Vag 908 USB Driver 64 Bit

[Lean Eatma]

How to Install Vag 908 USB Driver 64 Bit for VAG-COM KKL CableIf you have a VAG-COM KKL cable and want to use it with Windows 64 bit operating system, you may need to install a special driver for it. The VAG-COM KKL cable is a diagnostic tool that allows you to communicate with your Audi, Volkswagen, Skoda or Seat vehicle via the OBD-II port. However, the cable may not work properly with the default Windows USB driver, especially if you have a newer version of Windows or a newer version of VAG-COM software.

In this article, we will show you how to install the Vag 908 USB driver 64 bit for your VAG-COM KKL cable, so you can use it with any compatible software such as VCDS-Lite, Ross-Tech VCDS or third-party applications. We will also provide some troubleshooting tips in case you encounter any problems during the installation or testing process.

Vag 908 USB Driver 64 Bit

Download Zip https://t.co/wJQP272luw

Step 1: Download and Install Vag 908 USB Driver 64 BitBefore you connect your VAG-COM KKL cable to your computer, you need to download and install the Vag 908 USB driver 64 bit. This driver will allow your computer to recognize the cable as a virtual COM port and communicate with it correctly. You can download the driver from this link[^3^].

Once you have downloaded the driver, unzip the file into any folder on your computer. Then follow these steps:

Go to Device Manager on your computer. You can access it by going to Control Panel > System > Device Manager on Windows Vista/7/8/10 or Control Panel > System > Hardware tab > Device Manager on Windows XP.Plug your VAG-COM KKL cable into any available USB port on your computer. You should see a new device appear under "Other devices" or "Ports (COM & LPT)" with a yellow exclamation mark next to it. This device is your cable that needs the driver.Right-click on the device and select "Update Driver". Depending on your Windows version, you may have to choose "Browse my computer for driver software" or "Let me pick from a list of device drivers on my computer".Click on "Have Disk" and browse to the folder where you unzipped the driver file. Select the file named "ftdiport.inf" and click "Open". Then click "OK".Select "USB Serial Port" from the list of compatible hardware and click "Next". The driver installation should start and finish successfully.You can check if the driver is installed correctly by looking at the device name under "Other devices" or "Ports (COM & LPT)". It should now say "USB Serial Port (COMx)" where x is a number between 1 and 4.Step 2: Discover Port Number that VAG-COM KKL Cable is UsingNow that you have installed the driver for your cable, you need to find out what COM port number it is using. This number is important because you will need to enter it in the software that you want to use with your cable. To find out the COM port number, follow these steps:

Go back to Device Manager on your computer and expand "Other devices" or "Ports (COM & LPT)". You should see your cable listed as "USB Serial Port (COMx)" where x is a number between 1 and 4.Right-click on your cable and select "Properties". Then click on the "Port Settings" tab and then on the "Advanced" button.You will see a box labeled "COM Port Number". This is the number that your cable is using. Make a note of it or remember it for later use.If the COM port number is above 4, you may want to change it to a lower number for compatibility reasons. To do so, click on the drop-down menu next to "COM Port Number" and select any number between 1 and 4 that is

 35727fac0c