Reloader 7 Load Data

[Daria]

Allof this reloading information has been provided by Nammo Lapua Oy and Nammo Vihtavuori Oy. The data given here were obtained in laboratory conditions following strictly the CIP (Commission International Permanente) June 13, 1990 and November 9, 1993 rules. The listed maximum loads have been determined according to the respective CIP/SAAMI maximum pressure specification, whichever is lower. These test methods have been deemed to be safe throughout the world. Pressure is measured at the case mouth or from inside the case according to the CIP.

DO NOT ATTEMPT ANY EXTRAPOLATIONS. PLEASE FOLLOW THE DATA AS WRITTEN. IT IS A MUST FOR EVERY RELOADER TO READ THE RELOADING SAFETY RULES.

Hornady Manufacturing Company develops and publishes reloading data for the Handbook of Cartridge Reloading. Occasionally, we will temporarily publish load data on this page when a bullet becomes available and is not yet listed in the latest edition of the handbook.

Obsolete reloading data that has been retired from our Handbook of Cartridge Reloading is available. Find information from previous Handbook editions, with reloading data for seldom-used cartridges that Hornady will no longer be developing.

Like the bound and eBook versions, the Hornady Reloading App provides all the information needed to successfully reload a variety of rifle and handgun cartridges. Plus you can save favorites, add notes and more. Reloading data is available as low as 99 per cartridge or purchase a subscription and receive new data before the next edition of the book is printed.

An invaluable resource for your bench, with over 900 pages representing data of all Hornady bullets. Each cartridge features applicable Hornady bullets along with velocity/powder charts for easy reference. Purchase your copy and get reloading results.

I am currently faced with something I would consider to be a bug:

I have a DataGrid which get's its data assigned in the LoadData event. Everything starts to work out, if I additionally set the data count attribute in the event.

However, I am unable to reload the data through e.g. a button click. I have changed the data on the backend database, but this is not reflected in the data grid. Additionally, when I enter a new record and click my button, I get the newly created record from the backend, but the changes of previous ones are not considered. For me, this means there is too much data cached and not renewed.

I did some additional analysis.

Apparently, new records are added to the datagrid if I create them on the backend and press the refresh button. Still, changes to already cached records are not updated.

So I did some more testing and looked at the data. The grid data is not showing the correct data unless there is a new record added or a recorded removed. I have debugged the grid load event and it is not getting the current data for records already bound to the grid. I am getting the data in the gridload event and have a timer that calls the grid0.reload() method every 10 seconds.

To me, it looks like the whole loaddata event has caching which prevents some functionalities.

For example the pagination does not work for me too when using the load data event.

Grid is showing the pages, but the pagesize is not considered and all records are presented.

This issue does not appear to be resolved and I'm dealing with the exact same problem. Edits do not appear in the grid unless I refresh the page (F5 or programmatically refresh). Adds and Deletes will appear, I can even insert a new record via SQL insert before clicking Save on an Edit operation - the new record will appear, but the changes do not. Clicking "Edit" on the same record will show the recent edits in edit window, but clicking "Save" will not show the edits on the grid.

I'm subscribing to the Dialog.Close() event, and calling Grid.Reload() in there.

The most ridiculous thing is that this same code works on another project without issue. Why will it not work here?

Hi all,

I have very similar issue. All CRUD operations work just fine (the changes appear in my database) but the datagrid only shows the CRUD changes after manually refreshing the page. I invoke a simple "await grid.Reload()" after any CRUD method, but it seems as if the reload() method does not do anything. I already tried a few things to try to get it to work, but without success.

Do I need something else besides the "await grid.Reload()" to get it to work?

I can corroborate that there are indeed cases where the LoadData method is called, but the grid doesn't reflect the data that was loaded, even if StateHasChanged() was called. I put some logging into the Blazor side, and I can see that while the Render event is triggered, the grid itself is not re-rendered. I find that the following workaround will do what you want it to do:

Is possible to load information into a document without having to load all the information previously uploaded?I mean,In a document I have monthly data for 2009, 2010 and 2011 and I want to add "March". It would be possible to add the new month without having to reload all the information?

