Welder Serial Number Search
Trudi Miranda
You can use the ASME Certificate Holder Search to find companies that have been evaluated and approved by ASME. Simply search for manufacturers by name, location, or certificate type to find information including the certificate type, number, scope, when the certificate was authorized, when it expires, and if it has been extended as well as contact information for the company.
When you use an ASME certified company as a source for parts or services, you can rest assured that the company has been assessed and certified based on its demonstrated ability to meet the requirements of an ASME standard. In this way, the ASME product certification programs provide a vital service to the enhancement of public safety and facilitation of international commerce.
When sourcing products and materials through an ASME certified company, you know that company's quality systems have been through a rigorous review process including an on-site assessment by a third-party review team.
The Standards & Certification process may involve independent, third-party inspection during the process, uniform qualification of inspectors, and acceptance by government entities. It is the common understanding and confidence and trust in this system that has enabled regulated equipment built in one jurisdiction to be readily accepted for installation in another.
The ARC Welding Technology department offers students the opportunity to pursue an Associates in Science degree or several certificates. The department is committed to preparing students for success in an exciting, in-demand career field. Our faculty have decades of industry experience. They work closely with local employers and our partners with the American Welding Society to ensure that you will gain the skills and training to have a successful career.
The Welding Technology degree provides skills and knowledge in manual and semi-automatic welding processes used in the metal fabrication and construction industries. Instruction covers materials, equipment, procedures, testing techniques as well as safety and blueprint reading. Competencies include techniques of joining ferrous and non-ferrous metals by the use of Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), Flux Cored Arc Welding (FCAW), and Gas Tungsten Arc Welding (GTAW), and welding procedures.
The Welding Technology Associate in Science (A.S.) degree may be obtained by completion of the required program, plus general education requirements, plus sufficient electives to meet a 60-unit total. See ARC graduation requirements.
Welding certification is recognized by the welding industry as an important step in the profession. The American Welding Society (AWS) nationally accredits American River College's welding program. The ARC welding program has met all the requirements of the AWS QC4 standards for Accreditation of Test Facilities for their Certified Welder Program. Graduating students may find positions in oil refineries, nuclear power plants, aerospace, structural buildings, bridge construction, auto industry, and small commercial fabricating shops.
This certificate promotes competence in plate and pipe welding. Emphasis is on power sources, electrode selection on various joint designs, techniques, and positions in welding. Instruction includes safety and proper procedures in making fillet and groove welds that are in compliance with structural and pipe welding codes.
The Welding Metallurgy and Inspection certificate provides the science of metallurgy and weld inspection. Emphasis is on the identification and selection of irons and steel, mechanical and physical properties of metals and crystal structures of metals, rules and regulations of the welding construction industry, and principles, requirements and methods of inspection.
This certificate provides skills and knowledge in manual and semi-automatic welding processes used in the metal fabrication and construction industries. Instruction covers materials, equipment, welding procedures, testing techniques, inspection, welding metallurgy, blueprint reading, and welding safety. Competencies include techniques of joining ferrous and non-ferrous metals by the use of Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW), Flux Cored Arc Welding (FCAW), and Gas Tungsten Arc Welding (GTAW). Oxyacetylene welding, oxyacetylene cutting and plasma arc cutting, are also covered.
Graduates may find employment in a number of industries including; pipe line construction, oil refining, aerospace, structural building, bridge construction, automotive, and small commercial fabricating. They may also work as welding shop supervisors and welding sales persons, and they can also become welding shop owners.
The Gas Metal Arc Welding certificate promotes competence in welding with different types of metal transfer, constant voltage power sources, different types of shielding gases, and electrode selection on various joint designs. Instruction is provided in gas metal and flux cored arc welding on fillet and groove welds to specific structural and pipe standards.
The Gas Tungsten Arc Welding certificate promotes competence in welding ferrous and nonferrous materials. Emphasis is on proper use of gas tungsten arc welding (GTA) equipment setup requirements, process variables, material requirements, and welding procedures that are in compliance with industry standards.
