Stornello rear brake

[Danilo Gurovich]

I'm all but finished on the Stornello. I need a rear brake rod and associated adjusters. I also need to get a clean visual on how the brake switch is located.

Then it's time to fire up the beast!

Danilo Gurovich
Grosse Pointe Farms, MI

[dero...@comcast.net]

Here at Ebay Italy. Scott  http://www.ebay.it/itm/Bremsgestange-Hinterrad-Bremse-brake-rod-freno-Moto-Guzzi-Stornello-125-160-13-/121307670126?pt=LH_DefaultDomain_77&hash=item1c3e80266e

---

From: "Danilo Gurovich" <d...@gurovich.com>
To: guzzi-...@googlegroups.com
Sent: Sunday, March 8, 2015 8:59:41 AM
Subject: [guzzi-singles] Stornello rear brake

--
You received this message because you are subscribed to the Google Groups "Guzzi Singles" group.
To unsubscribe from this group and stop receiving emails from it, send an email to guzzi-single...@googlegroups.com.
To post to this group, send email to guzzi-...@googlegroups.com.
Visit this group at http://groups.google.com/group/guzzi-singles.
For more options, visit https://groups.google.com/d/optout.

[Don West]

Danilo

I made mine from some 6mm stainless bar, an end piece set from any jap bike and a universal clevis at the top end.  The gap at the top end between the pillion footpeg bracket and the swing arm is a bit tight but it just fits.

If you haven't got the pivot arm that the lever mounts on then, i would buy the one in the link.

Don

---

From: Danilo Gurovich <d...@gurovich.com>
To: guzzi-...@googlegroups.com

Sent: Sunday, 8 March 2015, 13:59

Subject: [guzzi-singles] Stornello rear brake

--
You received this message because you are subscribed to the Google Groups "Guzzi Singles" group.

To unsubscribe from this group and stop receiving emails from it, send an email to guzzi-singles+unsub...@googlegroups.com.