Get the most performance from Federal components by using our carefully developed, high-performance reloading data. We are currently populating the cartridge drop-down menu with updated cartridge renderings, new propellants and bullets, and links to complementary product pages. Here you will find load data for some of the most recent cartridges on the market, with more being added frequently.

Reloading any cartridge requires a familiarity with safe, conservative reloading practices. When combined with personal discipline and attention to detail, such practices can help create a margin of safety for both the reloader and the shooter.

Lot-to-lot variations, design changes, or specification changes that are beyond our control may affect components mentioned in this book. To safely use this or any other guide or manual, you must keep yourself well informed on the technical progress of reloading. It is our belief that the information offered will result in safe operation if the proper equipment and components are employed in a reasonable manner.

When comparing different burning rate charts, one will notice variations in listed propellant ordering. Still, each such chart tells "the truth". Ranking differences result from use of different criteria. For example, a certain powder type can act slightly quicker than some other powder type, when used in 308 Winchester loads; however, when these powders are used in 7x64 loads, evident burning rates might reverse. Relative burning rate charts can never provide absolute data because too many factors are involved in how propellants burn within a cartridge chamber.

Eurenco Bofors produced the following chart, which we have published in our Norma Reloading Manual. Their ballisticians tested the same powder charge (43.2 grains) using the same bullet (143-grain FMJ) loaded in the 308 Winchester - they used IMR 4350 performance as a reference. This chart may not be any more accurate than any other but, compared to most, it does give significantly more information about how the relative burning rates were derived and it does relate to at least one real-world situation.

Any such data chart should be used ONLY as an INFORMATION GUIDE. Always refer to published data when reloading.

Say for a example I have some list of links that point to some posts and when a use clicks on those posts I want detailed data for each one of those posts to be displayed to the user. When the user view goes to the page this list is on, JSON is served up that looks a lot like this

The list renders out fine. The template contains an outlet for a PostView to render into so that user can click from post to post and have the details of each post displayed to him on the same page as the post list.

The trick is getting post date like Author, Content, Comments into these Post models that I have loaded into the store. I thought that when a user clicked on the #/posts/1 link the PostView would render into the outlet I have setup but that is not happening. It seems that @store.find just sees that there is a post with the given ID already in the store and just serves that up. How can I force him to query for the detailed data for a post stored at /posts/:id?

Query parameters are optional key-value pairs that appear to the right of the ? in a URL. For example, the following URL has two query params, sort and page, with respective values ASC and 2: =ASC&page=2 Query...

Hi @pixelhandler. Your solution probably would have worked for me had queryParamsDidChange not been broken. However, I was able to get the desired behavior by wrapping each link to a post in an action called getPostDetails like so

A call to /api/posts returns all posts. A call to /api/posts/123 returns a single post. But in both cases, the posts must have all the information. You can still work against that guideline, but you will need to fight a bit against the framework. Nothing too hard as you have seen, but still makes you think if you should face the problem in a different way.

I had the same problem earlier. I did not want to send all the information in the index for backend performance reasons.Sometimes because is a complex operation, other times because you have a model that has some information that never changes and a subset of information that changes a lot and that was f***ing with your cache expiration policy.

The load data contained on this site is intended for use with Barnes Bullets. Bullets from other manufacturers may not produce equivalent pressure or velocities; therefore, it is not recommended that this data be used with components other than as listed. Data contained herein is intended for use by individuals who are familiar with correct and safe handloading practices and procedures.

Because Barnes Bullets has no control over the individual loading practices and/or components used, no responsibility is implied or expressed by Barnes Bullets, Inc. in the use of this data. The information is to be used at the sole discretion of the user. This data replaces, supercedes and obsoletes any and all data previously published by Barnes Bullets, Inc.

3a8082e126