Cannot build USE_CUDA := 0. fatal error: cublas_v2.h: No such file or directory with

198 views
Skip to first unread message

Denis Susloparov

unread,
Dec 11, 2015, 9:45:25 AM12/11/15
to Greentea Users
Makefile.config:
# Contributions simplifying and improving our build system are welcome!

# GreenTea (ViennaCL/OpenCL) backend switch

# Enable the CUDA backend
USE_CUDA := 0

# Enable the OpenCL/Greentea backend
USE_GREENTEA := 0

# Folder of the ViennaCL header-only library
VIENNACL_DIR = ../ViennaCL

# Either set clBLAS to 1 or it will use ViennaclBLAS.
# CLBLAS should be faster, especially on AMD cards.
USE_CLBLAS := 1

# cuDNN acceleration switch (uncomment to build with cuDNN).
# USE_CUDNN := 1

# CPU-only switch (uncomment to build without GPU support).
# CPU_ONLY := 1

# uncomment to disable IO dependencies and corresponding data layers
# USE_OPENCV := 0
# USE_LEVELDB := 0
# USE_LMDB := 0

# uncomment to allow MDB_NOLOCK when reading LMDB files (only if necessary)
# You should not set this flag if you will be reading LMDBs with any
# possibility of simultaneous read and write
# ALLOW_LMDB_NOLOCK := 1

# Uncomment if you're using OpenCV 3
OPENCV_VERSION := 3

# To customize your choice of compiler, uncomment and set the following.
# N.B. the default for Linux is g++ and the default for OSX is clang++
# CUSTOM_CXX := g++

# CUDA directory contains bin/ and lib/ directories that we need.
CUDA_DIR := /usr/local/cuda
# On Ubuntu 14.04, if cuda tools are installed via
# "sudo apt-get install nvidia-cuda-toolkit" then use this instead:
# CUDA_DIR := /usr

# CUDA architecture setting: going with all of them.
# For CUDA < 6.0, comment the *_50 lines for compatibility.
CUDA_ARCH := -gencode arch=compute_20,code=sm_20 \
-gencode arch=compute_20,code=sm_21 \
-gencode arch=compute_30,code=sm_30 \
-gencode arch=compute_35,code=sm_35 \
-gencode arch=compute_50,code=sm_50 \
-gencode arch=compute_50,code=compute_50

# BLAS choice:
# atlas for ATLAS (default)
# mkl for MKL
# open for OpenBlas
BLAS := atlas
# Custom (MKL/ATLAS/OpenBLAS) include and lib directories.
# Leave commented to accept the defaults for your choice of BLAS
# (which should work)!
# BLAS_INCLUDE := /path/to/your/blas
# BLAS_LIB := /path/to/your/blas

# Homebrew puts openblas in a directory that is not on the standard search path
# BLAS_INCLUDE := $(shell brew --prefix openblas)/include
# BLAS_LIB := $(shell brew --prefix openblas)/lib

# This is required only if you will compile the matlab interface.
# MATLAB directory should contain the mex binary in /bin.
# MATLAB_DIR := /usr/local
# MATLAB_DIR := /Applications/MATLAB_R2012b.app

# NOTE: this is required only if you will compile the python interface.
# We need to be able to find Python.h and numpy/arrayobject.h.
PYTHON_INCLUDE := /usr/include/python2.7 \
/usr/lib/python2.7/dist-packages/numpy/core/include
# Anaconda Python distribution is quite popular. Include path:
# Verify anaconda location, sometimes it's in root.
# ANACONDA_HOME := $(HOME)/anaconda
# PYTHON_INCLUDE := $(ANACONDA_HOME)/include \
# $(ANACONDA_HOME)/include/python2.7 \
# $(ANACONDA_HOME)/lib/python2.7/site-packages/numpy/core/include \

# We need to be able to find libpythonX.X.so or .dylib.
PYTHON_LIB := /usr/lib
# PYTHON_LIB := $(ANACONDA_HOME)/lib

# Homebrew installs numpy in a non standard path (keg only)
# PYTHON_INCLUDE += $(dir $(shell python -c 'import numpy.core; print(numpy.core.__file__)'))/include
# PYTHON_LIB += $(shell brew --prefix numpy)/lib