This certificate promotes competence in pipe welding with emphasis on power sources, electrode/filler metal selection on various joint designs, techniques, and positions for welding. Instruction includes safety, math, and proper procedures in making fillet and groove welds that are in compliance with structural and pipe welding codes.
Certificate completers may find employment in a number of industries, including PG&E pipeline construction, oil refining, power generation, structural building, bridge construction, and small commercial fabricating shops.
This certificate promotes competence in solving equipment, mathematical and manufacturing problems that apply to the welding trade. It emphasizes metal placement, measurement, and layout of tools used in construction, as well as the fundamentals of blueprint reading and welding equipment repair.
This course covers metal sculpture techniques, design principles, and materials used for sculpture for functional and nonfunctional art forms, on ferrous and non-ferrous metals. Techniques on the major welding processes such as Shielded Metal Arc, Gas Metal Arc, Gas Tungsten Arc, and Oxy-Acetylene are an integral part of the course, as well as related safety issues.
This course covers the basics of welding equipment maintenance, troubleshooting, and repair. Electrical and electronically controlled circuits are discussed and tested. Overall theory of operation and safety are presented, as well as maintenance scheduling and the use of electronic test equipment and other measuring devices. Field trips may be required.
This course provides individualized training for welder performance qualification. Code and test requirements are presented. Welders select the code, metal, process, and positions to be used. Preparation for competing in the SkillsUSA regional, state, and national competition is also covered. This course may be taken up to four times for credit with different competitions. A field trip and participation at the site of the SkillsUSA regional competition are required.
This course covers the theory, technique, application, and evaluation used in the material processing, welding, and inspection industries. Ultrasonic testing as applied to industry practices, such as building construction, aeronautics, shipbuilding, materials fabrication, and others, is covered. Successful completion of this course certifies that the requirements of the American Society of Nondestructive Testing (ASNT) TC-1A for UT level I are met.
This course covers advanced theory, technique application, and evaluation techniques used in the material processing, welding, and inspection industries. It covers advanced ultrasonic testing as applied to industry practices such as building construction, aeronautics, shipbuilding, and materials fabrication. Successful completion of this course meets the requirements of the American Society of Nondestructive Testing (ASNT) TC1-A for Ultrasonic Testing Level II.
This course covers the application of mathematics principles in technical and trade work. Areas covered are fundamentals of general mathematics, common fractions, decimal fractions, percent, signed numbers, measurements, customary measurement units, metric measurement units, steel rules and vernier calipers, fundamentals of algebra, basic algebraic operations, fundamentals of plane geometry, triangles, polygons, circles, areas, volumes, and fundamentals of trigonometry.
This course provides the opportunity to explore technical careers while developing valuable work and life skills. It is an introduction to a variety of technically-related occupations, emphasizing technical careers in the Sacramento area. Activities are designed to enhance personal development, employability skills, and self esteem through leadership, citizenship, and character development. This course is not open to students who have completed AT 107 or ET 250.
This course covers welding processes, knowledge, and skills specific to employers' needs. Workplace safety and etiquette are included. Metal fabrication skills for specific employment needs and welding certification testing are covered if requested by employers.
This course provides students with opportunities to develop marketable skills in preparation for employment or advancement within the welding field. It is designed for students interested in work experience and/or internships in associate degree level or certificate occupational programs. Course content includes understanding the application of education to the workforce, completion of Title 5 required forms which document the student's progress and hours spent at an approved work site, and developing workplace skills and competencies.
During the semester, the student is required to complete 27 hours of related work experience for 0.5 unit. An additional 27 hours of related work experience is required for each additional 0.5 units. All students are required to attend the first course meeting, a mid-semester meeting, and a final meeting. Additionally, students who have not already successfully completed a Work Experience course will be required to attend weekly orientations while returning participants may meet individually with the instructor as needed. Students may take up to 16 units total across all Work Experience course offerings. This course may be taken up to four times when there are new or expanded learning objectives. Only one Work Experience course may be taken per semester.