Internal control module error - (calculation error) ??

[Ducdude]

I ran the software on a 94 R1150 GS and got a searies of Internal control module error - (calculation error)  faults ..  I cleard them and the bike was and continues to operate properly.  The faults did not show back up after a short run.  Can you tell me what these codes mean or point me to a source for translateing just what the meanings are to all the various codes?

 

Thanks,

Eric

 

GS911 Version:804.1 Date:09/04/08

17427: Internal control module error - (calculation error) Control difference between processors

            The fault is not present now.

16659: Internal control module error - (calculation error) Control difference between processors

            The fault is not present now.

16915: Internal control module error - (calculation error) Control difference between processors

            The fault is not present now.

17171: Internal control module error - (calculation error) Control difference between processors

            The fault is not present now.

[PacificblueK]

My experience probably isn't relevant but I was plagued with similar
errors (02 K1200RS w/iABS) and eventually replaced the circuit board
inside the ABS from a donor. Not sure if it was a connection or the
board itself. All I know is I've got 5K miles without and issue
(knocking on wood).

Observation: if you convert your codes to Hex, the second hex digit
appears to have significance.

16659 - 0x4113
16915 - 0x4213
17171 - 0x4313
17427 - 0x4413


Please let me know if you find more information.