# Uncomment to support layers written in Python (will link against Python libs)
# WITH_PYTHON_LAYER := 1

# Whatever else you find you need goes here.
INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include /usr/local/include /usr/include/hdf5/serial/ /usr/local/lib /usr/lib /usr/lib/x86_64-linux-gnu/hdf5/serial /usr/local/include /usr/include/hdf5/serial
LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib /usr/local/lib /usr/lib /usr/lib/x86_64-linux-gnu/hdf5/serial

# If Homebrew is installed at a non standard location (for example your home directory) and you use it for general dependencies
# INCLUDE_DIRS += $(shell brew --prefix)/include
# LIBRARY_DIRS += $(shell brew --prefix)/lib

# Uncomment to use `pkg-config` to specify OpenCV library paths.
# (Usually not necessary -- OpenCV libraries are normally installed in one of the above $LIBRARY_DIRS.)
# USE_PKG_CONFIG := 1

BUILD_DIR := build
DISTRIBUTE_DIR := distribute

# Uncomment for debugging. Does not work on OSX due to https://github.com/BVLC/caffe/issues/171
# DEBUG := 1
# VIENNACL_DEBUG := 0

# The ID of the GPU that 'make runtest' will use to run unit tests.
TEST_GPUID := 0

# enable pretty build (comment to see full commands)
Q ?= @
cmake output:
-- Boost version: 1.58.0
-- Found the following Boost libraries:
--   system
--   thread
--   filesystem
-- Found gflags  (include: /usr/include, library: /usr/lib/x86_64-linux-gnu/libgflags.so)
-- Found glog    (include: /usr/include, library: /usr/lib/x86_64-linux-gnu/libglog.so)
-- Found PROTOBUF Compiler: /usr/bin/protoc
-- Found lmdb    (include: /usr/include, library: /usr/lib/x86_64-linux-gnu/liblmdb.so)
-- Found LevelDB (include: /usr/include, library: /usr/lib/x86_64-linux-gnu/libleveldb.so)
-- Found Snappy  (include: /usr/include, library: /usr/lib/x86_64-linux-gnu/libsnappy.so)
CMake Warning at cmake/Dependencies.cmake:63 (message):
  -- CUDA is not detected by cmake.  Building without it...
Call Stack (most recent call first):
  CMakeLists.txt:49 (include)


