motorcycle. There should also be a bracket to hold the cable housing. I would go look at your parts manual and see for sure what is all missing. The clevis pin I can't help with but you should be able to source one through a hardware supply. Online McMaster Carr is great for this stuff. You may need to get one slightly larger and machine it down. You'll also need a cotter pin.
Rick Yamane
Importer of Vape/Powerdynamo ignition systems and Polisher of bikes at Motion Pro
On 08/03/2025 9:57 AM PDT Adriano Vazzoler <adrianv...@hotmail.com> wrote:
<~WRD0000.jpg>