-- Found ViennaCL include: /usr/include
-- OpenCV found (/usr/share/OpenCV)
-- Found Atlas (include: /usr/include, library: /usr/lib/libatlas.so)
-- NumPy ver. 1.8.2 found (include: /usr/lib/python2.7/dist-packages/numpy/core/include)
-- Boost version: 1.58.0
-- Found the following Boost libraries:
--   python
-- Could NOT find Doxygen (missing:  DOXYGEN_EXECUTABLE) 
-- 
-- ******************* Caffe Configuration Summary *******************
-- General:
--   Version           :   <TODO> (Caffe doesn't declare its version in headers)
--   Git               :   rc2-1088-g52732be
--   System            :   Linux
--   C++ compiler      :   /usr/bin/c++
--   Release CXX flags :   -O3 -DNDEBUG -fopenmp -fPIC -Wall -std=c++11 -DCMAKE_BUILD -Wno-sign-compare -Wno-uninitialized
--   Debug CXX flags   :   -g -fopenmp -fPIC -Wall -std=c++11 -DCMAKE_BUILD -Wno-sign-compare -Wno-uninitialized
--   Build type        :   Release
-- 
--   BUILD_SHARED_LIBS :   ON
--   BUILD_python      :   ON
--   BUILD_matlab      :   OFF
--   BUILD_docs        :   ON
--   CPU_ONLY          :   OFF
--   USE_OPENCV        :   ON
--   USE_LEVELDB       :   ON
--   USE_LMDB          :   ON
--   ALLOW_LMDB_NOLOCK :   OFF
-- 
-- Dependencies:
--   BLAS              :   Yes (Atlas)
--   Boost             :   Yes (ver. 1.58)
--   glog              :   Yes
--   gflags            :   Yes
--   protobuf          :   Yes (ver. 2.6.1)
--   lmdb              :   Yes (ver. 0.9.15)
--   LevelDB           :   Yes (ver. 1.18)
--   Snappy            :   Yes (ver. 1.1.3)
--   OpenCV            :   Yes (ver. 2.4.9)
--   CUDA              :   No
-- 
-- Python:
--   Interpreter       :   /usr/bin/python2.7 (ver. 2.7.10)
--   Libraries         :   /usr/lib/x86_64-linux-gnu/libpython2.7.so (ver 2.7.10)
--   NumPy             :   /usr/lib/python2.7/dist-packages/numpy/core/include (ver 1.8.2)
-- 
-- Documentaion:
--   Doxygen           :   No
--   config_file       :   
-- 
-- Install:
--   Install path      :   /home/denis/temp/caffe/build/install
-- 
-- Configuring done
-- Generating done
-- Build files have been written to: /home/denis/temp/caffe/build
make output:
[  1%] Built target proto
[  1%] Building CXX object src/caffe/CMakeFiles/caffe.dir/solver.cpp.o
In file included from /home/denis/temp/caffe/include/caffe/common.hpp:5:0,
                 from /home/denis/temp/caffe/include/caffe/blob.hpp:8,
                 from /home/denis/temp/caffe/include/caffe/net.hpp:10,
                 from /home/denis/temp/caffe/src/caffe/solver.cpp:10:
/home/denis/temp/caffe/build/caffe_config.h:40:0: warning: "USE_OPENCV" redefined
 #define USE_OPENCV
 ^
<command-line>:0:0: note: this is the location of the previous definition
In file included from /home/denis/temp/caffe/include/caffe/common.hpp:5:0,
                 from /home/denis/temp/caffe/include/caffe/blob.hpp:8,
                 from /home/denis/temp/caffe/include/caffe/net.hpp:10,
                 from /home/denis/temp/caffe/src/caffe/solver.cpp:10:
/home/denis/temp/caffe/build/caffe_config.h:41:0: warning: "USE_LEVELDB" redefined
 #define USE_LEVELDB
 ^
<command-line>:0:0: note: this is the location of the previous definition
In file included from /home/denis/temp/caffe/include/caffe/common.hpp:5:0,
                 from /home/denis/temp/caffe/include/caffe/blob.hpp:8,
                 from /home/denis/temp/caffe/include/caffe/net.hpp:10,
                 from /home/denis/temp/caffe/src/caffe/solver.cpp:10:
/home/denis/temp/caffe/build/caffe_config.h:42:0: warning: "USE_LMDB" redefined
 #define USE_LMDB
 ^
<command-line>:0:0: note: this is the location of the previous definition
In file included from /home/denis/temp/caffe/include/caffe/common.hpp:26:0,
                 from /home/denis/temp/caffe/include/caffe/blob.hpp:8,
                 from /home/denis/temp/caffe/include/caffe/net.hpp:10,
                 from /home/denis/temp/caffe/src/caffe/solver.cpp:10:
/home/denis/temp/caffe/include/caffe/util/device_alternate.hpp:41:23: fatal error: cublas_v2.h: No such file or directory
compilation terminated.
src/caffe/CMakeFiles/caffe.dir/build.make:54: recipe for target 'src/caffe/CMakeFiles/caffe.dir/solver.cpp.o' failed
make[2]: *** [src/caffe/CMakeFiles/caffe.dir/solver.cpp.o] Error 1
CMakeFiles/Makefile2:218: recipe for target 'src/caffe/CMakeFiles/caffe.dir/all' failed
make[1]: *** [src/caffe/CMakeFiles/caffe.dir/all] Error 2
Makefile:116: recipe for target 'all' failed
make: *** [all] Error 2




Reply all
Reply to author
Forward
0 new messages